HARLEY-DAVIDSON 10S Motorcycle Bluetooth Communication System User Guide

HARLEY-DAVIDSON 10S Motorcycle Bluetooth Communication System

• You can download the full version of the manual and view other Harley-davidson products at the website: www.H-D.com/infotainment-support.

PREPARATION

Knowing the Headset Layout

Installing the Headset

BASIC OPERATION

Operating the Buttons

• Tap the button
• Double tap the button
• Press and hold the button for 5 seconds
• Press the two buttons at the same time
• Rotate the Jog Dial

Turning On/Off the Headset

Simultaneously press and hold the Jog Dial and the Phone Button for 1 second to turn on or off the headset.

Adjusting the Volume

Checking the Battery Level

• Turn on the headset and check the battery level via the Status LED.
• Or, press and hold the Jog Dial and the Phone Button for 3 more seconds when the headset turns on. You will hear a triple beep and a voice prompt.

Charging the Battery

PAIRING

Pairing with WHIM

Pairing with Mobile Devices – Phone, Music

Using Phone Features

• After Pairing…
  • Answering Calls

Using the Speed Dial

Listening to Music

INTERCOM

Pairing with Other Headsets

Using the Intercom

After Pairing…

You can start or end a two-way intercom conversation with each headset.

RADIO

Turning On/Off the FM Radio

Seeking Stations

Listening to Preset Stations

Saving or Deleting Stations

SETTING
Method1) Using the headset

Method2) Using the Boom Audio Bluetooth Device Manager
Connect the headset to your computer via a USB cable. Launch the Boom Audio Bluetooth Device Manager and click DEVICE SETTING to configure the headset settings. For details about downloading the Boom Audio Bluetooth Device Manager, please visit www.H-D.com/infotainment-support.

Method3) Using the Sena Motorcycles App
On your smartphone, download the Sena Motorcycles App for Android or iPhone from Google Play or App Store.

TROUBLESHOOTING

Factory Reset
If you want to restore the Boom! Audio 10S to factory default settings, press and hold the Phone Button for 10 seconds. Tap the Jog Dial. The headset automatically restores the default settings and turns off.

Fault Reset
If the Boom! Audio 10S is not working properly for any reason, push the pin- hole reset button located on the back of the headset.

Customer Support: www.H-D.com/infotainment-support

Boom! Audio 10S Quick Reference

• www.H-D.com/infotainment-support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>