HARLEY-DAVIDSON FURY N04 Motorcycles App User Guide

HARLEY-DAVIDSON FURY N04 Motorcycles App

Downloadable Software

Download the Sena Motorcycles App on Google Play Store or App Store.

Sena Motorcycles

• Device configuration setting

Download the following items at www.H-D.com/infotainmentsupport.

Boom Audio Bluetooth Device Manager

• Firmware upgrade
• Device configuration setting

Quick Start Guide, User’s Guide

Customer Support:www.H-D.com/infotainment-support

Product Details

Putting on the Helmet

Gently pull the padded chinstrap outward and slide the helmet onto your head. Route the chinstrap under your chin, then thread it through both D-Rings. To fasten securely, thread the chinstrap back through the D-Ring closest to your neck, and pull.

Note: Check the chinstrap’s position and tension regularly to ensure proper fit.

Accessory Installation: Visor

Harley-Davidson provides both a long and short visor in the package. Align the buttons of the visor with the helmet and press hard to attach.

Icon Legend

• Tap button the specified number of times
• Press and Hold button for the specified amount of time
• “Hello” Audible prompt

Basic Operations

Checking the Battery Level

Phone Pairing

1. Select FURY N04 in the list of Bluetooth devices detected.

• The Bluetooth system will enter the Phone Pairing mode automatically when you initially turn on the Bluetooth system.
• For more information on phone pairing, refer to the User’s Guide.

Bluetooth Pairing with WHIM

• Pairing with WHIM

Using the Phone

Music Control

Mesh Intercom™

• Open Mesh™: communication within the same channel.
• Group Mesh™: communication within the same private group.
  • For more information on Mesh Intercom, refer to the User’s Guide.

Note: When Mesh Intercom is on, the FURY N04 will automatically connect to nearby FURY N04 users and the Bluetooth system will be in Open Mesh (default: channel 1) initially.

Open Mesh

Channel Setting (Default: channel 1) in Open Mesh

Using the Button

1. Enter into the Channel Setting.
2. Navigate between channels. (1 2  •••  8  9  Exit  1 •••)
3. Save the channel.

Using the Sena Motorcycles App
You can select the channel through the Sena Motorcycles App.

Group Mesh

Group Mesh is a closed group intercom function that allows users to join, leave, or rejoin a group intercom conversation without pairing each Bluetooth system.

Creating a Group Mesh
Creating a Group Mesh requires two or more Open Mesh users.

1. Users (You, B, and C) enter into Mesh Grouping to create a Group Mesh.
2. When Mesh Grouping is completed, the users (You, B and C) will hear a voice prompt on their Bluetooth system as Open Mesh switches to Group Mesh.

Joining an Existing Group Mesh
One of the current users in an Existing Group Mesh can allow new users (one or more) in Open Mesh to join the Existing Group Mesh.

1. One (You) of the current users in the Existing Group Mesh and new users (D and F) in Open Mesh enter into Mesh Grouping to join the Existing Group Mesh.

Enable/Disable Mic (Default: Enable)
Users can enable/disable the microphone when communicating in a Mesh Intercom.

Reset Mesh
If a Bluetooth system in an Open Mesh or Group Mesh resets the Mesh, it will automatically return to Open Mesh (default: channel 1).

FM Radio

Note: You can also save the current station from the Sena Motorcycles App.

Configuration Menu

Troubleshooting

Note: Fault Reset will not restore the Bluetooth system to the factory default settings.

Quick Reference

References

• Login | Harley-Davidson SIP

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>