Wharfedale Pro DELTA-AXF12 Active Speaker User Guide

Wharfedale Pro DELTA-AXF12 Active Speaker

Product Information

The DELTA-AXF12 and DELTA-AXF15 are active 2-way bi-amplified speakers designed by Wharfedale Pro. They are part of the Delta series and offer high- quality sound reproduction for various applications.

Key Specifications:

• Model Name: DELTA-AXF12 / DELTA-AXF15
• System Type: Active 2-way Bi-Amplified
• Frequency Response (+/-3 dB): 60 Hz – 20 KHz (DELTA-AXF12), 50 Hz – 20 KHz (DELTA-AXF15)
• Frequency Range (-10 dB): 55 Hz – 20 KHz (DELTA-AXF12), 45 Hz – 20 KHz (DELTA-AXF15)
• Calculated Maximum SPL @1 m: 130.5 dB (DELTA-AXF12), 131.5 dB (DELTA-AXF15)
• Low-Frequency Transducer Size: 332 mm / 12 inches (DELTA-AXF12), 404 mm / 15 inches (DELTA-AXF15)
• High-Frequency Transducer Type: Coil Size (mm/inches) Exit Size ( mm / inches) Diaphragm Material Impedance
• Nominal Coverage (H x V): Amplifiers
• Amplifier Design: Class D
• Power Rating: 1600 W Peak (1400 W LF + 200 W HF), 800 W Continuous (700 W LF + 100 W HF)
• Power On Protection: Thermal Protection, Low Line Voltage Shut Down, Driver Protection, DC and Short Protection, Clip Limiter
• Limiter Indicator: Power Indicator
• Line Output Connector: XLR 1/4 Combo jack / 2 x RCA
• Impedance Balanced Loop Gain: Balanced: 200 Unbalanced: 100
• AC Power details – Power Supply: AC100-120 V~/220-240 V~,50/60 Hz
• Hardware – Rigging: M10 x 6 Dual Angle (0 or 10) 35 mm Pole Socket
• Enclosure Material and finish: 15 mm Plywood Black Rhino Paint
• Colour Options: Steel
• Grille Material & Finish: 1.5 Steel
• Unpacked dimensions – Height: 640 mm / 25.2 inches (DELTA-AXF12), 700 mm / 27.56 inches (DELTA-AXF15)
• Unpacked dimensions – Width (Front): 390 mm / 15.35 inches (DELTA-AXF12), 446 mm / 17.56 inches (DELTA-AXF15)
• Unpacked dimensions – Width (Back): 241.2 mm / 9.5 inches (DELTA-AXF12), 281.4 mm / 11.08 inches (DELTA-AXF15)
• Unpacked dimensions – Depth: 373 mm / 14.69 inches (DELTA-AXF12), 406 mm / 15.98 inches (DELTA-AXF15)
• Packed Dimensions – Height: 745 mm / 29.3 inches (DELTA-AXF12), 803 mm / 31.6 inches (DELTA-AXF15)
• Packed Dimensions – Width (Front): 566 mm / 22.3 inches (DELTA-AXF12), 638 mm / 25.1 inches (DELTA-AXF15)
• Packed Dimensions – Width (Back): 328 mm / 12.9 inches (DELTA-AXF12), 366 mm / 14.4 inches (DELTA-AXF15)
• Packed Dimensions – Depth: 464 mm / 18.3 inches (DELTA-AXF12), 498 mm / 19.6 inches (DELTA-AXF15)
• Net Weight: 26.5 kg / 58.3 lbs (DELTA-AXF12), 30.5 kg / 67.1 lbs (DELTA-AXF15)
• Gross Weight: 30.0 kg / 66.0 lbs (DELTA-AXF12), 35.4 kg / 77.9 lbs (DELTA-AXF15)

Product Usage Instructions

1. Connect the power supply to the AC power source (AC100-120 V~/220-240 V~,50/60 Hz).
2. Ensure the power switch is in the “Off” position before connecting any audio sources.
3. For input A and input B, adjust the volume using the corresponding knobs.
4. If using a stereo signal, connect the RCA L/R (Left and Right) input connectors to the appropriate audio source.
5. If using a balanced microphone or line-level input, connect an XLR or 1/4″ combo jack to the corresponding input.
6. For balanced loop/mix output, use the balanced male XLR connector.
7. Adjust the impedance balanced loop gain according to your setup requirements.
8. Mount the speakers using the M10 x 6 rigging hardware or place them on a 35 mm pole socket.
9. The speakers can be angled at 0 or 10 degrees for optimal sound projection.
10. Ensure the speakers are securely mounted or placed on a stable surface.
11. When turning on the speakers, the power indicator should turn green.
12. If any protection features are triggered (thermal protection, low line voltage shut down, driver protection, DC and short protection), the amplifier will shut down automatically and reset once the issue is resolved.

Note:
Please refer to the full user manual available for download from www.wharfedalepro.com for more detailed instructions and safety information.

SPECIFICATIONS

Low Frequency Transducer –

Size ( mm / inches)

| 332 mm / 12″| 404 mm / 15″
Coil Size ( mm / inches)| 75 mm / 3″| 75 mm / 3″
Impedance| 4 Ω| 4 Ω
High Frequency Transducer – Type| Compression Driver| Compression Driver
Coil Size ( mm / inches)| 51.2 mm / 2″| 51.2 mm / 2″
Exit Size ( mm / inches)| 35.6 mm / 1.4″| 25 mm / 1”
Diaphragm Material| Titanium| Titanium
Impedance| 8 Ω| 8 Ω
Nominal Coverage (H x V)| 90° x 45°| 90° x 45°
Ampli fi ers|  |
Amplifier Design| Class D| Class D

Power Rating:

| 1600 W Peak (1400 W LF +

200 W HF), 800 W Continuous (700 W LF + 100 W HF)

| 1600 W Peak (1400 W LF +

200 W HF), 800 W Continuous (700 W LF + 100 W HF)

Power On Protection| Power Switch On/Off Mute| Power Switch On/Off Mute
Thermal Protection| Amplifier Shut Down. Auto Reset| Amplifier Shut Down. Auto Reset
Low Line Voltage Shut Down| 80% Nominal Line Voltage| 80% Nominal Line Voltage
Driver Protection| Independent LF and HF Limiters| Independent LF and HF Limiters
DC and Short Protection| Yes| Yes
Clip Limiter| Turns on Approx 600 W Output| Turns on Approx 650 W Output
Limiter Indicator| Red LED| Red LED
Power Indicator| Green LED| Green LED
Connectors|  |
Input A – type| Switchable Balanced Mic or Line Level Input| Switchable Balanced Mic or Line Level Input
Input Sensitivity| Mic:-40 dBu Line:0 dBu| Mic:-40 dBu Line:0 dBu
Maximum Input Level| 22 dBu| 22 dBu
Input Connector| XLR 1/4〞Combo jack / 2 x RCA| XLR 1/4〞Combo jack / 2 x RCA
Input Impedance| Balanced:20 KΩ Unbalanced:10 KΩ| Balanced:20 KΩ Unbalanced:10 KΩ
Line Output Connector| Switchable LOOP/MIX Balanced Male XLR

Connector

| Switchable LOOP/MIX Balanced Male XLR

Connector

Impedance Balanced| Balanced: 200 Ω Unbalanced:100 Ω| Balanced: 200 Ω Unbalanced:100 Ω
Loop Gain| Mic:69 dB, Line:29 dB| Mic:69 dB, Line:29 dB
AC Power details – Power Supply| High Efficiency Switching Mode Power Supply| High Efficiency Switching Mode Power Supply
AC Power Options| AC100-120 V~/220-240 V~,50/60 Hz| AC100-120 V~/220-240 V~,50/60 Hz
Hardware – Rigging| M10 x 6| M10 x 6
Pole Mount| Dual Angle (0⁰ or 10⁰) 35 mm Pole Socket| Dual Angle (0⁰ or 10⁰) 35 mm Pole Socket
Enclosure Material and finish| 15 mm Plywood| 15 mm Plywood
Colour Options| Black Rhino Paint| Black Rhino Paint
Grille Material & Finish| 1.5 Steel| 1.5 Steel
Unpacked dimensions – Height| 640 mm / 25.2″| 700 mm / 27.56″
Width (Front)| 390 mm / 15.35″| 446 mm / 17.56″
Width (Back)| 241.2 mm / 9.5″| 281.4 mm / 11.08″
Depth| 373 mm / 14.69″| 406 mm / 15.98″
Packed Dimensions – Height| 745 mm / 29.3”| 803 mm / 31.6”
Width (Front)| 566 mm / 22.3”| 638 mm / 25.1”
Width (Back)| 328 mm / 12.9”| 366 mm / 14.4”
Depth| 464 mm / 18.3”| 498 mm / 19.6”
Net Weight (kg/lbs)| 26.5 kg / 58.3 lbs| 30.5 kg / 67.1 lbs
Gross Weight (kg/lbs)| 30.0 kg / 66.0 lbs| 35.4 kg / 77.9 lbs

REAR PANEL FEATURES

1. Volume for input A and input B: These knobs control the level of each input channel.
2. RCA L/R (Left and Right) input connectors: These connectors allow the input of a stereo signal (left and right). The signal is actively combined or “summed” providing a mono signal to the amplifier.
3. GAIN selection switch: This switch selects the proper gain structure for INPUT A. If a microphone is connected to INPUT A, use mic mode (up). If the signal source is anything other than a microphone (playback device, keyboard or mixer output, for instance) use the line mode (down).
4. XLR 1/4″ COMBO input jacks for INPUT A and INPUT B: These convenient jacks allow XLR or 1/4″ balanced input connections to INPUT A and INPUT B.
5. HI and LOW EQ (equalization) controls: These knobs control the equalization of the overall output signal providing+/-10 dB of gain for each band.
6. Remote control: This Phoenix connector can be used to control the volume with an applied voltage.
7. 90 Hz Monitor filter switch: Used to reduce bass buildup due to half-space loading.
8. Front LED defeat switch: Switches off the front power LED for discrete applications.
9. POWER ON / OFF switch, POWER ‘ON’ indicator LED, and LIMIT indicator LED: The switch: Turns the power on and off. The green LED to the left of the POWER switch illuminates when the power switch is in the ‘ON’ position. The red LED illuminates when the signal limiter is limiting the level of the signal to prevent distortion and overload.
10. Output source “LOOP/MIX” switch: In the “LOOP” mode, this switch routes the signal of INPUT A and B to the line level XLR OUTPUT jack, bypassing the EQ section and volume control. When in the MIX mode, this switch routes the combined (or “mixed”) signals of both INPUT A and INPUT B to the line level XLR OUTPUT jack.
11. POWER cord receptacle: This is a receptacle for a standard IEC, three-prong, grounded AC electrical connection cord. Be sure that you are plugging into the correct source voltage that matches what is indicated just below the power cord receptacle.
12. XLR line level OUTPUT connector: This connector provides a balanced line level output for connection to additional Delta Active, powered subwoofers or amplifier.

WHARFEDALE PRO LIMITED WARRANTY

Wharfedale Pro products are warranted for manufacturing or material defects for a period of three years from the original date of purchase. In the event of a malfunction, contact your authorized Wharfedale Pro dealer or distributor for information. Please be aware that the warranty details may differ from country to country. Contact your dealer or distributor for information (available at www.wharfedalepro.com). These terms do not infringe on your statutory rights.

WHARFEDALE PROFESSIONAL
IAG House, 13/14 Glebe Road, Huntingdon, Cambridgeshire, PE29 7DL, UK
www.wharfedalepro.com.

Wharfedale Professional reserves the right to alter or improve specifications without notice. All rights reserved © 2022 Wharfedale Pro. Wharfedale Pro is a member of the IAG Group.

Your full user manual can also be downloaded from www.wharfedalepro.com.

References

• Wharfedale Pro – Wharfedale Pro

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>