SHARP 24EE2UM 24 Inch HD Ready Smart TV User Guide

SHARP 24EE2UM 24 Inch HD Ready Smart TV

For information on using the TV’s features, please refer to the Operating Instructions.

Quick & easy guide for setting up your TV

• What is included in the box
• Using the remote control
• Setting up the TV for the fi rst time – including attaching the stand
• Connecting other devices to the Television

Technical Specification

24EE2UM

Energy Efficiency Class (SDR)

|

E

Power consumption (SDR)

| 17 W
Screen resolution (pixels)|

1366 x 768

Screen Size (diagonal)

| 60 cm / 24 inches
RF|

75 ohm Antenna / Analog / DVB / Satellite

Inputs

| 3 x HDMI • 2 x USB • 1 x Micro SD card slot 1 x RJ45 LAN/Ethernet • 1 x Composite/CVBS Video 1 x L/R Audio input for Composite/CVBS
Sound Outputs|

1 x Digital Optical Audio output, 1 x 3.5mm Headphone

Speaker/Amplifier Watts (RMS)

| 2 x 5 / 2 x 3 W
Voltage and power consumption|

12V DC / 24V DC 17/40W (home mode/max) (

<0.5W in Standby)>Power Adapter

| In: 100~240V AC 50/60Hz • Out: 12V DC 4A
Dimensions including stand (mm)|

554W x 355H x 142D

Net weight (Kgs)

| 3.2
Wall Mounting|

VESA 100 x 100 (mm)

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

For DTS patents, see http://patents.dts. com. Manufactured under license from DTS, Inc. (for companies headquartered in the U.S./Japan/Taiwan) or under license from DTS Licensing Limited (for all other companies). DTS, DTS-HD Master Audio, DTS-HD, Virtual: X, and the DTS-HD logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2021 DTS, Inc. ALL RIGHTS RESERVED.

Online Manual

To launch the online manual, press the MENU button on the remote control, select About from the menu, and select Help Information.

What is included in the box

Accessories

Included with this TV are the following accessories

• 1 x Quick Start Guide

• 1 x Power adapter

• 1 x Remote Control & 2 x AAA Batteries

• 1 x 12V / 24V (Car/Caravan) Power adaptor

• 1 x Safety Leaflet

• 1 x Stand installation pack
  

• 1 x External antenna

Additional Accessories

Should you wish to connect older/analogue devices to your television, you can purchase the necessary cables either from your retailer or at www.umc- uk.co.uk/cables.

RF Cable
Required if you wish to connect to terrestrial services.

Microsoft PlayReady™

This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.

Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected  content and/or WMDRM- protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.

Freeview Play

Freeview Play brings together live TV viewing with ‘‘catch up’’ TV services such as BBC iPlayer , ITV player, More4 and My5.
The Freeview Play Explore app features a carousel of genres to select from when searching for programmes, such as sport, comedy, dramas and soaps, etc. Content is made up from recommendations of the major broadcasters and offers an alternative means of searching.

Note that to use the full functionality of Freeview Play your set must be connected to the internet.

Please save your box/packaging as you will need this in the event of warranty/service repair or support. We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to\ package your item in the event of warranty/service repair is in it’s original box/packaging.

REMOTE CONTROL

Key

For models with integrated DVD players
For models with USB Playback

1. STANDBY -Switch on the TV when in standby or vice versa.
   SOURCE – To display the input/source menu

2. NUMBER BUTTONS – 0-9 to select a TV channel directly.
   MUTE -Mute the sound or vice versa
   GUIDE -Opens the 7 day TV guide (digital TV mode)

3. MENU – Displays the OSD menu
   FAV – Displays the favorites menu
   INFO – Press once for now/next channel information.
   – Press twice for information about the current programme.
   – Allows you navigate the on-screen menus and adjust the system settings to your preference.
   BACK – To go back a previous step.
   APPS – Access the Apps menu
   EXIT   – To exit all menus.
   VOL (+/-) – Tilt to increase/decrease the sound level.
   CH (+/-) – Tilt to move up or down the channel being watched.

4. NETFLIX -Access the Netflix App.
   PRIME VIDEO – Access the Prime Video App.
   YOUTUBE – Access the YouTube App.
   FREEVIEW PLAY – Access the Freeview Play App
   AUDIO   – Scrolls through the sound mode options.
   SUB – To switch the dialogue at the bottom of the screen (on/off).
   TEXT – To enter/exit Teletext
   TV – To switch to digital Channels

COLOUR BUTTONS- Execute corresponding function at that time.

Sky Remote Code

If you wish to use your Sky remote to operate the TV’s basic functions, you will need a Sky remote control (Revision 9 or later) and you will need to program it with the code 2134. If you wish to use your Sky Q remote to operate the TV’s basic functions, you will need to program it with the code 4170.

Setting up the TV set for the first time

Fitting the stand

For stand feet installation, there is one type of screw provided as shown below.
To complete the stand installation you will require a cross head screw driver.
Place the TV set on a fl at and clean surface with the panel facing downwards to avoid damage.

4x Used for attaching the stand to the TV set (fig

1. Place the TV set on a flat and clean surface with the panel facing downwards to avoid damage, then fi x the stand feet shown. The feet are marked L (left) and R (right).
   

2. Secure the stand feet to the underside of the TV set using the 4 screws provided.
   

Connecting your set

For TV use at home: Use the optional RF cable, connect the TV to the TV Aerial wall socket. Connect power adaptor to the TV and plug into the mains supply.
For TV use in a car/caravan: Connect the external aerial cable to the TV. Connect the Car Adaptor to the TV, then connect it to the vehicle power socket.

Button layout

1. Volume up and menu right
2. Volume down and menu left
3. Programme/Channel up and menu up
4. Programme/Channel down and menu down
5. Displays Menu/OSD
6. Displays the input source menu
7. Standby Power On/Off

Remote Control: Installing Batteries

Insert the batteries supplied into the remote control and press the standby button to power on the TV.

First time installation

1. When the set first turns on, it enters the First Time Installation mode. This can be restarted by restoring the set to default settings in the ‘About TV’ Menu. Select your preferred on-screen display language. This will change the language in which the menus and associated information is displayed in.

2. Select the correct country in which the set will be used in. This will enable the set to correctly install the functions applicable in the country of use.

3. This needs to be set to establish parentol controls.

4. Set the Time Zone in which the TV will reside. This may be dependent on the country you select in step 2.

5. You will need to agree to certain information collection for the TV set to operate as intended.

6. You can connect the TV to your broadband router or wireless network in order to take advantage of the Smart functions. If you connect the TV to your router using an Ethernet cable, the Wifi set up will be skipped.

7. If you have a Netflix account, it can be set up on the television here. Once set up and validated, the First Time Installation returns to the next step.

8. Home Mode: For normal use, by default it is set to a power saving mode which reduces the energy used by up to 25% (by reducing the power to the LED/LCD panel). This can be changed in the picture mode settings.
   Note: In home mode, the TV will switch off automatically after 4 hours in the event that no buttons are pressed on the TV or remote control.

9. Choose to install terrestrial channels via Digital or Analog signals.
   Note: Analog signals in the United Kingdom have been turned off. Only Digital signals are available.

Wall Mounting the TV

Image for illustration only.
For the dimensions of the VESA mounting, please refer to the Technical Specifications section of this document.

1. Remove the four screws that are supplied in the wall mounting holes.
2. The wall mount can now be easily attached to the mounting holes on the rear of the TV
3. Install the wall mounting bracket to the television as advised by the bracket manufacturer.

The picture shows the use of spacers, which are not applicable to all sets/installations.

Connectivity

1. 12V / 24V DC IN 12V / 24V Power Adapter
2. Ethernet Network Connection
3. Digital Audio Digital Optical Audio Output
4. Video / L+R Composite/CVBS + audio Input
5. HDMI 3 HDMI Input
6. HDMI 2 HDMI Input
7. SAT In Satellite Input
8. RF In   RF / TV Aerial input
9. H DMI 1 (ARC) HDMI Input with ARC
10. USB 2.0 USB 2.0 input x2
11. Earphones Earphones Input
12. Service Input Input is used only by service centres
13. TF Card In Micro SD Card Input
14. CI Card In Common Interface Module

Customer Support

WIN SHARP Soundbar

Register your manufacturers guarantee online within 14 days of purchase at www.registertoday.co.uk/sharp and enter into a prize draw to win a Sharp Soundbar. Terms and conditions apply. Online registration only.

Need help setting up or using your TV?
**Please contact the UK & ROI Helpline***

*Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your phone provider. Hours are correct at time of this document being published.
Please note these hours are subject to change periodically.
Calls to the ROI number are charged at the local call rate.

The telephone opening hours are:
Monday to Friday: 8.30am – 6pm
Saturday: 9am – 5pm
Bank Holidays: 10am – 4pm
Closed Christmas and New Years day.
Telephone UK 0330 024 0803 or ROI 01443 3323
Online support at : www.umc-uk.co.uk
Email support at: service.gb@sharpconsumer.eu

References

• registertoday.co.uk
• UMC - Product Support, Sharp, Blaupunkt, Technika, e-motion, Eternity, JMB and Bush
• UMC UK LTD | Warranty & Technical Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>