AOC CQ27G3SU 27 Inch QHD Curved Monitor User Manual

AOC CQ27G3SU 27 Inch QHD Curved Monitor

Safety

National Conventions

The following subsections describe the notational conventions used in this document.

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or italic type. These blocks are notes, cautions, and warnings, and they are used as follows:

NOTE: A NOTE indicates important information that helps you make better use of your computer system.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.

WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by a regulatory authority.

Power

****The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

****The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.

****Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to power surges.

****Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

****To ensure satisfactory operation, use the monitor only with UL-listed computers which have appropriate configured receptacles marked between 100-240V AC, Min. 5A.

****The wall socket shall be installed near the equipment and shall be easily accessible.

Installation

****Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.

****Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or electric shock. Never spill liquids on the monitor.

****Do not place the front of the product on the floor.

****If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.

****Leave some space around the monitor as shown below. Otherwise, air circulation may be inadequate hence overheating may cause a fire or damage to the monitor.

****To avoid potential damage, for example, the panel peeling from the bezel, ensure that the monitor does not tilt downward by more than -5 degrees. If the -5 degree downward tilt angle maximum is exceeded, the monitor damage will not be covered under warranty.

See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the stand:

Installed with stand

Cleaning

****Clean the cabinet regularly with a cloth. You can use soft detergent to wipe out the stain, instead of strong detergent which will cauterize the product cabinet.

****When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.

****Please disconnect the power cord before cleaning the product.

Other

****If the product is emitting a strange smell, sound, or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center.

****Make sure that the ventilating openings are not blocked by a table or curtain.

****Do not engage the LCD monitor in severe vibration or high-impact conditions during operation.

****Do not knock or drop the monitor during operation or transportation.

Setup

Contents in Box

Not all signal cables will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.

Setup Stand & Base

Please set up or remove the base by following the steps below.

Setup:

Remove:

Adjusting Viewing Angle

For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference.
Hold the stand so you will not topple the monitor when you change the monitor’s angle.

You are able to adjust the monitor as below:

NOTE:

Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

Warning:

1. To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees.
2. Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.

Connecting the Monitor

Cable Connections In Back of Monitor and Computer:

1. Power
2. DP
3. HDMI-1
4. HDMI-2
5. USB-PC(USB upstream)
6. USB3.2 Gen1
7. USB3.2 Gen1+charging
8. Earphone
9. USB3.2 Gen1
10. USB3.2 Gen1

Connect to PC

1. Connect the power cord to the back of the display firmly.
2. Turn off your computer and unplug its power cable.
3. Connect the display signal cable to the video connector on the back of your computer.
4. Plug the power cord of your computer and your display into a nearby outlet.
5. Turn on your computer and display.

If your monitor displays an image, installation is complete. If it does not display an image, please refer to Troubleshooting. To protect equipment, always turn off the PC and LCD monitor before connecting.

Wall Mounting

Preparing to Install An Optional Wall Mounting Arm.

This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure.

Follow these steps:

1. Remove the base.
2. Follow the manufacturer’s instructions to assemble the wall mounting arm.
3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the monitor.
4. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions on attaching it to the wall.

Noted: VESA mounting screw holes are not available for all models, please check with the dealer or official department of AOC.

Display design may differ from those illustrated.

Warning:

1. To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees.
2. Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.

Adaptive-Sync function

1. Adaptive-Sync function is working with DP/HDMI
2. Compatible Graphics Card: Recommend list is as below, also could be checked by visiting www.AMD.com

• Radeon™ RX Vega series
• Radeon™ RX 500 series
• Radeon™ RX 400 series
• Radeon™ R9/R7 300 series （R9 370/X, R7 370/X, R7 265 except）
• Radeon™ Pro Duo (2016)
• Radeon™ R9 Nano series
• Radeon™ R9 Fury series
• Radeon™ R9/R7 200 series (R9 270/X, R9 280/X except)

Adjusting

Hotkeys

Power
Press the Power button to turn on the monitor.

Menu/Enter
When there is no OSD, Press to display the OSD or confirm the selection. Press about 2 seconds to turn off the monitor.

Game Mode/ <
When there is no OSD, press the”<” key to open the game mode function, then press the”<” or “>” key to select the game mode (FPS, RTS, Racing, Gamer 1, Gamer 2, or Gamer 3) basing on the different game types.

Dial Point/ >
When there is no OSD, press the Dial Point button to show/hide Dial Point.

Source/Exit

• When the OSD is closed, press Source/Exit button will be Source hot key function.
• When the OSD is closed, press the Source/Exit button continuously for about 2 seconds to auto-configure (Only for the models with D-Sub).

OSD Setting

Basic and simple instructions on the control keys.

1. Press the MENU button to activate the OSD window.
2. Press < or > to navigate through the functions. Once the desired function is highlighted, press the MENU button to activate it, and press < or > to navigate through the sub-menu functions. Once the desired function is highlighted, press the MENU button to activate it.
3. Press < or > to change the settings of the selected function. Press the AUTO–button to exit. If you want to adjust any other function, repeat steps 2-3.
4. OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press the power button to turn the monitor on. To un-lock the OSD – press and hold the MENU button while the monitor is off and then press the power button to turn the monitor on.

Notes:

1. If the product has only one signal input, the item of “Input Select” is disabled to adjust.
2. DCR, Color Boost, and Picture Boost, for these states that only one state can exist

Luminance

Note:

When HDR is detected, the HDR option is displayed for adjustment; when HDR is not detected, the HDR Mode option is displayed for adjustment.

Color Setup

|

Color Temp.

| Warm| | Recall Warm Color Temperature from EEPROM.
---|---|---|---|---
Normal| | Recall Normal Color Temperature from EEPROM.
Cool| | Recall Cool Color Temperature from EEPROM.
sRGB| | Recall SRGB Color Temperature from EEPROM.

User

| Red| Red Gain from Digital-register
Green| Green Gain Digital-register.
Blue| Blue Gain from Digital-register

DCB Mode

| Full Enhance| on or off| Disable or Enable Full Enhance Mode
Nature Skin| on or off| Disable or Enable Nature Skin Mode
Green Field| on or off| Disable or Enable Green Field Mode
Sky-blue| on or off| Disable or Enable Sky-blue Mode
Auto Detect| on or off| Disable or Enable AutoDetect Mode
OFF| on or off| Disable or Enable DCB Mode
DCB Demo| | on or off| Disable or Enable Demo
Red| | 0-100| Red gain from Digital-register.
Green| | 0-100| Green gain from Digital-register.
Blue| | 0-100| Blue gain from Digital-register.

Note:

When the “HDR   Mode” under “Brightness” is set to a non-off state, all items under “Color Settings” cannot be adjusted.

Picture Boost

| Bright Frame| on or off| Disable or Enable Bright Frame
---|---|---|---
Frame Size| 14-100| Adjust Frame Size
Brightness| 0-100| Adjust Frame Brightness
Contrast| 0-100| Adjust Frame Contrast
H. position| 0-100| Adjust Frame horizontal Position
V. position| 0-100| Adjust Frame Vertical Position

Note:

When the “HDR   Mode” under “Brightness” is set to a non-off state, all items under “Window Brightness” cannot be adjusted.

OSD Setup

| Language| | Select the OSD language
---|---|---|---
Timeout| 5-120| Adjust the OSD Timeout
DP Capability| 1.1/1.2/1.4| Please be noted that only DP1.2/1.4 support Adaptive-

Sync function

H. Position| 0-100| Adjust the horizontal position of OSD
V. Position| 0-100| Adjust the vertical position of OSD
Volume| 0-100| Volume Adjustment.
Transparence| 0-100| Adjust the transparence of OSD
Break Reminder| on or off| Break reminder if the user continuously work for more

than 1hrs

Note:

If the DP video content supports DP1.2/DP1.4, please select DP1.2/DP1.4 for DP Capability; otherwise, please select DP1.1

Game Setting

|

Game Mode

| FPS| For playing FPS (first Person Shooters) games.

Improves dark theme black level details.

---|---|---|---
RTS| For playing RTS (Real Time Strategy). Improves the

image quality.

Racing| For playing Racing games, Provides fastest response

time and high color saturation.

Gamer 1| User’s preference settings saved as Gamer 1.
Gamer 2| User’s preference settings saved as Gamer 2.
Gamer 3| User’s preference settings saved as Gamer 3.
off| No optimization by Smart image game

Shadow Control

|

0-100

| Shadow Control Default is 50, then end-user can adjust

from 50 to 100 or 0 to increase contrast for clear picture.

1.        If picture is too dark to be saw the detail clearly, adjust from 50 to100 for clear picture.

2.        If a picture is too white to be saw the detail clearly,

adjusting from 50 to0 for clear picture

Low Input Lag| On/Off| Turn off frame buffer to decrease input lag
Game Color| 0-20| Game Color will provide 0-20 level for adjusting

saturation to get better picture.

LowBlue Mode

| Reading / Office

/ Internet / Multimedia / Off

| Decrease blue light wave by controlling color temperature.

Overdrive

| Weak|

Adjust the response time.

Medium
Strong
Boost
Off
Adaptive-Sync| On/Off| Adjust the Adaptive-Sync.

Frame Counter

| Off / Right-up /

Right-Down / Left- Down / Left-Up

|

Display V frequency on the corner selected

MBR| 0 ~ 20| Adjust the Motion Blur Reduction.

Note:

The function MBR and Overdrive Boost are available only when Adaptive-Sync is off and the vertical frequency is up to 75 Hz.

Extra

| Input Select| | Select Input Signal Source
---|---|---|---
Off timer| 0-24hrs| Select DC off time

Image Ratio

| Wide|

Select image ratio for display.

4:3
1:1
17” (4:3)
19” (4:3)
19” (5:4)
19”W (16:10)
21.5”W (16:9)
22”W (16:10)
23”W (16:9)
23.6”W (16:9)
24”W (16:9)
DDC/CI| yes or no| Turn ON/OFF DDC/CI Support

Reset

| yes or no| Reset the menu to default.

(ENERGY STAR® available for selective models.)

ENERGY STAR® or no

Exit

| Exit| | Exit the main OSD
---|---|---|---

LED Indicator

Troubleshoot

Cord is properly connected to a grounded power outlet and to the monitor.

No images on the screen

| Is the power cord connected properly?

Check the power cord connection and power supply. Is the cable connected correctly?

(Connected using the VGA cable) Check the VGA cable connection. (Connected using the HDMI cable) Check the HDMI cable connection. (Connected using the DP cable) Check the DP cable connection.

• VGA/HDMI/DP input is not available on every model.

If the power is on, reboot the computer to see the initial screen (the login screen), which can be seen.

If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows 7/8/10) and then change the frequency of the video card.

(Refer to the Setting the Optimal Resolution)

If the initial screen (the login screen) does not appear, contact the Service Center or your dealer.

Can you see “Input Not Supported” on the screen?

You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly.

Adjust the maximum resolution and frequency that the monitor can handle properly.

Make sure the AOC Monitor Drivers are installed.

Picture Is Fuzzy & Has Ghosting Shadowing Problem

| Adjust the Contrast and Brightness Controls. Press to auto adjust.

Make sure you are not using an extension cable or switch box. We recommend plugging the monitor directly to the video card output connector

on the back.

Picture Bounces, Flickers Or Wave Pattern Appears In The Picture| Move electrical devices that may cause electrical interference as far away

from the monitor as possible.

Use the maximum refresh rate your monitor is capable of at the resolution you are using.

Monitor Is Stuck In Active Off-Mode”

| The Computer Power Switch should be in the ON position.

The Computer Video Card should be snugly fitted in its slot.

Make sure the monitor’s video cable is properly connected to the computer. Inspect the monitor’s video cable and make sure no pin is bent.

Make sure your computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either

turn ON or OFF after hitting the CAPS LOCK key.

Missing one of the primary colors (RED, GREEN, or BLUE)| Inspect the monitor’s video cable and make sure that no pin is damaged. Make sure the monitor’s video cable is properly connected to the computer.
The screen image is not centered or sized properly| Adjust H-Position and V-Position or press hot-key (AUTO).
The picture has color defects (white does not look white)| Adjust the RGB color or select desired color temperature.

Horizontal or vertical disturbances on the screen

| ****

Use Windows 7/8/10 shut-down mode to adjust CLOCK and FOCUS. Press to auto- adjust.

Specification

General Specification

Panel

| Model name| CQ27G3SU CQ27G3SU/BK
---|---|---
Driving system| TFT Color LCD
Viewable Image Size| 68.5 cm diagonal
Pixel pitch| 0.2331mm(H) x 0.2331mm(V)
Display Color| 16.7M Colors

Others

| Horizontal scan range| 30k-230kHz (HDMI)

30k-250kHz (DP)

Horizontal scan Size(Maximum)| 596.736mm
Vertical scan range| 48-144Hz (HDMI)

48-165Hz (DP)

Vertical Scan Size(Maximum)| 335.664mm
Optimal preset resolution| 2560×1440@60Hz
Max resolution| 2560×1440@144Hz (HDMI)

2560×1440@165Hz (DP)

Plug & Play| VESA DDC2B/CI
Power Source| 100-240V~, 50/60Hz, 1.5A

Power Consumption

| Typical(Default brightness and contrast)| 46W
Max. (brightness = 100, contrast =100)| ≤ 88W
Standby mode| ≤ 0.3W
Physical Characteristics| Connector Type| HDMI/DP/Earphone out/USB
Signal Cable Type| Detachable

Environmental

| Temperature| Operating| 0°~ 40°
Non-Operating| -25°~ 55°
Humidity| Operating| 10% ~ 85% (non-condensing)
Non-Operating| 5% ~ 93% (non-condensing)
Altitude| Operating| 0~ 5000 m (0~ 16404ft )
Non-Operating| 0~ 12192m (0~ 40000ft )

CQ27G3SU/BK

Preset Display Modes

STANDARD| RESOLUTION| HORIZONTAL

FREQUENCY(kHz)

| VERTICAL

FREQUENCY(Hz)

---|---|---|---

VGA

| 640×480@60Hz| 31.469| 59.94
640×480@72Hz| 37.861| 72.809
640×480@75Hz| 37.5| 75
640×480@100Hz| 50.313| 99.826
640×480@120Hz| 60.938| 119.72

SVGA

| 800×600@56Hz| 35.156| 56.25
800×600@60Hz| 37.879| 60.317
800×600@72Hz| 48.077| 72.188
800×600@75Hz| 46.875| 75
800×600@100Hz| 62.76| 99.778
800×600@120Hz| 76.302| 119.972

XGA

| 1024×768@60Hz| 48.363| 60.004
1024×768@70Hz| 56.476| 70.069
1024×768@75Hz| 60.023| 75.029
1024×768@100Hz| 80.448| 99.811
1024×768@120Hz| 97.551| 119.989

SXGA

| 1280×1024@60Hz| 63.981| 60.02
1280×1024@75Hz| 79.976| 75.025

WXGA+

| 1440×900@60Hz| 55.935| 59.887
1440×900@60Hz| 55.469| 59.901

WSXGA

| 1680×1050@60Hz| 65.29| 59.954
1680×1050@60Hz| 64.674| 59.883

FHD

| 1920×1080@60Hz| 67.5| 60
1920×1080@120Hz| 139.1| 119.93

QHD

| 2560×1440@60Hz| 88.787| 59.951
2560×1440@120Hz| 182.997| 119.998
2560×1440@144Hz| 222.056| 143.912
2560×1440@165Hz(DP)| 242.55| 165
IBM MODES
DOS| 640×350@70Hz| 31.469| 70.087
DOS| 720×400@70Hz| 31.469| 70.087
MAC MODES
VGA| 640×480@67Hz| 35| 66.667
SVGA| 832×624@75Hz| 49.725| 74.551
XGA| 1024×768@75Hz| 60.241| 74.927

Pin Assignments

19-Pin Color Display Signal Cable

Pin No.| Signal Name| Pin No.| Signal Name| Pin No.| Signal Name
---|---|---|---|---|---
1.| TMDS Data 2+| 9.| TMDS Data 0-| 17.| DDC/CEC Ground
2.| TMDS Data 2 Shield| 10.| TMDS Clock +| 18.| +5V Power
3.| TMDS Data 2-| 11.| TMDS Clock Shield| 19.| Hot Plug Detect
4.| TMDS Data 1+| 12.| TMDS Clock-| |
5.| TMDS Data 1Shield| 13.| CEC| |
6.| TMDS Data 1-| 14.| Reserved (N.C. on device)| |
7.| TMDS Data 0+| 15.| SCL| |
8.| TMDS Data 0 Shield| 16.| SDA| |

20-Pin Color Display Signal Cable

Plug and Play

Plug & Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.

The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.

Download this PDF Link:AOC CQ27G3SU 27 Inch QHD Curved Monitor User Manual

FAQ’s

What is the screen size of the AOC CQ27G3SU monitor?

The AOC CQ27G3SU monitor has a 27-inch screen size.

What is the resolution of the monitor?

The monitor features a QHD (2560 x 1440) resolution.

Is the monitor curved?

Yes, the AOC CQ27G3SU is a curved monitor for an immersive viewing experience.

What is the refresh rate of the monitor?

The monitor has a high refresh rate of 165Hz, ideal for smooth gaming and video playback.

Does the monitor support AMD FreeSync technology?

Yes, the monitor supports AMD FreeSync Premium for tear-free and smooth gaming.

What is the panel type used in this monitor?

The AOC CQ27G3SU monitor uses a VA (Vertical Alignment) panel.

What is the response time of the monitor?

The monitor boasts a 1ms MPRT (Moving Picture Response Time) for reduced motion blur.

Does it have built-in speakers?

Yes, the monitor comes with built-in 2W stereo speakers.

How many input ports does it have?

The monitor offers multiple connectivity options, including DisplayPort 1.2, HDMI 2.0, and VGA inputs.

Is the stand height-adjustable?

Yes, the monitor stand is height-adjustable, allowing you to customize the viewing angle.

Does the monitor support VESA mounting?

Yes, the monitor is VESA mount compatible for easy wall mounting or use with different stands.

What is included in the box along with the monitor?

The package typically includes the AOC CQ27G3SU monitor, a stand, necessary cables (e.g., DisplayPort, power), and a user manual.

Reference:AOC CQ27G3SU 27 Inch QHD Curved Monitor -device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>