Baseus SXBC060102 Smooth Writing 2 Series Wireless Charging Multifunctional Stylus Portable Touch Screen Capacitive Pencil User Manual
- June 12, 2024
- Baseus
Table of Contents
Baseus SXBC060102 Smooth Writing 2 Series Wireless Charging
Multifunctional Stylus Portable Touch Screen Capacitive Pencil
Parts Description
Customization Functions of Up/Down Button:
- HOME Previous Page
- ON/OFF Mute
- Brightness+ Search
- Brightness- Photograph
- Recently Used Apps Ouick Screenshot
- Volume + Edit Screenshot
- Volume – Blank (No shortcut functions)
- Next Page
Product Specifications
- Name: Baseus Smooth Writing 2 Series Wireless Charging
- Multifunctional Stylus (Active Wireless Version)
- Model No.: BS-PS026
- Material: Aluminum alloy barrel, plastic POM nib
- Pairing Name: Baseus-PS026
- Charging Connector: Magnetic charging
- Battery Capacity: 125mAh
- Accessories: Replaceable tip X1, user manual × 1
Compatible model
Indicator
Use Instructions
Bluetooth Connection:
- Press and hold the power button to turn on the stylus, indicator flashes blue, entering pairing mode;
- Go to “Settings” on your iPad, click Bluetooth and select “Baseus-PS026” to pair;
- “Connected” prompts up, and indicator goes out, meaning the pairing is successful, you can check the battery level of the stylus in your iPad.
APP Connection:
- Download the Baseus APP in App Store;
- Turn on the stylus and connect to the Bluetooth of your iPad;
- Add the stylus in the Baseus App, it’s under the Lifestyle & Office catalogue;
- Make sure the stylus is not connected to other device and the remaining battery is sufficient during the connection process.
Note: If the connection fails, please restart the stylus and try again.
Customization Function Setup:
Open the Baseus APP, after you add the stylus to the app, go to the stylus
page, select “Double-press Setup” and “One-press Setup” to customize the
shortcut functions.
Note: Default setup as follows, connect to the Bluetooth of the device to use the shortcut functions.
Use without Connecting to Bluetooth:
Press and hold the power button to turn on the stylus, after 3min of flashing,
the indicator stays on, and then you can use the stylus.
Power off:
Press and hold the power button to turn off the stylus.
Note: The stylus will automatically turn itself off after 5 minutes of no
operation.
Use **
**
- You can use the stylus instead of your fingers to tap, drag on the screen. Or use it to write, draw in some apps. ****
- Full-screen palm rejection allows you to place your hand on the screen during writing, and you can adjust the thickness of the stroke by tilting the pen tip.
- Press/double-press the Up/Down button to use the shortcut functions.
Battery Charging
You can charge the stylus via the following methods:
- Snap it onto your iPad for magnetic wireless charging.
- Use a compatible charging case to charge the stylus.
Declaration on hazardous substances and elements contained in electronic products
This form is compiled in accordance with SJ/T 11364.
O: It indicates that the content of the harmful substance in all
homogeneous materials of the component is below the limit specified in GB/T
26572 standard.
X: The content of harmful substances in at least one homogeneous material
of this part exceeds the limit stipulated in GB/T 26572 standard.
Warm Tip: The 5-year icon refers to the “effective life of environmental
protection”, not the product quality assurance period. Electronic products al
contain harmful substances such as lead, mercury and cadmium. Once they are
overused, harmful substances may leak or mutate, cause pollution to the
environment, or cause serious damage to people and property. The term of
“environmental protection use” means that all electronic products will be
required to use within this effective period. We will no longer be responsible
for the quality of the products due to the safety risks that arise after the
safe use period.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
It is hereby declared that BS-PS026, a product model of Shenzhen Baseus Technology Co., Ltd., complies with the provisions of Directive 2014/53/EU, Directive 2011/65/EU. The full text of the EC Declaration of Conformity can be found on the following website: www.baseus.com
This equipment complies with the provisions of Directive 2012/19/EU, 2006/66/EU. It is strictly forbidden to dispose of this equipment with ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: GB 4943.1
Hotline: 400-071-2711 (China) / +1 800 220 8056(Global)
Website: https://www.baseus.cn (China) / https://www.baseus.com (Global)
Official After-sales E-mail Address:
service@baseus.com (China) /
care@baseus.com (Global)
Designed by Baseus
Made in China
PB4417Z-POAO
1100005721