INVACARE Aquatec Step Stepping Aid User Manual

: June 12, 2024
: INVACARE

Table of Contents

INVACARE Aquatec Step Stepping Aid
General
Safety
Product Overview
Setup
Maintenance
After Use
Technical Data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

INVACARE Aquatec Step Stepping Aid

General

Introduction
This user manual contains important information about the handling of the product. To ensure safety when using the product, read the user manual carefully and follow the safety instructions. If you find that the font size in the printed document is difficult to read, you can download the PDF version from the website. Invacare reserves the right to alter product specifications without further notice. In case of a serious incident with the product, you should inform the manufacturer and the competent authority in your country.

Warranty Information
We provide a manufacturer’s warranty for the product in accordance with our General Terms and Conditions of Business in the respective countries. Warranty claims can only be made through the provider from whom the product was obtained.

Compliance
This CE- and UKCA-marked medical device conforms to: EU Medical Device Regulation, UK Medical Device Regulation, ISO 13485, ISO 14971, REACH, EN 12182 and related standards.

Service life
The expected service life of this product is three years when used in accordance with safety instructions and intended use, stated in this manual. The effective service life can vary according to frequency and intensity of use.

Limitation of Liability
Invacare accepts no liability for damage arising from:

Non-compliance with the user manual
Incorrect use
Natural wear and tear
Incorrect assembly or set-up
Unauthorized modifications and/or use of unsuitable spare parts

Safety

Safety Information

WARNING! Risk of Serious Injury or Damage

Improper use of this product may cause injury or damage.

If you are unable to understand the warnings, cautions or instructions, contact a healthcare professional or provider before attempting to use this equipment.
Do not use this product or any available optional equipment without first completely reading and understanding these instructions and any additional instructional material.

WARNING! Risk of Falling!

Before every use, check the product for damage and ensure that it is securely assembled.
Do not use if defective.
Do not make any unauthorized alterations or modifications to the product.
Do not move or displace the product under load or during use.
Only use the product on level ground.
Only use accessories and options intended for this product.

Labels and Symbols on the Product

A	Manufacturer	G	Production date
B	UK Conformity Assessed	H	Unique Device Identifier
C	European Conformity	I	Medical Device
D	Lot number	J	Reference number
E	Read user manual	K	Product designation
F	Maximum user weight

The identification label is attached to the underside of the product.

Product Overview

Intended use
This stepping aid is intended as an aid to enter into or get out of a bathtub for persons with mobility limitations. Indication: If used without an assistant, the users must be able to keep their own balance. There are no contraindications known when using the product as intended. For the maximum user weight, see 7 Technical Data, page 3 .

Scope of Delivery
The scope of delivery is shown in Figure 1.

Setup

For removing or installing the non-slip cover A, refer to figure 2.

WARNING! Risk of Slipping

Make sure that all 10 fastening buttons B are securely fastened before using the product.

Maintenance

General Maintenance Information
This product is maintenance-free, provided that the cleaning and disinfection instructions are adhered to.

Cleaning and Disinfection General Safety Information

CAUTION! Risk of Contamination

Take precautions for yourself and use appropriate protective equipment.

NOTICE!
Wrong fluids or methods can harm or damage the product.

All cleaning agents and disinfectants used must be effective, compatible with one another and must protect the materials they are used to clean.
Never use corrosive fluids (alkalines, acid etc.) or abrasive cleaning agents. We recommend an ordinary household cleaning agent such as dishwashing liquid.
Never use a solvent (cellulose thinner, acetone etc.) that changes the structure of the plastic or dissolves the attached labels.

For cleaning and disinfection in clinical or long-term care environments, follow your in-house procedures.

Cleaning Intervals

NOTICE!
Regular cleaning and disinfection enhance smooth operation, increase the service life and prevent contamination.

Clean and disinfect the product:

before first use,
regularly while it is in use,
when it has been in contact with any body fluids.

Cleaning

Remove detachable parts.
Clean all parts by wiping down all generally accessible surfaces.
Machine-wash the cover at max. 60 °C.
Dry the parts with a cloth.

Disinfection Instructions

Method: Follow the application notes for the used disinfectant and wipe-disinfect all accessible surfaces.
Disinfectant: Ordinary household disinfectant.
Drying: Allow the product to air-dry.

After Use

Reconditioning
This product is suitable for reuse. To recondition the product for a new user, carry out the following actions:

Inspection
Cleaning and disinfection

For detailed information, see 5 Maintenance, page 2 . Make sure that the user manual is handed over with the product.

Disposal
Disassemble the product and its components, so the different materials can be separated and recycled individually. The disposal and recycling of used products and packaging must comply with the laws and regulations for waste handling in each country. Contact your local waste management company for information.

Technical Data

Weights

Product weight: 1.5 kg
Max. user weight: 150 kg

All product components do not contain natural rubber latex.

Environmental Parameters

Operating Conditions

Ambient temperature| 10 – 40 °C
Relative humidity| 15% – 93%, non-condensing
Storage and Shipping Conditions
Ambient temperature| 0 – 40 °C
Relative humidity| 30% – 75%, non-condensing

United Kingdom & Ireland: