Skullcandy Smokin’ Buds Bluetooth Earbuds with Microphone User Guide
- June 12, 2024
- Skullcandy
Table of Contents
Smokin’ Buds Bluetooth Earbuds with Microphone
User Guide
Smokin’ Buds Bluetooth Earbuds with Microphone
Scan to get started.
Warranty information at:
skullcandy.com/warranty
Auto Power – On/Off
Auto On – Remove buds from Case
Auto Off – Place buds into Case
Power – On/Off
Power – On
*Off Mode
Either bud
Power – On
Power – Off
*On Mode
Both earbuds
Power – Off
Pairrg Mode
*On Mode
Either bud
Pairrg Mode
Pair New Device
Voice Prompt – “Ready to Pair”
Available Device – “Smokin’ Buds”
Pair New Device
Play/Pause Answer/End
*While On
Either bud
Play/Pause-Answer/End
Volume Up
Either Earbud
Volume Up
Volume Down
Either Earbud
Volume Down
EQ Mode Change
Either Earbud
Change Equalizer Modes
Charge Earbuds
Earbud LED’s turn RED to indicate charging.
Charge Earbuds
Charge the Case
Charge Case
Re-Sync Earbuds
Both Earbuds
While On
Bluetooth Disconnected
Re-sync earbuds
Reset Paired Device List
Both earbuds
While ON
Bluetooth Disconnected
Reset Device
Questions Visit: www.skullcandy.com
Maximum operating temperature 45°C.
Speaker Driver: 6mm.
Impedance: 16 Ohms, THD <3%@50KHz-10KHz.
Voltage Regulation: 3.7v,
Bluetooth®: 5.2,
Frequency Band: 2.402GHz – 2.480GHz,
Maximum Power: 2dBm,
Weight: 40.59g.
, and other merits are registered trademarks d Skullcandy. Inc. All
rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>