t akustik Pet Pendant Absorber Instruction Manual
- June 12, 2024
- t akustik
Table of Contents
takustik Pet Pendant Absorber
Product Information
The product is a PET Pendant Absorber available in three sizes: PET Pendant Absorber 30, PET Pendant Absorber 40, and PET Pendant Absorber 50. It is designed to optimize room acoustics by absorbing sound waves.
Product Usage Instructions
- Before installation, examine the condition and load carrying capacity of the ceiling to ensure it can support the absorber.
- Tools required for installation include a level, folding ruler, drilling machine, drill bits, and a pencil.
- Unbox the package carefully, avoiding the use of sharp objects that can damage the absorber.
- Remove the products from the packaging and read the mounting instructions carefully. Take out the mounting accessories and the absorber.
- Measure the distances of the dowels inserted in the side of the absorber and mark these distances on the ceiling for drilling holes.
- Using a drilling machine, drill holes at the marked positions on the ceiling.
- Insert dowels into the drilled holes and fasten the holder to secure them.
- Fix the wire rope by inserting the two screw threads into the holder and tightening them. Ensure that the wire ropes are guided through the recess of the holder.
- Screw two eyelets into each of the dowels inserted in the side of the absorber.
- Insert the hooks of the adjustable wire ropes into the eyelets of the absorber.
- Adjust the height of the absorber as desired. Secure any excess wire rope using cable straps.
- The absorber is now ready for use to optimize room acoustics.
Important Notes
This product is intended for optimizing room acoustics. Using it for any
other purpose or under different operating conditions is considered improper
and may result in personal injury or property damage. The manufacturer does
not assume liability for damages resulting from improper use. Dispose of
plastic bags, packaging, etc. properly and ensure they are out of reach of
babies and young children to prevent choking hazards. The packaging materials
are environmentally friendly and can be recycled. Dispose of them accordingly,
following the instructions and markings on the packaging.
MOUNTING INSTRUCTIONS
ABSORBER
These instructions are for the following product: PET Pendant Absorber 30, PET
Pendant Absorber 40, PET Pendant Absorber 50
TIP:
Make sure to examine the condition and load carrying capacity of the ceiling
before installation.
TOOLS
The following tools are needed for installation:
- Level
- Drilling machine
- Pencil
- Folding ruler
- Drill bits
MOUNTING ACCESSORIES
The following mounting accessories are included for installation of the absorber:
- 4 × dowel
- 4 × screw M4×40
- 4 × eyelet
- 4 × adjustable wire rope
- 2 × PET fleece absorber
UNBOXING
Open the package carefully! Inserting sharp objects into the package can
damage the absorber. Avoid using long, sharp tools for opening the package!
REMOVE PRODUCTS FROM PACKAGING
Carefully remove the products from the package and read the mounting
instructions carefully. Remove the mounting accessories and the absorber.
DETERMINE THE POSITION
Measure the distances of the dowels inserted in the side of the absorber and
mark the measured distances for the drilling holes at the ceiling.
DRILL THE HOLES
Drill the holes at the markings using the drilling machine.
INSERT DOWELS + FASTEN HOLDER
- Insert the dowels into the drilled holes and fasten the holder of the wire ropes with two screws M4×40 to the ceiling.
- Make sure that the included screws are suitable for the condition of the ceiling.
FIX THE WIRE ROPE
Insert the two screw threads of the wire ropes in the holder and fasten the
screw threads. Make sure that the wire ropes are guided through the recess of
the holder.
FIX EYELETS
Screw two eyelets into each of the dowels inserted in the side of the
absorber.
FIX THE ABSORBER TO THE WIRE ROPES
Insert the hooks of the adjustable wire ropes into the eyelets of the
absorber.
ADJUSTING HEIGHT
Adjust the height of the absorber as you wish. Fix the excess wire rope using
cable straps.
USING ABSORBER
Now you can use the absorber.
- Find more solutions for your room on our website: www.takustik.com
- Share your installation with us on Instagram: www.takustik.com/instagram
- Find more installation guides on YouTube: www.takustik.com/youtube
This product is intended to be used to optimise the room acoustics. Any other use or use un-der other operating conditions is considered to be improper and may result in personal inju-ry or property damage. No liability will be assumed for damages resulting from improper use.
WARNING: Ensure that plastic bags, packaging, etc. are disposed of
properly and are not within reach of babies and young children. Choking
hazard!
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, pa-ckaging, etc. are properly disposed of. Do not just dispose of these
materials with your normal household waste, but make sure that they are
collected for recycling. Please follow the notes and markings on the
packaging.
Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany ·
www.thomann.de
DocID: 565454_565520565525…_15.05.2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>