SVEN RX-G805 Gaming Mouse User Manual

SVEN RX-G805 Gaming Mouse User Manual

Congratulations on your purchase of the Sven mouse!

COPYRIGHT
© SVEN PTE. LTD. Version 2.0 (16.05.2023).
This Manual and information contained in it are copyrighted. All rights reserved.
TRADEMARKS
All trademarks are the property of their legal holders.
NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted efforts to make this Manual more exact, some discrepancies may occur. The information in this Manual is given on “as is” terms. The author and the publisher do no bear any liability to a person or an organization for loss or damage which has arisen from the information contained in this Manual

BUYER RECOMMENDATIONS

• Shipping and transportation equipment is permitted only in the original container.
• Does not require special conditions for realization.
• Dispose of in accordance with regulations for the disposal of household and computer equipment.
• The date of manufacture of the product is indicated on the box.

APPOINTMENT

RX-G805 gaming mouse is an input device. It is designed for entering (entering) information into the computer, as well as controlling the operation of the computer.

PACKAGE CONTENTS

• Gaming mouse — 1 pc
• User Manual — 1 pc
• Warranty card — 1 pc

SYSTEM REQUIREMENTS

• ОS Windows.
• Free USB port

PREPARATION TO WORK

• ОS Windows.
• Free USB port. PREPARATION TO WORK
• Connect a controller to a free USB port on PC.
• Once it is connected to USB port, PC will automatically recognize a device.
• In order to configure buttons, it is necessary to install software that should be downloaded from an official website:
  
  

www.sven.fi/en/catalog/mouse/rx-g805.htm

• Launch the downloaded software, following the installer’s instructions.
  

• After installation the software will automatically determine presence of a mouse and install a driver. You can open control window by clicking an icon on Windows desktop.
  

• Key Button designations and mouse parameters.
  Initially, all mouse buttons are configured by default (see on a figure below). But a user can change functions of those keys. You can reassign the buttons by clicking on menu items — you will see a pop-up window, where you can reassign buttons, designate a macro (preconfigured options of key combinations) assign multimedia functions to a key (sound control, mute, player control).
  Attention! A field in front of number 1 can be reassigned only if you transfer a left mouse button function to any other button, otherwise a warning message will appear. All changes of mouse settings operate only with the software launched, if software is inactive, mouse settings will operate by default!

Changing mouse button functions
Mouse button functions can be changed by assigning other values to buttons. Mouse button numbering (image in the middle of a screen) corresponds to numbers in the list from 1 to 6. Clicking on menu items opens a pop-up window with additional functions that can be reassigned.

• Left click — left mouse button.
• Right click — right mouse button.
• Middle click — middle button under a scroll wheel.
• Forward — next page.
• Back — previous page.
• DPI Loop — switch DPI resolutions on a loop.
  

Additional functions
Additional functions improve user experience in different applications

Special key

• DPI Loop — switch DPI resolutions on a loop.
• DPI + — increase DPI.
• DPI – — decrease DPI.
• Fire key — a key to fire.
• AIM Key — a key to aim.
• Key Mode Switch — switch a key mode.
• LED Switch — switch a backlight.
• Disable   Keys — disable the keys.
  

Media

• Pause — pause.
• Stop — stop.
• Next Track — next track
• Previous Track — previous track
• Volume “+” — increase volume.
• Volume “-” — decrease volume.
• Mute — turn off the sound.
  

Internet

• Home — open home page of a default browser.
• Search — search bar.
• Web Back — previous page.
• Web Forward — next page
• Stop — stop.
• Refresh — refresh.
• Favorites — favorites.
  

Computer Function

• My Computer — open file explorer.
• Calculator — open a “Calculator” application.
• Desktop — go to desktop.
  

User-Defined
User-Defined mode allows to assign a combination of service keys to a mouse button

Base Macro
Base Macro allows to assign a saved macro to a mouse button

Advanced settings

Fire Key Setting
Fire Key — a button to fire. Fire Key setting has three options:

• Repeat — set a number of click repetitions from 1 to 255.
• Interval — set intervals from 1 to 255.
• Continuous — set a continuous mode.

Moving Speed Setting

Moving Speed — mouse cursor movement speed. “Moving Speed” setting allows to turn on or off an option “Enhance Pointer Precision”.
Enhance Pointer Precision — allows to increase or decrease pointer (cursor) precision. Movement speed can be changed by moving a slider. Double Click Speed Setting
Double click Speed — double click triggering speed. Triggering speed can be changed by moving a slider. Rolling Speed — wheel scrolling speed. “Rolling Speed” item allows to turn on or off an option “Scroll One Screen At A Time”. Rolling speed can be changed by moving a slider. In a right part of the screen there are settings of sensor resolution, DPI. By clicking a mouse on DPI 1, DPI 2, DPI 3, DPI 4, DPI 5, DPI 6 and moving a slider you can set four different sensor modes. By clicking a mouse on squares (at DPI names) you can turn on or off a setting for this DPI.

Macro tab

Creating macros
“Macro” tab allows to create precise sequences of pressing keys and buttons. This tab also allows to configure macros for different tasks. Assigning a macro to a key allows to easily perform complicated tasks. In order to create a macro command, follow the steps below:

• ith a right mouse button click on “New”, enter any name for a macro in a field and click“Ok”. Name of an entered macro will be shown in a window “Macro List”.
• Click “Record” and then sequentially press key combination that you want to use further on. The pressed buttons will be shown in a window “Macro Content”.

Keep in mind: Upon entering macros, the entered symbols will be in a language that is active at this moment. For instance, if macros are recorded in an English interface, symbols will be in English, and it will be impossible to switch input language from English to Russian and vice versa.

• In order to finish recording, click “Stop”, and then “Apply”. The program will save macro settings. If necessary, you can add additional commands to a list of macro commands already created. In order to do this, click “Insert” button and select a command you need from the list. Also there are options to set delay time, disable delay, set quantity of repetitions.
  

Saving, loading a macro

Macros can be saved in a file by clicking “Macro Import” button. “Macro Export” button loads a previously saved file. “Reset” button resets settings to default. “Apply” button saves software settings.

TECHNICAL SPECIFICATIONS

Notes. Technical specifications given in this table are supplemental information and cannot give occasion to claims. Technical specifications and package contents are subject to change without notice due to the improvement of SVEN production.

Symbols

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>