Bebe Stars 4220/4221 2 In 1 Fun Park Baby Walker User Manual
- June 12, 2024
- Bebe Stars
Table of Contents
Bebe Stars 4220/4221 2 In 1 Fun Park Baby Walker
PARTS LIST
- Seat
- Toy tray
- Height adjustment button
- Main frame
- Tilt adjustment
- Bumper
- Speed adjustment wheel
- Anti-slip pads
- Wheels
SAFETY GUIDE
Read the instructions carefully before use and save for future reference. The child may be injured if you do not follow these instructions.
- It is intended for children aged about 6 months and up who can sit on their own without assistance. Not intended for children who can walk or weigh more than 12kg.
- Do not place any load on the walker that could affect stability. The maximum load of the walker is 12kg.
- Warning: Avoid access to stairs, steps and non-flat surfaces.
- Warning: The child may move quickly and move away when using the walker.
- Avoid access to fireplaces, heaters and cookers.
- Avoid access to hot liquids, electrical cables and other potential hazards.
- Prevent collisions with glass doors, glass balcony doors and furniture.
- Do not move the walker while the baby is inside.
- Do not use the walker if any of its parts are broken or missing.
- Keep the plastic cover away from the baby, there is a risk of suffocation, etc.
- The walker should only be used for a short time (eg 20 ‘).
- When using a walker, the child should step on both feet.
- Adjust the height of the position appropriately to prevent falls or injuries.
- Do not use spare parts that are not approved by the manufacturer or distributor.
- Small pieces should only be assembled by adults.
WARNING!!!
Never leave your child unattended!
ASSEMBLY INSTRUCTIONS
- Insert the legs in the corresponding holes on the base and adjust the height with the (A) button. (Figure 1)
- Install the bumber when in walker mode. Remove when in pusher mode. (Figure 2)
- Clamp the seat on the corresponding holes on the main frame. (Figure 3)
- Install the toy bar on the main toy tray and place the tray on the main frame of the walker. (Figure4}
INSTRUCTIONS FOR USE
- Use the strap on the seat to adjust the height of the crotch. (Figure 1)
- Use the speed adjustment wheel to reduce or increase the speed of the walker. (Figure 2)
PUSHER MODE
- Figure A. Remove the bumper before converting to pusher mode.
- Figure B. First, push the tilt adjustment buttons (1) on both sides of the walker. After that,tilt the seat (2) as shown in the picture until it locks in place.
CARE & MAINTENANCE
- Please check on a regular basis that the latches, connecting elements, belt systems and seams are properly functional.
- Care for, clean and check this product regularly.
- Clean with a damp sponge or cloth and mild detergent.
- Do not use abrasives or bleach.
BATTERY INFORMATION
CAUTION
- Non-rechargeable batteries must not be recharged.
- Rechargeable batteries must be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Different type of batteries or new and used batteries must not be mixed.
- Only batteries of t he same type as recommended are to be used, alcaline AA 1.SV.
- Batteries must be inserted with the correct polarity.
- Exhausted batteries must be removed from the toy.
- Toy tray should be put onto the top tray when the baby stays in the walker.
- Batteries should be removed if the product is not going to be used in a short while Batteries not included:
Thank you for choosing Bebe Stars products.
FOLLOW US: www.bebestars.gr
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>