DIGITAL WATCHDOG DWC-P336WMW Wall Mount Bracket for White IP PTZ Cameras User Guide
- June 6, 2024
- DIGITAL WATCHDOG
Table of Contents
DIGITAL WATCHDOG DWC-P336WMW Wall Mount Bracket for White IP PTZ Cameras
User Guide
WHAT’S IN THE BOX
| 4x plastic anchors (8pi) | 4x nuts (M8) |
|---|---|
| 4x hex tapping screws (8×50) | 4x spring washers (M8) |
| 1x hex Allen wrench (2.5) | 1x quick setup guide |
| 1x PT plug tool |
NOTE: Download all your support materials and tools in one place
- Go to: http://www.digital-watchdog.com/resources
- Search your product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part numbers will populate automatically based on the part number you enter.
- Click ‘Search’. All supported materials, including manuals and quick start guide (QSGs) will appear in the results.
INSTALLING THE MOUNTING ACCESSORY
- Using the wall mount, mark and drill the mounting holes on the surface using the wall mount flange.
- Pull wires through to connect to the PTZ camera from the ceiling.
- Using the plastic anchors and screws*, mount and secure the wall mount bracket to the mounting surface.
- Open the access plate and pull out cables through the rectangular access hole.
- Attach the 1.5 -inch adapter to the ceiling mount bracket and fix it using the set screw.
- Attach the camera’s safety wire to the ceiling mount bracket and organize cables.
- Close the access plate of the mounting bracket.
- Push in and turn the camera clockwise into the adapter. Fix it using the set screw of the adapter.
Tel: +1 866-446-3595 /
813-888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>