WOLF 100400 PRO Headset User Manual
- June 12, 2024
- Wolf
Table of Contents
WOLF 100400 PRO Headset User Manual
Model number: 100400
Product description: Hearing protection with DAB+, FM, Bluetooth & Aux-in
Controls/buttons
- Antenna
- Tune – (Down/previous song)
- Tune + (Up/next song)
- LCD screen
- Menu (Menu/Info/Bluetooth)
- Enter/Bass (Confirm/Bass on and off)
- Aux in
- Mode (DAB+/FM/Aux-in/Bluetooth
- Volume and Power On/Off
- Battery cover
- LED indicator (The red LED lamp will be lit when the battery is charging)
- Microphone
- Charge port
- Battery chamber
- Power connector
- Battery status (shows battery percentage)
Battery installation
- Ensure that the On/Off Knob is switched off.
- Open the Battery Cover. Insert the tailor-made Lithium Battery into the Chamber and plug the battery cord into the Power Connector in the correct direction as shown in the figure to ensure that the power supply is connected. Close the battery cover.
- Battery 1st warning sound is heard when the battery power of the headset falls to 20%. Subsequent “DO” sound will be prompted in every 5th minute till the user re-charges the battery or all power is completely discharged.
- The manufacturer provides the tailor-made Lithium Battery. Other types of Lithium Batteries are not recommended.
DAB+ Operation
- Turn on the hearing protection by turning the Power On/Off Knob (which combines Volume Control) in clockwise direction and adjust the sound to your desired level.
- “Welcome to Digital Radio” is shown on the LCD screen. The headset is now set in DAB+ mode and will start the auto-scan to search DAB+ radio stations.
- During the scanning, “searching…” appears on the display. When a station is found, the DAB+ frequency, name and other messages are shown on the display. Press Tune – or Tune + to listen to the previous or next station.
- When you are listening to the radio station, press Menu to view the service provider’s information.
- To save your favorite stations, long-press Menu, then press Tune – or Tune +, the LCD screen will display “Save Preset”, then press the Enter key, the LCD screen will show “Preset Empty 1″ where 1 is flashing. Press Tune – or Tune + to select the sequence number that you want to save and then press ”Enter” to confirm the preset no. A total of 10 preset stations for DAB+ radio can be saved.
- To listen to the preset stations, long-press Menu. Then press Tune + or Tune -, to select, “Call Preset”, press Enter to confirm. Press Tune – or Tune + to choose your favorite stations and press “Enter” to confirm.
- Manual Tune – Long-press Menu “Auto Scan” will appear on the screen. Select “Manual Tune” by pressing Tune – or Tune +. The frequency will be visible on the display, press Tune – or Tune + to adjust to your desired frequency, auto scan will then be started to search all stations within your selected frequency. After it has scanned, a list of stations will appear on the display, and the hearing protection starts to play the 1st station automatically. To listen to the next station, press “Enter”, then press Tune – or Tune + to select the stations.
- Auto Scan – Long-press Menu, select Auto Scan and press Enter to confirm the setting. Auto-Tune full scan starts to receive the DAB+ signal, If no stations are found, “No Service” will appear on the display.
- Time update function: Time setting can be adjusted automatically synchronize the radio time and date in the DAB Mode.
Bluetooth Operation
- Turn on the Bluetooth function on your mobile phone or any other external Bluetooth devices.
- Search for ‘WOLF Headset PRO’ on your Bluetooth device, and pair them. When paired, “Bluetooth Connected” is shown on the LCD screen.
- Press Menu, to play/pause the music or answer a call. Tap Tune + or Tune – to forward/rewind the songs. To reject the call, long-press Tune – for 2 seconds.
- Re-dialing, long-press Tune + for 2 seconds, it will re-dial last call. When you receive a call through the Bluetooth function, it overrides the sound from FM/DAB+/AUX. Even pressing Mode activates nothing until the mobile call ends.
- After paired, the user still receives and answers a call while in Radio and Aux-in mode.
FM Operation
- Press the “Mode” Button to switch to FM. Press “Enter” to confirm the setting. Long-press Tune – or Tune + to start scanning. Stop scanning when clear signal is received.
- Manual search by short pressing Tune – or Tune +.
- To review the station information, press if RDS message is available from the service provider.
- To save and listen to your favorite stations, refer to the steps of DAB+ preset stations as mentioned above.
- Short press Enter key, Audio mode selected to Mono / Auto, it is only for FM mode.
Bass Boost
- To enhance the bass performance, press Enter, “Bass” is shown on the display. To deactivate the bass Boost function, press Enter again until “Bass” disappear from the screen.
Aux – in Jack
Press the “Mode” button to select AUX. Press “Enter” to confirm. To connect audio devices, plug a 3.5mm cable into the AUX port of the hearing protection. Plug the other end of the cable into the external audio device and start the playback.
Adjusting the fit
- Put on the earmuffs with the controls panel over your right ear.
- With the headband over the crown of your head, position the muffs to completely enclose your ears. The muffs only provide hearing protection when worn with the headband over the crown of your head.
- Slide the muffs carefully up or down to adjust for a firm, comfortable fit.
- Ensure the cushions seal tightly against your head with no interference from foreign objects between the ear cup and your head (such as pencils or glasses temple arms). Spread the ear cups only enough to clear the ears. Do not return or reshape the headband.
Factory reset
- All preset stations and other settings will be deleted.
- Press and hold the Menu button, press Tune – or Tune + to find ’System Reset’. Press Enter.
Software version
- Press Menu and then press Tune – or Tune + to find ’Software version’. Write it down here:
Storage
- Do not store the hearing protector at temperatures exceeding +55°C, for example on a dashboard or windowsill. Do not store the hearing protector at temperature below -20°C. Under extremely cold conditions, warm the hearing protector before using.
Safety instructions
- This hearing protection is designed to protect your hearing from hazard noise.
- Check at regular intervals that the product is undamaged and working properly. Worn or damaged earmuffs can result in inferior protection. If the cups are cracked, if the seals are worn or defective, or if they have been exposed to chemicals, they should be discarded and replaced. The earmuffs, especially the sealing rings, can deteriorate over time and should always be examined before use to make sure they are not cracked or admit noise.
- Attaching hygienic protection on the pads can affect the acoustic properties of the cups.
- Failure to follow these instructions will seriously reduce the protection provided by the earmuffs.
- The earmuffs limit the sound pressure level for entertainment sound to 82 dB (A).
- Do not use product for long periods at high temperatures or high relative humidity, it may damage the radio.
- Do not subject the product to knocks and blows, this can reduce the protective capacity and/or damage the radio.
- The product has a radio function and can be connected to audio units for entertainment. Always check before using the product that it is working properly. Contact the store where you bought the product if the product is damaged, or not working properly.
- The use of the entertainment function can make it more difficult to hear warning signals at the workplace.
- The emitted sound level from the entertainment function can exceed the permissible sound level.
- The quality of the radio receiver is influenced by the surroundings. The radio reception can deteriorate when in motion. Televisions, fluorescent lighting or other electrical appliances can cause interference.
- Do not expose the product to direct sunlight – risk of deformation and/or malfunction. Do not expose the product to temperatures over 55℃.
- Some chemicals can have a negative effect on the product.
- Do not immerse the product in water or any other liquid.
- Clean and disinfect the headband, cups and sealing rings regularly with a cloth moistened with hot water and mild detergent, especially after prolonged use or if moisture has collected in the cups. Only use detergent that does not irritate the skin. Allow it to dry before use. Remove the batteries if the product is not going to be used for some time.
- Improper use and failure to follow the instructions can result in personal injury and/or material damage.
- Failure to follow the instructions to adjust the earmuffs will result in significantly reduced protection.
- Hygiene covers on the seals can affect the noise damping capacity.
- Do not remove the sealing rings from the product. The headband and sealing rings are not replaceable.
- Contact your dealer if you have any questions, or to obtain more information.
- Earmuffs, and in particular the seals on the cups, can deteriorate as a result of wear and should therefore the regularly checked for cracks and to make sure they seal properly to the ears.
- Adjust and maintain the product in accordance with manufacturer’s instructions for best functionality.
- Failure to follow the instructions will significantly reduce the protective capacity of the ear protection.
Symbols
Description of symbols used on the product. Familiarize yourself with them to reduce the risk of personal injury and material damage.
Technical data
Please note
- For best performance, the earmuffs are fitted, adjusted and kept maintenance in accordance to manufacturer’s instruction.
- It is important to wear the earmuffs at all times in noisy surroundings to avoid the risk of hearing damage.
- Inspect the earmuffs regularly for serviceability.
- If the recommendations given above are not adhered, the protection by the earmuffs will be securely impaired.
- This product is durable for 2-3 years usage under proper operation/application unless the headband/ear cushions or the headset is damaged.
Remarks
- The earmuffs provides audio signal sound pressure level limitation and limits the entertainment audio signal to 77,9 dB(A).
- Radio reception quality may be slightly distorted depending on surroundings.
- To prevent damage to the headset and radio function, do not subject it to rough handling.
- These earmuffs are provided with an entertainment audio facility and electrical audio input. The wearer should check correct operation before usage. If distortion or failure is detected, the wearer should refer to the manufacturer’s advice.
- The audibility of warning signals at specific workplaces may be impaired while using the entertainment facility.
- This product has been tested in accordance with harmonized European standards EN352-1:2002, EN352-2-8:2008 and EN 352-6:2003 and complies with the requirements in the PPE regulation (EU) 2016/425.
- This product has been tested in accordance with harmonized European standards EN 301 489-1 v2.1.1:2017, EN 301 489-17 V3.1.1:2017, EN 300 328 V2.1.1:2016, EN 62479:2010, EN 60065:2014 and complies with the requirements of radio equipment in the directive 2014/53/EU.
Guarantee
- If the product fails, please contact your supplier.
- Remember that many outlets will require that you have a valid proof of purchase.
- Any defect that arises due to faulty materials or workmanship will either be replaced, refunded or repaired free of charge where possible during this period by the dealer from whom you purchased the unit.
- The guarantee does not cover accidental damage, misuse, cabinet parts, knobs or consumable items.
- The guarantee will be rendered invalid if the product is re-sold or has been damaged by inexpert repair.
- Specifications are subject to change without notice.
Note: These warranty/guarantee rules apply only for products purchased in Norway, different rules apply in your country.
Monitoring Body: NB1974, PZT GmbH, Bismarckstrasse 264B, D – 26389
Wilhelmshaven, Deutschland – Germany
Hereby, Sahaga declares that the ear muff with radio equipment WOLF Headset
PRO is in compliance with Directive 2014/53 and Regulation (EU) 2016/425. To
receive the full text of the EU Declaration of Conformity please see attached
DoC or contact us at salg@sahaga.com
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>