YEELIGHT C235 Smart LED Ceiling Light User Manual

YEELIGHT C235 Smart LED Ceiling Light

Product Description

Mounting Instructions

1. Open the package and take out the lamp. Then take off the base.
2. Remove the three milky plastic sheets from the base.
3. According to the mounting hole distance of the Besa box on the ceiling, select the corresponding hole on the base, and remove the silicone plug from the base hole. At the same time, a φ4.5mm wire inlet hole should be opened with a tool.

Mount the Base

• Method A: Use an impact drill 6mm in diameter to make two mounting holes with a length of ≥30mm in the wall (as shown in the following figure).Put the expansion tube into the mounting hole,and then tread the power cord throug the threading hole.
  Use self-tapping screws to fix the base on the ceiling,and verify the base is securely mounted.

• Method B: Check that the two mounting points on the light box are intact. Then, thread the power cord through the threading hole. Use metric screws to fix the base on the light box on the ceiling, and verify the base is securely mounted.

• Hook the lamp’s safety rope hook to the base, as shown in following picture.

• The wiring hole is suitable for power leads with a 2 cross-sectional area of 0.75-2.5mm .Strip the power cord by 10-11 mm, and connect the neutral, live wires to the wiring hole.

• Arrange the power cord as shown in the figure, and check the fastness of the wiring.

• A solid or stranded hard wire is used as the power lead.

• Connect the neutral, live wires to the wiring holes marked with N, and L in turn.

1. Hold both sides of the light body with both hands. (Be careful not to press the light-emitting surface.) Align the arrow position of the lamp body with the base arrow position, and gently push both sides upwards at the same time. When you hear the “click” sound, the mounting is complete.
2. Once you have finished mounting, always rotate the light body right and pull the light body up and down to ensure that the lock switch is locked in place.
   • Always check for proper mounting after you have finished. Improper mounting may cause the product to fall.

Connect to Yeelight App

This product can be controlled on Yeelight App and be configured to interact with other Yeelight products.

Download App
Search for “Yeelight” in an App store or scan the QR code on the right to download and install the App.

Add Device

• Go to the Yeelight App homepage, and click “+” in the upper right corner to add your device.
• Proceed with the configuration as instructed on the App.
• Once you’ve added a device successfully, you can find it in the device list.

Note: The operation procedure may differ from what’s described here due to App updates. Please proceed as instructed on the App.
This product can also be controlled on Mi home, Google Home App, and Amazon Alexa. You can download and install one of these Apps from an App store, and configure your device as instructed on the App. After you have finished the configuration, you can use the App to control the light.

Apple HomeKit Smart Control

1. Open the Home app on your iPhone or iPad.
2. Tap “Add Accessories” and follow the instructions to scan the QR code either on the back cover of the user manual or on the base, or enter the 8-digit setup code above the QR code to grant the Apple Home app access.
   • Make sure a Wi-Fi network with Internet access is available (this product does not support 5 GHz networks). To control this HomeKit-compatible accessory, it is recommended that you use iOS 9.0 or above. The HomeKit setup code is in the user manual and on the base, do not lose it. When adding the product to the Home app after the factory settings are restored, you will need the HomeKit setup code again. In case the user manual is lost, scan the QR code or enter the setup code on the base. iPad and iPhone are the trademarks of Apple Inc., and they are registered in the United States and other countries.

Restore to factory settings

Use the wall switch to turn the ceiling light on and off five times consecutively (turn off the ceiling light and wait for two seconds, then turn it on and wait for two seconds, this counts as one time). The ceiling light then starts breathing and automatically restarts afer five seconds, and the factory setings of the ceiling light have been restored.

Note: When using the ceiling light in a new network environment, you need to restore the factory setings and connect to the network again.

Specifications

• Model: YLXDD-0030 for 235C version YLXDD-0033 for 300C version YLXDD-0034 for 400C version
• Power Factor: 0.8
• Operating Humidity: 0‒85% RH
• Operating Temperature: 40° C
• Color Temperature: 2700‒6500 K
• Rated Input: 220‒240V 〜50/60Hz Max. 0.109A / 0.127A / 0.145A
• Rated Power: 18 W (148 × 0.2 W/LED module + 48 × 0.06W/LED module) 21 W (184 × 0.2 W/LED module + 60 × 0.06W/LED module) 24 W (256 × 1 W/LED module + 84 × 0.06W/LED module)
• Compatible with: Android 4.4 & iOS 9.0 or above
• Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz, Bluetooth 4.2 BLE
• Operating Frequency: 2412-2472 MHz (Wi-Fi) 2402-2480 MHz (BT)
• Maximum Output Power: 20 dBm (Wi-Fi) 0 dBm (BT-LE )
• This product contains a light source of energy efficiency class < 235C&300C F；400C E> Replaceable (LED only) light source by a professional

Product Features

Precautions

• Make sure the voltage is consistent with the ceiling light’s operating voltage before use. Using themismatched voltage may damage the ceiling light and cause safety hazards.
• Do not replace the light source of the ceiling light by yourself. The light source should only be replaced by the manufacturer, afer-sales service, or a qualified electrician.
• The ceiling light generates heat during working. Please keep it is well ventilated for heat dissipation.
• This ceiling light can be controlled by an app. Turning off the ceiling light by app does not cut it off from the electricity, hence, do not touch, replace, or disassemble this ceiling light. Otherwise, it may cause an electric shock, injury, or even death.
• The light installation requires a qualified electrician, and the wiring must comply with IEEE electrical standards or national standards.
• The ceiling light should be installed in a stable location to prevent it from dropping down or falling off.
• Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.
• For indoor use only.
• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.

EU Declaration of Conformity

Hereby, Qingdao Yeelink Information Technology Co., Ltd. declares that the radio equipment type YLXDD-0030/YLXDD-0033/YLXDD-0034 is in compliance with Directive 2014/53/EU.

WEEE Disposal and Recycling
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/ EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

UK Declaration of Conformity
Hereby, Qingdao Yeelink Information Technology Co., Ltd. declares that the radio equipment type YLXDD-0030/YLXDD-0033/YLXDD-0034 is in compliance with Radio Equipment Regulations 2017. Manufacturer: Qingdao Yeelink Information Technology Co., Ltd Address: 10F-B4, Building B, Qingdao International Innovation Park, No.1 Keyuan Weiyi Road, Laoshan District, Qingdao City, Shandong Province, P.R.China Website: www.yeelight.com Customer Service Email: support@yeelight.com

References

• 易来全案智能照明，服务全球百万家庭

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>