YEELIGHT YLYK01YL Bluetooth Remote Control Instructions

YEELIGHT YLYK01YL Bluetooth Remote Control

Product Information

The Yeelight Crystal Remote Control is a Bluetooth 4.2 BLE remote control device used to control lights. It operates with a CR2032 battery (not included) and has a model number YLYK01YL. The operating temperature range is not specified, and it should be used in an operating humidity range that is not specified either. The remote control offers wireless connectivity and is manufactured by Qingdao Yeelink Information Technology Co., Ltd.

Product Usage Instructions

1. Installing the battery:
   • Remove the battery cover.
   • Insert a CR2032 battery.
   • Return the battery cover to its initial position.
2. Pairing:
   • Ensure the remote control and the device are close to each other with no obstructions in between.
   • Within 60 seconds of turning on the device, press the OFF and M buttons on the remote control simultaneously.
   • The remote control indicator will blink to indicate pairing.
   • The device light will flash to indicate that the pairing is completed.
3. Unpairing:
   • Open the app on your device.
   • Find and tap the device on the home page.
   • Tap “Set” and then “Remote Control”.
   • Press and hold the remote control to unpair it from the device.
4. Functions:
   • To turn on the light, use the corresponding button.
   • To turn off the light, use the corresponding button.
   • To adjust the color temperature, use the corresponding button.
   • To switch modes, use the corresponding button.
   • To increase brightness, use the corresponding button.
   • To decrease brightness, use the corresponding button.
5. Safety Precautions:
   • If the battery level is low, replace it with a new battery.
   • Only use the specified CR2032 battery model.
   • Ensure children use this product under adult supervision to prevent swallowing of the cell battery.
   • Remove the battery when the remote control is left unused for a long time.

For more information regarding compliance and recycling, please refer to the user manual.

Instruction

1. Installing the battery

2. Remove the battery cover and install the CR2032 battery. Return the battery cover to its initial position. Battery is not included.
   Battery model must be CR2032.

3. Pairing: Keep the remote control and the device as close as possible and make sure no obstructions between them. Press remote control’s OFF and M button in 60 secs after the device is turned on. The blinking of remote control indicator indicates that it is pairing, and the flashing of the device light indicates that the pairing is completed.

4. Unpairing: Open app, find and tap the device on the home page, and then tap Set-> Remote Control. Press and hold to unpair the remote control.

Functions

On: Turn on the light
Off: Turn off the light

Adjust color temperature
Switch mode
+ Increase brightness
– Decrease brightness

Specifications

Safety Precaution

1. If the battery level is low, replace with a new battery.
2. It may cause a potential safety hazard if other battery models are applied.
3. Children should only use this product under adult supervision to prevent the cell battery from being swallowed.
4. Remove the battery when the remote control left unused for a long time.

EU Declaration of Conformity
Qingdao Yeelink Information Technology Co., Ltd. hereby declares that the Yeelight Crystal Remote Control is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following address: Yeelight Germany GmbH, Flurweg 11, 82402 Seeshaupt.

WEEE Disposal and Recycling
Correct Disposal of this product. This marking indicates that this product should not be disposal with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

About Yeelight
Yeelight is the world-leading smart lighting brand, with in-depth exploration in smart interaction, destinctive design and lighting experience. We continue to define the high standards in the lighting industry, and enjoy a portfolio of smart home lighting products, including home furnishing lights, table lights, ambiance lights and smart lighting control products. Yeelight works relentlessly to integrate cutting-edge technology and professional optical research into our products. If you appreciate our products, feel free to like our fan page on facebook, to rate the products in our online store or to give us a review on google.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>