ELECTUS DISTRIBUTION GH1023 6 Inch USB Desk Fan Instruction Manual
- June 12, 2024
- ELECTUS DISTRIBUTION
Table of Contents
ELECTUS DISTRIBUTION GH1023 6 Inch USB Desk Fan
Product Information
The USB Desk Fan with Clock & Temperature Display is a compact and versatile desk fan that also functions as a clock and displays the temperature. It is a model GH1023 and is distributed by Electus Distribution Pty. Ltd. The fan is powered by a USB power cable and has a power/LED switch for controlling the fan and LED display. The fan features an LED display that shows the time and temperature. It has a time adjustment button for setting the correct time and a time adjustment setting for changing the time. The fan operates at two different RPMs depending on whether the LED is on or off. The dimensions of the fan, including the bracket, are 200mm in height, 190mm in width, and 90mm in depth.
Product Usage Instructions
- To adjust the time, press and hold the time adjustment button for 3 seconds. The minute hand on the LED display will start flashing.
- Press the time adjustment button again to start changing the time. Each press will increment the time by one unit.
- If you want to change the time faster, press and hold the time adjustment button.
- Release the time adjustment button when the time has been adjusted correctly.
- Wait for up to 3 seconds for the adjusted time to take effect.
Note : If the unit is powered off during the time adjustment
process, the time will not take effect.
To control the power and LED display:
- Use the power/LED switch to turn on or off the fan and LED
display.
For additional information or support, please visit www.electusdistribution.com.au
INSTRUCTIONS
Time Adjustment Setting
Press and hold the time adjustment button for 3 seconds. The minute hand will
begin to flash. Press the button again to start changing the time. Press and
hold the button to adjust the time faster. After the time has been adjusted
correctly, release the time adjustment button and wait up to 3 seconds for the
time to take effect.
Note : It takes up to 3 seconds for the time to be adjusted, the time
will not take effect if the unit is powered off between this time.
Power/LED Instructions
- Switch to the left (facing the clock), LED clock, and temperature appear.
- Switch to the right (facing the clock), only the fan will turn on with no LED display.
- Switch to the middle, and turns off both the fan and LEDs.
Specifications
| RPM: | 2000 (LED On) |
|---|
2400 (LED Off)
Power:| 5VDC, 600mA
Dimensions:| 200(H) x 190(W) x 90(D)mm (including bracket)
Distributed by: Electus Distribution Pty. Ltd. 320 Victoria Rd, Rydalmere NSW 2116 Australia www.electusdistribution.com.au Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>