Xiaomi 70mai Dash Cam Pro User Manual
- June 12, 2024
- Xiaomi
Table of Contents
Xiaomi 70mai Dash Cam Pro
USER MANUAL
70mai Dash Cam Pro is an in-car DVR featured multiple functions to promote safer driving experience.
Main Features:
- Parking surveillance
- Advanced driver-assistance system
- Superb day and night vision
- APP enabled, easy play back and download
- Compact design
- 3-minute installation
- Voice control
WDR: Adjust exposure balance, enable the camera to pick up greater details,allowing the dash cam to process more light on the seneor and produce a more vibrant image.
Defog Algorithm: Effectively reduce distortion or degradation of images and reproduce a clear vision while driving in smoke and haze environment.
G-Sensor: Help 70mai Dash Pro to automatically start recording when collision detected. Footage locked in Event File separated from regular file.
140° Wide Angle: Allow a larger viewing angle to be recorded and enable drivers to see 4 lanes of traffic. Along with 6 glass, it can provide light transmission, thus recording crystal clear video.
2592 x 1944 Pixel HD: 2.5 time of the resolution of 1080P HD, produce road movies anytime and anywhere,capture detail of your travel routes, not missing any wonderfulness during the journey.
6-Glass Lens: 6-layers glass lenses allow 70mai Dash Cam Pro to prevent vague in multiple climate environments and conditions along with the effert of Defog.
APP Enabled: Connected with the device’s hotspot,you can obtain the Internet access conveniently, previewing and downloading images of videos on trip without using any mobile traffic.
SONY IMX335,F/1.8: SONY IMX335 is a type of image sensor widely used in cameras for its capability to capture clear, high definition shots and footage even in low-light conditions.
Product overview
Installation
Please install the product following the method below.
1. Install the electrostatic sticker
Take out the electrostatic sticker from the packing box and install it in the
recommended area on the windshield, as shown in the figure below. Please
clean the windshield, and remove the air bubbles between the electrostatic
sticker and the windshield during the installation.
2. Connect the Dash Cam Pro to the bracket
Lock the bracket to the Dash Cam Pro, as shown in the figure below. You will
hear a snap when it is in place.
3. Attach the Dash Cam Pro
Remove the protective sticker on the Dash Cam Pro bracket and attach the Dash
Cam Pro to the center of the electrostatic sticker, as shown in the figure
below. Press the bracket mount by hand to ensure that the heat resistant
adhesive is in close contact with the electrostatic sticker.
4. Connect the power supply
As shown in the figure, run the power cable along the top of the windshield,
down pillar A, and around the passenger-side glove compartment. Arrange the
end so that it runs to the cigarette lighter port. After connecting it to the
car charger, plug the charger into the port
5. Adjust the Dash Cam Pro angle
Turn on the Dash Cam Pro and adjust the camera angle up and down against the
preview screen to ensure that the camera is facing the front.
Activating 70mai Smart Dash Cam Pro
The 70mai Smart Dash Cam Pro must be activated using the 70mai app. Please visit the website below to download and install the 70mai app.
Please select “Add Device” in the 70mai app and complete the activation according to the prompts.
Specifications
Image sensor: SONY IMX335
Resolution: 2592×1944
Camera: FOV 140°, F1.8, 6 glass
Wireless connection: Wi-Fi IEEE 802.11 b/g/n/ 2.4GHz
G-sensor: Acceleration sensor
Expandable memory: MicroSD card with capacity of 16-64GB and read/write speed
of Class10 and above
Supported OS: Android4.4/iOS8.0 and above
Power supply: car cigarette lighter
Battery type: li-polymer battery
Battery capacity: 500mAh
Input: 5V 2A
Operating temperature: -10°C ~ 60°C
Dimensions: 82 × 58.2 × 40.5mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>