YEELIGHT YLYTD-0011 4 In 1 Rechargeable Desk Lamp User Manual
- June 12, 2024
- Yeelight
Table of Contents
Yeelight4-in-1 Rechargeable Desk Lamp
User Manual
Installation:
Desk lamp Application:
- Screw the lamp pole into the base.
- laser the lamp body at the ring base on the pole, it will be automatically absorbed.
- The lamp head can be adjusted to an angle of 180° .
Torch Application:
l.Hold the lamp by hand.
Wall lamp Application:
- Wipe the position(wall/cabinet) where the lamp is to be installed, and paste the magnetic patch.
- Attach the magnetic wall mount to the magnetic patch.
- lign the tail of the lamp with the ring position on the base, and it will be automatically absorbed.
•p[ease press the magnetic patch for 30s after pasting it and let it stand for 3-4 hours, and then absorb the magnetic base.
Clip on lamp Application:
- Clamp the clip to the position to be installed.
- Attach the magnetic wall mount to the groove of the clip, align the tail of the lamp with the ring position on the base, and it will be automatically absorbed.
Charging:
- Plug the USB charging cable into the Type-C charging hole at the bottom of the lamp, and power on. The charging indicator light shows red to indicate that it is charging, and the charging indicator light turns off when charging is completed.
- When the light flickers during use, please charge it in time;
- If there is no response when you turn it on, please charge the lamp first, and then start to use after charging for a few minutes.
Button Functions:
Short Press: ON/OFF
Press and hold: Adjust brightness, release to keep the light in the current
state 9. 10. 11.
Description:
Notes:
There is no power adapter with the lamp, please use a DC SV/lA adapter that
meets safety requirements for charging.
Do not use power adapters or other devices with output voltage greater than DC
SV to charge the lamp.
Do not use power adapters that have not passed safety certification to avoid
damage to your personal and property safety. 
Product Features:
Specifications:
Name: Yeelight 4-in-1 Rechargeable Desk Lamp
Model No: YLYTD-0011
Luminous Flux: 85lm
CRI: Ra;a,80
Operating Temperature: -l0° C-40 °C
Operating Humidity: 0%-80% RH
Battery capacity: 1800mAh
Color temperature: 4000K
Rated Input: SV = lA
Rated power: SW Max
Universal light source: irreplaceable LED beads 12×0.SW
Dimension:
Service Life: Approx.25000h
Pad<.age contents: User manual, Power cable, Lamp body, Lamp base, Lamp pole,
Magnetic wall base, Clip.
Precautions:
-
Please charge the product before first use, the rated voltage is DC SV, please use SV-lA adapter. Please use the cable included in the package or other cables that meet the requirements of the lamp’s rated voltage and current to charge the product.
-
Do not use the product in an unstable, flammable and humid environment, so as to avoid fire accidents caused by product damage or short circuits.
-
Do not disassemble, squeeze, pierce, short-circuit the product or throw it into fire to avoid explosion.
-
The operating temperature of the product should be not higher than 40 c
c. Do not store it in an environment above 60° C to avoid other dangers. -
When the lamp is working, do not let children play or look directly at the light source to avoid damage to children’s eyes.
-
If the product is not used for a long time, it is necessary to charge the battery every 3 months to avoid the battery being too low due to long time storaged, resulting in irreversible capacity loss or damage.
-
The light source of the product is irreplaceable. When the light source cannot be used normally,please replace the entire product.
-
Rechargeable batteries contain substances that pollute the environment. When you decide to give up the product, please hand it over to a competent department for recycling.
-
The product will generate heat during operation. Please keep proper ventilation.
-
Please cutoff the power before clean product. Please wipe it with a soft cloth dampened in soapy water, then wipe with a dry cloth. Do not use other reagents to avoid discoloration or damage to the product.
-
Not suitable for mounting on tubular material.
Non-Warranty Regulations:
- Unauthorized maintenance, misuse, collision, neglect, abuse, water ingress, accident, modification, improper use of non-product accessories.
- Tear up, alter labels or anti-counterfeiting signs, etc.
- Overdue warranty.
- Damages caused by force majeure.
- The product and its accessories are damaged due to human reasons. Such as using dimmers, non-rated voltages and non-recommended adapters, using in non-specified environments, etc., resulting in product malfunctions.
Read this manual carefully before using the product.
Customer support: www.yeelight.com
Tel.: 400-619-7969
Manufacturer: Qingdao Yeelink information Technology Co.,Ltd.
(a Mi Ecosystem company)
Address: 10-B4 Qingdao innovation Park B,Qingdao,China.
Call 400-619-7969 for customer support.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>