tekkiwear SH-7196 Rechargeable Hair Clipper User Manual

tekkiwear SH-7196 Rechargeable Hair Clipper

Product Information

This product is an electric shaver designed for shaving facial hair. It features a rechargeable battery that provides a ten-day runtime after a full charge. The shaver head and whisker storeroom can be cleaned with water for better hygiene. The product comes with a brush for cleaning the hair storeroom. It is recommended to replace the knife head and knife net every six months for optimal shaving performance.

Before using the product, please read carefully the operating instructions and keep properly for future reference.

1. Only USB standart charger can be used with this product.
2. Charge voltage 5V(USB).
3. The temperature for the product’s charge and storage should be between 5 and 35 ºC
4. Make sure the charge will not become damp (Fig 1).
5. Do unplug the charger before cleaning the shaver with running water (Fig 2).
6. Knife head can be washed without washing the body.
7. This product cannot be used by physically distempered, sensorially or mentally disordered, or inexperienced persons (including children), unless they are under supervision or instruction by people in charge of their security.
8. Take care of children to keep them away from this product.
9. When the shaver is charging, the indicator lamp will be off. Press the switch button back to the off state for charge.
10. It’s necessary to ensure to put the protective cover on the shaver when you travel to protect the shaver head.
11. Please clean inside beard if the shaver can not work after you press the switch.

Product Usage Instructions

Charge
Make sure the product is power-off before the charge. The charge lasts about 3hours. It’s better for the product not to be connected to the power supply for more than 24 hours._ ( Remark:The indicator light will not change or turn off when it is fully charged.)

1. Insert the product charger into the shaver (Fig 3).
2. Plug in the charger.
3. The charge indicator will light up (Fig 4).
4. After a full charge, unplug the charger and remove the product’s plug from the shaver.

How to Use Product

Shaving

1. Press the ON/OFF button to start the shaver.
2. Move the shaver head quickly on the skin in straight lines and circles (Fig 5).
3. The shaver can run for ten days after a full charge.

Cleaning & Maintenance

To ensure a better shaving effect, the shaver must be cleaned regularly. The easiest and most sanitary way to clean the product is to wash the shaver head part and the whisker storeroom with water each time after using it. Do be careful while using hot water. Do remember to check the water is not too hot to avoid harming hands.

Every day : the shaver head part and the hair storeroom.

Daily Cleaning

1. Turn off the power supply, unplug the charger, and remove the product’s plug from the shaver.

2. Open the shaver head part (Fig 7).

3. Clean both the shaver head part and the hair storeroom thoroughly with hot running wáter (Fig 8).
   Make sure both of the shaver head part and the hair storeroom be cleaned thoroughly.

4. Wash the surface of the product (Fig 9).

5. Close the shaver head part and drain off any excess water. Do not wipe with a towel or tissue which may cause damages to the shaver head.

6. Open the shaver head part again and let it dry completely (Fig 10).

7. Use the included brush to clean the hair storeroom without using water.
   You can also use the brush included to clean the hair storeroom. Here water should not be used.

Store
It is recommended to dry the electric shaver first, and put on a protective cover to prevent damage to the blade net and to avoid dust accumulation in it Replace the cutter head In order to get the best shaving effect it is recommended to replace the knife head and knife net every 6 months, please use original accessories.

You can also use the brush included to clean the hair storeroom. Here water should not be used.

Deep Cleaning

1. In the opened head cover, turn the fixing frame release button counterclockwise to remove the fixing frame.
2. Remove the knife net (Fig 11).
3. Separate the knife net and clean it using the cleaning brush (Fig 12).
4. After cleaning, insert the knife net and the fixing frame back into the head cover in reverse order (Fig 13).

Maintenance

1. It is recommended to clean the knife net every two months.
2. Regularly clean the electric shaver for better shaving performance.
3. Do not use a towel or paper towel to wipe the electric shaver knife net.

Environmental Protection

1. When discarding the product, do not put it with general domestic rubbish. Instead, hand it to an officially designated recycling center for environmental protection (Fig 14).
2. The built-in rechargeable battery contains substances which may pollute the environment, so it must be unloaded from the product or sent to the officially designated recycle center to be disposed before it is discarded.

The battery should not be unloaded unless it has been used up.

1. Unplug the charger and also pull out the product’s plug from the shaver.
2. Unload the battery. Do not plug in the shaver again after unloading the battery.
3. We recommend going to a specialized technical service when you need to replace the battery.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>