SECOMP VALUE 21.99.1193 PoE+ Switch, Gigabit Ethernet User Manual
- June 16, 2024
- SECOMP
Table of Contents
SECOMP VALUE 21.99.1193 PoE+ Switch, Gigabit Ethernet User Manual
Overview
The PoE Switch 21.99.1193 provides 8×10/100/1000BaseTx PoE ports and complies with IEEE802.3af/at PoE standards. It provides max. 30W PoE power for powered devices (PD) such as IP cameras, wireless AP, IP telephones, where power cabling is not available. It also provides 1×10/100/1000Base-Tx and 1x1000BaseFx SFP uplink ports. It is an economic and high-performance PoE connectivity solution for SOHO, Enterprise networking, or CCTV systems.
Packing list
Before installing, please check if the package and accessories are complete:
- PoE Switch x 1pc
- Power cord x 1pc
- User Manual x 1pc
If you find any components damaged or missing during transport, please inform our company or distributors as soon as possible.
Features
- Supports 8×10/100/1000Base-T PoE
- Supports 1×10/100/1000Base-T and 1x1000Base-Fx SFP uplink ports
- Supports auto MDI/MDI-X
- Supports IEEE802.3af/at POE standards, maximum 30W output on each port
- 20G switching capacity, ensuring line speed transmission
- Supports one key VLAN mode
- Supports AC100~240V 50/60Hz, or DC48V input
- Reliable design of built-in power, total 120W
- Anti lightning and surge protection
Panels
DIP Switch
LED Indicator
Installation Guide
Power supply socket specification
Connect the power cord
Check the selection of power supply and the switch marking requirements;
Built-in power adapter, direct access to AC100~240V, 5060Hz.
Inspection after installation
Check if there is enough space for heat exchange and the air circulation is
smooth. Check if the power supply socket meets the specification. Check if the
power supply, switchboard, rack and other equipment are properly grounded.
Attention
During installation, the power supply must be disconnected and you must wear an antistatic wrist. Make sure that the power voltage meets the requirements of the switch. Make sure that the circuit of the switch is not overloaded before turning it on. Do not open the case of the switch to avoid the risk of electric shock. Do not clean the switch with wet substances or liquids, and turn it off before cleaning. Do not place heavy objects on the switch.
Specification
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>