homestyle 5911-501 Queen Headboard Instructions

homestyle 5911-501 Queen Headboard

IMPORTANT

• Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage.
• Carefully and strictly follow these assembly instructions to ensure a completed product is as designed.
• Do not use power tools above 8 volts to assemble.

Part List

Hardware List

Model 5911-501

Assembly Instruction

IMPORTANT

• Use a soft cloth between these parts and the floor.
• Do not use power tools above 8 volts to assemble.
• Do not tighten all the bolts until each part is properly assembled.
• Keep the Wrench and Hex Wrench as the Nuts and Head Cap Bolts may need to be tightened in the future.

STEP 1
Insert Cam Lock Screws into pre-drilled holes in Crown (A), Posts (B), (C) and Stretcher (E), then tighten.

STEP 2
Attach Stretcher (E) to Headboard (D) with Dowels (short) and Cam Locks. (See Figure 1)

STEP 3
Insert Bolts into pre-drilled holes in Posts (B) and (C), then tighten.

STEP 4
Attach Posts (B) and (C) to the unit with Dowels (long), Cam Locks, Square Washers, and Nuts.
Tighten the Nuts with a Wrench. (See Figure 2).

STEP 5
Attach Corner Plates to the unit with Flat Washers, Spring Washers, and Head Cap Bolts.
Tighten Head Cap Bolts with Hex Wrench. (See Figure 3).

STEP 6
Attach Plates to the unit with 5/8″ Flat Head Screws. (See Figure 4).

STEP 7
Attach Crown (A) to the unit with Dowels (short), Cam Locks, and 5/8″ Flat Head Screws.

CARE INSTRUCTIONS

• NEVER
  allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate.

• NEVER
  use glass cleaners on finished furniture. Ammonia chemically attacks the finish.

home styles will provide replacements free of charge for missing or damaged parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer, homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor are parts available for sale. Replacements for missing or damaged parts may be requested via the contact info below.

Model 5911-502

IMPORTANT

• Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage.
• Carefully and strictly follow these assembly instructions to ensure a completed product as designed.
• Do not use power tools above 8 volts to assemble.

Part List

Hardware List

Assembly Instruction

IMPORTANT

• Use a soft cloth between these parts and the floor.
• Do not use power tools above 8 volts to assemble.
• Do not tighten all the bolts until each part is properly assembled.
• Keep the Wrench and Hex Wrench as the Nuts and Head Cap Bolts may need to be tightened in the future.

STEP 1
Insert Bolts into pre-drilled holes in Posts (F) and (G}, then tighten.

STEP 2
Attach Posts (F) and (G) to Footboard (H) with Dowels (long}, Square Washers, and Nuts.
Tighten the Nuts with a Wrench. (See Figure 1)

STEP 3
Attach Plates to the unit with 5/8″ Flat Head Screws. (See Figure 2).

STEP 4
Insert Cam Lock Screws into pre-drilled holes in Crown (A), then tighten.

STEP 5
Attach Crown (A) to the unit with Dowels (short), Cam Locks, and 5/8″ Flat Head Screw.

CARE INSTRUCTIONS

• NEVER
  Allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate.

• NEVER
  Use glass cleaners on finished furniture. Ammonia chemically attacks the finish.

homestyles will provide replacements free of charge for missing or damaged parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer, homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor are parts available for sale. Replacements for missing or damaged parts may be requested via the contact info below.

Model 5911-503

IMPORTANT

• Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage.
• Carefully and strictly follow these assembly instructions to ensure a completed product is as designed.
• Do not use power tools above 8 volts to assemble.

Part List

Hardware List

Assembly Instruction

IMPORTANT

• Use a soft cloth between these parts and the floor.
• Do not use power tools above 8 volts to assemble.
• Do not tighten all the screws until each part is properly assembled.
• Keep the Wrench as the Nuts may need to be tightened in the future.
• Do not slide the bed on the floor. Moving assembled bed requires two people. Remove any bedding, then lift and carry the bed.

STEP 1
Insert Bolts into pre-drilled holes in Headboard and Footboard, then tighten.

STEP 2

• Attach Side Panels (I) to Headboard and Footboard with Square Washers and Nuts.
• Tighten all Nuts with a Wrench. (See Figure 1)
• Insert Legs (K) into pre-drilled holes in Stretchers (J), then tighten.
• Attach Stretchers (J) to the unit with Wood Screws into pre-drilled holes.
• Level the unit by adjusting the adjustable levelers on the bottom of the legs. (See Figure 2)
• Note: The unit must be level to work properly.
• Note: Do not slide the bed on the floor. Moving assembled bed requires two people. Remove any bedding, then lift and carry the bed.

CARE INSTRUCTIONS

• NEVER
  Allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate.

• NEVER
  Use glass cleaners on finished furniture. Ammonia chemically attacks the finish.

homestyles will provide replacements free of charge for missing or damaged parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer, homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor are parts available for sale. Replacements for missing or damaged parts may be requested via the contact info below.

Model 5911-42C

IMPORTANT

• Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage.
• Carefully and strictly follow these assembly instructions to ensure a completed product as designed.
• Do not use power tools above 8 volts to assemble.

Part List

Hardware List

Tool(s) required for assembly: Phillips screwdriver, Level.

Assembly Instruction

IMPORTANT

• Use a soft cloth between these parts and the floor.
• Do not use power tools above 8 volts to assemble.
• Do not tighten all the screws until each part is properly assembled.
• The unit must be level to work properly. Use the included adjustable levelers to level.

STEP 1
Insert Cam Lock Screws into pre-drilled holes in Top (A), Side Panels (B), (C), and Bottom (E), then tighten.

STEP 2
Attach Rail (D) to Side Panels (B) and (C) with Cam Locks. (See Figure 1).

STEP 3
Attach Bottom (E) to the unit with Dowels and Cam Locks.

STEP 4
Attach Top (A) to the unit with Dowels and Cam Locks.

STEP 5

• Attach Feet (G) to the unit with Head Cap Bolts, Spring Washers, and Flat Washers.
• Tighten Head Cap Bolts with Hex Wrench. (See Figure 2)
• Attach 1 1/4″ Round Head Screws to the unit.

STEP 6

• Turn the unit to its upright position.
• Level the unit by adjusting the adjustable levelers on the bottom of the unit. (See Figure 3)
• Note: The unit must be level to proceed.
• Attach Back Panel (F) to the unit with 1 /2″ Round Head Screws. (See Figure 4).

Drawer (H)

STEP 7
Attach Drawer Sides (H3) and (H4) to Drawer Back (H2) with 1 1/4″ Flat Head Screws.

STEP 8

• Insert the Drawer Bottom (HS) into the groove.
• Attach the Drawer Front (H1) to the unit with 1 1/4″ Flat Head Screws.

STEP 9
Attach the Handle with Machine Screws.

Note: Drawer assembly is not complete until 3/4″ Flat Head Screws are used in a later step.

Part List

STEP 10
Loosen slightly screws pre-installed on the back of the drawer front.

STEP 11
Insert the drawer into the unit, then adjust the drawer front panel left or right and up or down until drawer gaps look proportional.

STEP 12

• Pull the drawer open slowly, then re-tighten the screws from Step 10.
• Make sure the drawer front panel does not move and lock the drawer front panel into position with 3/4″ Flat Head Screws.
• Note: These 3/4″ Flat Head Screws must be installed to complete the drawer assembly.

STEP 13
Slide Drawer (H) into position.

CARE INSTRUCTIONS

• NEVER
  Allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate.

• NEVER
  Use glass cleaners on finished furniture. Ammonia chemically attacks the finish.

homestyles will provide replacements free of charge for missing or damaged parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer, homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor are parts available for sale. Replacements for missing or damaged parts may be requested via the contact info below.

homestyles Customer Service:
www.homestylesfurniture.com, servicedesk@homestylesfurniture.com, 888-680-7460.

References

• homestyles Furniture — homestylesfurniture

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>