ufesa 10105436 Heating Pad Instruction Manual

ufesa 10105436 Heating Pad

Product Information

Product: UFESA Heating Pad

Description: The UFESA Heating Pad is designed to provide warmth and comfort. It features an on-off switch, temperature level selection key, operation time selection key, safety autostop activation indicator, temperature level indicator, and operation time indicator. The heating pad is suitable for use at altitudes up to 2000m above sea level.

ProZduct Usage Instructions

1. Ensure the product is disconnected from the power source before cleaning.
2. Do not allow children aged 3 to 8 years to use the device unless the controls have been preset by a parent or guardian or the child has been properly instructed on how to use the controls safely.
3. Children should not play with or clean the product without supervision.
4. The product should not be used by people insensitive to heat or highly vulnerable individuals who cannot react to overheating.
5. When using the product for an extended period, such as during sleep, set the temperature level to 1 for continuous use.
6. The UFESA Heating Pad is not intended for medical use in hospitals.
7. Regularly inspect the product for signs of wear or damage. If any signs are detected or if the appliance is not working properly, contact an authorized service center before reconnecting it.
8. If the cord is damaged, do not use the product. Take it to an authorized service center for repair or disposal.
9. Do not use the product if it is wet or damp. Avoid immersing the remote control in water. Dry the product before use if it shows signs of moisture.

Please refer to the instruction manual for further details on cleaning, storage, and disposal of the UFESA Heating Pad.

WE WOULD LIKE TO THANKS YOU FOR CHOOSING UFESA, WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.

IMPORTANT WARNING:

KEEP IT FOR FUTURE USE
PLEASE READ THE INSTRUCTIONS FOR USE CAREFULLY PRIOR TO USING THE PRODUCT.
STORE THESE IN A SAFE PLACE FOR FUTURE REFERENCE.

DESCRIPTION

• A On-off switch
• B Temperature level selection key
• C Operation time selection key
• D Safety Autostop activation indicator
• E Temperature level indicator
• F Operation time indicator

SAFETY INSTRUCTIONS

• Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the product label.
• Children under the age of three should not use this appliance due to their inability to react to overheating.
• This product can be used by children aged 8 and older and anyone with reduced physical, sensory or mental abilities or lack of experience and knowledge, while under the supervision of an adult or that are directed on how to use it safely and who understand the dangers.
• The device must not be used by children from 3 to 8 years of age unless the controls have been preset by a parent or guardian, or the child has been at least properly instructed on how to use the controls in a secure manner.
• Children must not play with the product. Children should not clean or carry out maintenance without supervision.
• This product should not be used by people insensitive to heat and other highly vulnerable people who are unable to react to overheating.
• When the product is to be used for an extended period of time, such as when sleeping, the controls should be adjusted with temperature level 1 for continuous use.
• This device is not intended for medical use in hospitals.
• Examine the product on a frequent basis for signs of wear or damage. If there are any signs or if the appliance has been used improperly or is not working, contact an authorized service centre prior to reconnecting it.
• If the cord is damaged, do not use the product. The product must be taken to an authorized service centre for repair, otherwise, the product will have to be discarded.
• Do not use the product if it is wet or damp. Never immerse the remote control in water. Dry the product prior to use if it shows any signs of moisture.
• Follow the storage and disposal instructions manual for this product in relation to cleaning and storage of the same.
• This device is designed for use at a maximum altitude up to 2000m above sea level.

IMPORTANT WARNINGS

The mains connection cable must not be tangled or wrapped around the product during use.

• Do not pull on the cable to unplug it or use it to carry the product.
• Do not wrap the cable around the control.
• Do not cover or lay the control on top of the regulator control during use in order to ensure its proper operation.
• Do not cover the product with any heavy or thick objects and do not place on top of any other heating elements.
• Use without folding.
• Do not stick any pins or needles or any other pointy metal objects into the product.
• Do not use the product to warm up animals.
• Materials will suffer wear and tear over time and after prolonged use.
• Unplug the product immediately from the mains in the event of any breakdown and contact an authorised Technical support service.
• In order to prevent any risk of danger, do not open the remote control or the connection.
• Only qualified technical personnel from the brand´s Official Technical support service may carry out repair or procedures on the device.
• Any incorrect use or improper handling of the product shall render the warranty null and void. Only an authorised technical support service centre may carry out repairs on the product.
• B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the non-observance of these warnings.BASIC CONTROLLER FEATURES Different additional functions have been added to the exclusive remote control of the new generation and innovative UFESA heating pad range.

The user can select between two different working modes:

1. Free mode: The regulator operates at the desired temperature setting. The user can set between 1-2-3-4 different temperature level (E).
   If the user does not set up any operation time (F), the heating pad will work until a maximum of 90 minutes. After that time, the controller will automatically set default temperature level 1.

2. Automatic stop mode: The regulator activates the heating pad operation with the temperature (E) and operation time (F) selected by the user. The user can set between 1-2-3-4 different temperature levels (E) and operation time is 45-60-90 minutes (F). Once the selected operation time is elapsed, the controller will automatically turn off the heating pad.

AUTOMATIC SAFETY AUTOSTOP

In order to prevent the user from being exposed to any risks arising from inadvertently leaving the heating pad switch on for an extended period of time, an automatic safety autostop is included in all regulator models as a series feature. The autostop is automatically activated after 8 hours of continuous working without any key press on the controller. Once the safety autostop is activated, the heating pad remains disconnected from the power and the safety autostop activation indicator remains light up (D).
All you need to exit the autostop mode is to press any button on the control keypad. At this moment, the regulator will return to default mode established (free mode, temperature level 1).

INSTRUCTIONS FOR USE

1. Connect the heating pad to the appropriate mains.
2. Turn on the product by sliding the on/off switch (A), setting it to the “I” position. The electronic control will immediately start a quick check to detect any possible problems indicated through a LED scan. After that, the product is set in the default working mode: minimum temperature level 1 light up and free mode (no operation time selected).
3. Set the desired temperature level from the available 4 levels (E) by repeatedly pressing the temperature level selection key (B). From that moment, the heating pad operates normally in free mode. In that mode, only temperature level indicator (E) remains light up on the control screen, any other lights will remain turned off. As a security measure, the heating pad will automatically reduce its temperature after 90 minutes of continuous use.

After that time, the controller will automatically set default temperature level 1.
Please notice that high temperatures are not required to achieve heat benefit effects and an excessive continued heat applied directly to the skin may lead to burns. The highest regulator temperature settings must only be used for the time required to achieve a comfortable temperature. After that it is recommended to gradually reduce the temperature to a lower setting.

As it is mentioned, if you notice that the temperature is reducing after some period of time use, this is completely normal and it is not indicative of any fault rather than the automatic high temperature time control system has been activated, in order to prevent any excessive application heat to the skin.
Always allow the heating pad to cool down prior to storage and never store with other objects placed on top of the pad.

TROUBLESHOOTING GUIDE

Possible operational problems

The control screen does not light up when the on/off side switch is activated.| Check that there is voltage in the outlet used, and that the heating pad is correctly plugged into it. Ensure that the on/off side switch is in the “I” setting.
The heating pad does not heat up.| The pre-selected  time  stop  or  the safety autostop may have been activated. Check the heating pad is operational, checking that any one of the LEDs are on.

If any doubt, press any keys to return to “Free mode” or turn the on/off side switch button.

After turning it on, the control screen is not set up in “Free mode”, temperature level 1 and the heating pad does not heat up.| The control may have an abnormality during start-up leading to the locking of the pad’s operation for safety reasons.

Turn the control off and on again. If the problem continues, contact an authorized technical support service centre.

After turning it on, the control screen is set up in “Free mode”, temperature level 1 and the heating pad does not heat up.| If the heating pad does not heat up, cover it with a blanket, towel or thick cloth, place the regulator in the maximum setting and wait for 45 minutes.

If it still does not heat up, contact our authorized technical service. Check made on the heating pad outdoors are not reliable as this may lead to erroneous heat readings.

The heating pad only heats up a little| If the heat felt is  considered insufficient  at its maximum setting, we recommend placing the heating pad directly in contact your skin, covering the opposite side of the heating pad with a towel or similar garment, thus preventing the heat from dissipating into the air.
The control screen displays incomprehensible information. The LEDs flash continuously.| The control may have an abnormality,  leading to the locking of the heating pad’s operation for safety reasons. Turn the control off and on again. If the problem continues, contact an authorized technical support service centre.

The heating pad reaches temperatures between 70ºC and 80ºC at its maximum setting.
This is for guidelines purposes only. The readings take place in laboratory conditions,according to procedure described in standard UNE-EN 60335-2-17.

PRODUCT DISPOSAL AND CONSERVATION

PRODUCT CONSERVATION
Unplug the product when you do not intend to use it for an extended period of time to prolong its shelf-life. Prior to storing the product, allow it to cool before folding, keep it in its original packaging in a dry location with the fewest possible folds, without placing any objects on top.

PRODUCT CLEANING

Unplug the product prior to cleaning.
Neither the product or the regulator control may be washed by hand or in the washing machine. Instead, use a damp cloth with mild soap.

CLEANING OF THE COVER

The product has an outer removable and washable sleeve. The wrap can be washed by hand or in the machine using liquid soap at a temperature not exceeding 30 °C and selecting a program for washing delicate garments. We recommend using a washing bag to prevent the wear and tear of the sleeve.

PRODUCT DISPOSAL
Do not dispose of the product at the end of its shelf-life. Contact the organic collection centre closest to your home in accordance with the waste electrical and electronic equipment (WEEE) Directive 2012/19/EU to contribute to the protection of the environment. Request detailed information regarding their current methods of disposing of packaging and scrappage of used devices from your distributor.
We hope that you will be satisfied with this product.

B&B TRENDS, S.L. · C.I.F. B-86880473
C. Cataluña, 24 P.I. Ca N’Oller 08130
Santa Perpètua de Mogoda (Barcelona) · España
www.bbtrends.es

SYMBOLS

Carefully read the instructions for use

Do not use when creased or folded

Do not stick any pins or needles or any other pointy metal objects into the pad

Children under the age of three are not to use this appliance due to their inability to react to overheating

Do not wash

Device with double insulation protection complies with the requirements of Class 2 protection

Do not use bleach

Do not use in the drver

Do not iron

Do not dry clean (dry cleaners or launderette)

WARRANTY REPORT

B&B TRENDS, SL. guarantees compliance of this product, for the use for which it is, during the period established by the legislation in force in the country of sale. In the case of breakdown during the term of this warranty, users are entitled to repair or else the replacement of the product at no charge if the former is unavailable, unless one of these options proves impossible to fulfil or is disproportionate. In this case, you can then opt for a reduction in price or cancellation of the sale, which must be dealt with directly with the sales vendor. This also covers replacement of spare parts provided that the product has been used according to the recommendations specified in this manual for both cases, and has not been tampered with by any third party that is not authorised by B & B TRENDS, SL. The warranty will not cover any parts subject to wear and tear. This warranty does not affect your rights as a consumer in accordance with the provisions in Directive 1999/44/EC for member states of the European Union.

USE OF WARRANTY
Customers must contact a B&B TRENDS, SL., authorised Technical Service for repair of the product. Since any tampering of the same by anyone not authorised by B&B TRENDS, SL., or the careless or improper use of the same shall render this warranty null and void.
You must keep the purchase invoice, receipt or delivery docket in order to exercise your warranty rights.
For technical service and after-sales care outside the Spanish territory, please submit your query to the point of sale where you purchased the item.

TECHNICAL ASSITANCE SERVICE

(+34) 93 560 67 05
sat@bbtrends.es

B&B TRENDS, S.L.
C. Cataluña, 24
P.I. Ca N’Oller 08130
Santa Perpètua de Mogoda (Barcelona) España
C.I.F. B-86880473
www.bbtrends.es

Check out your nearest service station at https://sat.ufesa.com/

References

• B&B Trends
• Servico técnico Ufesa – Servico técnico Oficial de marca Ufesa

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>