ADVANTECH PN-2022-04-01 FirstNet Firmware Specific Updates Instructions
- June 12, 2024
- Advantech
Table of Contents
ADVANTECH PN-2022-04-01 FirstNet Firmware Specific Updates Instructions
Product Identification
List of all Affected Products:
- ICR-3241-1ND and ICR-3241W-1ND
Change Description
Change Comments:
- **** The changes described below are valid for FirstNet products only, as stated in the prod- uct identification section above.
- Changes described below have been made in firmware version 6.3.2 unless otherwise noted.
- The firmware filename for the FirstNet routers is ICR-324x-1n.bin. Registered users can download this firmware on the Routers & Firmware webpage.
List of changes:
-
Administration User Account – The root user is disabled for web or SSH logins. Use the admin user account instead. See the router label for a unique password.
-
Disabled User Scripts – User scripts, which could be configured in the GUI before, are not supported anymore. Existing scripts will be converted automatically to a Router App during a firmware update to version 6.3.7.
-
Different Default Settings – The router’s default setting is different from the standard setting due to higher security requirements.
-
No FTP Support – There is no FTP configuration in the
-
No Telnet Support – There is no Telnet configuration in the
-
WiFi Security – Configuration of WEP, WPA1, and WPA2-TKIP WiFi security protocols are not available.
-
HTTP Restrictions – Only HTTPs access can be configured. The minimal configurable TLS (Transport Layer Security) is TLS 1.2.
-
MTU Settings – The MTU (Maximum Transmission Unit) is configured to 1342
-
SNMP Restrictions – SNMP write access is
-
FirstNet Router App Changes – Some features implemented in the FirstNet Router App are now supported by the router firmware. The FirstNet Router App is dedicated to reviewing the required security status of FirstNet routers.