STARWELL 36W IEEE 802.3af-at Gigabit PoE Injector Owner’s Manual
- June 12, 2024
- Starwell
Table of Contents
STARWELL 36W IEEE 802.3af-at Gigabit PoE Injector
Product Information
-
Product Name: 36W IEEE 802.3af/at Gigabit PoE Injector
Product Usage Instructions
- Connect the PoE Injector to a power source using the AC or DC power supply.
- Connect the powered devices compliant with IEEE 802.3af/at standard to the PoE Port of the Injector using an Ethernet cable.
- Ensure that the distance between the PoE Injector and the powered devices does not exceed 100 meters.
- The PoE Injector will automatically detect and identify the powered devices compliant with the standard and provide power supply.
- Verify that the Green LED on the Injector indicates that the POE is powered on.
- Verify that the Orange LED on the Injector indicates that the PD (powered device) is connected.
- If necessary, connect additional devices to the Data Ports of the Injector using Ethernet cables for data transmission.
- The extreme speed transmission feature allows for efficient data transmission with support for different link speeds.
- The plug and play functionality ensures that no additional configuration is required.
Note: Please refer to the user manual for detailed instructions and safety precautions.
This Pot injector is compliant with IEEE 802.3af and IEEE802.3at standard, with auto-detects PD equipment. Provide DC power to Pot devices, plug and play, easy for networking deployment and the output power consumption up to 36W. This POE can auto-start short-circuit function to cut off power supply when meet too high current or electricity interruption, to prevent equipment burnout and avoid networking failure caused by electricity interruption or installing error. This function make the POE can be widely applied to wireless network devices, bluetooth, IP Phone which compliant with IEEE802.3af/at. Matched with Ethernet/ Power separator to change the current networking into source LAN, easy management, strengthen controlling and decrease the maintenance cost.
Key Feature
- Delivers power and data through one Ethernet cable for easy network extension.
- Compatible with IEEE 802.3af/at compliant powered devices.
- PoE Port Delivers power up to 100 meters.
- Plug and Play, no configuration required.
Product Features
Power over Ethernet
Support IEEE802.3af/at standard, automatically detect and identify powered
devices compliant with the standard and provide power supply, single-port
power supply up to 36W.
Power Supply Distance Extension
The power supply distance of standard CAT 5€ and CAT 6E cable is up to 100m.
It can supply power for the PD remotely, which expands the range of Pot
applications, improves wiring efficency, and better for project installation
works.
Extreme Speed Transmission
10/100/1000Mbps/2.5G self-adaptive RJ45 port, extreme speed and high efficient
data transmission, support link-speed forwarding and MDI /MDIX auto-flip
function, plug and play.
Application
Hardware Features
Drawing
