STARWELL PE-L10ZCA 10W Dimmable LED Driver Instruction Manual

STARWELL PE-L10ZCA 10W Dimmable LED Driver

Product Information

The product is a versatile tool designed to enhance your daily activities. It features a compact and ergonomic design, making it easy to handle and operate. With its durable construction, the product is built to withstand regular use and provide long-lasting performance. It offers a variety of functions and features that cater to different needs, making it suitable for a wide range of tasks.

Product Usage Instructions

1. Before using the product, ensure that it is fully charged or connected to a power source.
2. Hold the product firmly in your hand, ensuring a comfortable grip.
3. Identify the specific function or feature you wish to use.
4. Refer to the user manual or instructions to understand the correct method of operating the chosen function.
5. Follow the recommended safety precautions, such as wearing protective gear or avoiding certain materials.
6. To activate a function, press the corresponding button or switch on the product.
7. Use the product according to the desired application, ensuring proper technique and control.
8. After use, turn off the product and store it in a safe and dry place.
9. Regularly clean and maintain the product as per the instructions provided in the user manual.
10. If you encounter any issues or have questions about the product’s usage, refer to the troubleshooting section of the user manual or contact our customer support.

By following these instructions, you can maximize the benefits of using the product while ensuring safe and efficient usage.

Features:

1. Controlled by Tuya mobile app
2. Built in Tuya ZigBee (Tuya Bluetooth) wireless control module
3. Mixing is used to control deep dimming without stroboscopic
4. AC input 200-250v range
5. Natural air cooling, moisture-proof, heat conduction, silica gel heat dissipation process
6. Multiple protection functions
7. Ultra small volume design
8. Crimping design, convenient and fast
9. 4 gear current selection

Application

1. Led two-color light source
2. Villa intelligent lighting
3. Access to third-party language control platform
4. High end commercial lighting

General description

1. The mobile phone TUYA app is used to control the brightness and color temperature. which is stable, not easy to drop the signal, has a long control distance and a large number. and has its own slow on and slow off function. The raw materials used are first-line brands, imported chip ultra deep dimming design, and the internal silicone heat conduction process is adopted to make the heat dissipation balance of electronic components more stable

Specification

Dimensions

Product Label

LED Current Selection

DIP switch for 4 optional currents guick selection see the table below

Working Curve

The use of guidance

Unless otherwise specified, all specifications and parameters are measured at 230VAC input, rated load and 25 °C Ambient Temperature This product has a press line cap at the input, with self-locking clamping, it can be opened up with a screwdriver, then you will see the input terminal connected with the AC line L and the null lime N, The output terminal connect a according to the product label, notice the positive and negative pole.

1. please pay attention to the distinction between input and out put , connect correctly, then power on
2. please connect first the load of the DC output, open the driver after checking; in the constant current mode, if power on at open circuit, please turn off the driver and can’t connect the LED until the electric energy stored by the output release, or it may damage the LED:
3. this type of driver is only limited to the use of the LED lamps the input voltage range is AC200-250V,the heat insulation cotton and other items that obstruct the heat dissipation of the product, which conforms to the product under the specified output voltage, current range, the use environment temperature is -20-45 degrees. and the surface can not cover the conditions of the environment, this product enjoys 5 years of free warranty.

The LED lamp doesn’t bright after the dimming driver is connected at the first time, please turn off the AC input and checkas follow:

• * whether or not DC output bad contact:

  • whether DC output polarity is reversed, or the LED board is welded anti;
  • whether AC input is bad contact, test after eliminating these failures;

The device has good connection, LED lights, but the LED flicker, please turn off the AC input and check as follow:

• * whether or not the parameters and actual parameters match.

  • please timely communicate with us if you have any questions in the using. we will try our best to solve the problems with you.

Statement

• The pictures and specifications are for reference, subject to the real object.
• If there is any change in the specifications, it will be notified separately.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>