Stauer 47998 Ladies Smart Watch User Manual

Stauer 47998 Ladies Smart Watch

WATCH FACE

SUPPORTED DEVICES

QUICK START GUIDE

1.  Download the WearHealth App:
   The wristband requires an app to download before it can be connected to your cell phone. Before downloading the application, please check the requirements for the hardware platform of your mobile phone system. Search method: Scan the QR code to download:

2.  Product activation and charging The initial use of the product requires charging to activate.

3.  Pair Devices Search and link to Bluetooth model, as shown in the picture.

Notifications

After pairing the device, enable notifications when prompted to ensure the watch receives the push notifications from the phone. The watch is enabled to receive notifications from Skype, WhatsApp, Facebook, WeChat, SMS, etc. Once your message is read, press and hold for 3 seconds to return to the main menu.

OPERATION METHODS

• Click/Tap ……………………………Switch Function
• Hold Down/Press …………………………….. Select

OPERATION

•  Before use, be sure your smartwatch is fully charged. If the watch cannot be turned on due to low power, plug the watch into the charger. The watch will hold a single charge for up to 3 days.
•  Turn on and off: Press the screen for more than three seconds.

Brighten Screen

• When turning your wrist, the screen will brighten. To disable this option, change the settings in the wristband management menu.

Measurement Calibration

To ensure accurate measurements, calibration is required. Please calibrate your watch by using your accurate measurements.

Functions

•  Heart Rate
•  Blood Pressure
•  Sleep
•  Stopwatch
•  Sport Mode
•  Alarm Clock
•  Messages

Tap the touch key area on the screen to change functions.

Clock Interface

Press and hold the touch k ey area on the bot-tom of the screen to switch between interfaces.

Sport Mode

• • Press and hold to enter Sport Mode.
•  Measure steps, heart rate and calorie burn.
•  Tap the touch key area to choose specific activity.
•  Use the timer while performing various sports activities. Tap screen to start and stop timer.
•  Press and hold to exit mode.

Blood Pressure

•  Tap the touch key area for Blood Pressure mode.
•  The watch will start measuring blood pressure.
•  The watch will vibrate when the blood pressure measurement is complete.
•  Data is for reference only and NOT FOR MEDICAL USE

Heart Rate

•  Tap the touch key area to Heart Rate mode.
•  Watch will start measuring heart rate.
•  The watch will vibrate when the heart rate measurement is complete.

Pedometer

•  Watch will record the number of steps each day.
•  The steps will reset to zero at 00:00 each day to start recording the new day.

Calories

•  Watch will record the number of calories burned each day based on the measured activity level.

Distance

• Displays the total distance you’ve accumulated each day. Metric units can be set up in the app.

Stopwatch

• Press and hold to enter Stopwatch mode. Tap the screen to start and stop. Press and hold to exit mode.

Sleep Testing

• Displays the total duration of your sleep for the previous night. The duration of sleep testing is from 22:00 of day 1 to 08:00 of day
  1.  Relevant sleep data will be displayed after 08:00. Note: Sleep data tested during any period other than the above duration will not be recorded.

Messages

• The three most recent messages will be stored. Press and hold this icon to view these messages. Swipe left and right to change between messages.

Find My Phone

• Press the screen to find your phone.

Reminder:

• You can set up various reminders such as incoming calls, SMS, alarm clocks, sedentary warnings, meeting reminders, medicine reminders, and hydration reminders.

TROUBLESHOOTING

The watch cannot be found when pairing:

• Ensure your phone is Bluetooth enabled. Make sure the phone and watch are within 1.5 feet of each other.
• The Bluetooth communication range is within 32 feet after pairing.

Restore to factory settings

• After the watch is connected to your cell phone, choose “My wristband management” in the WearHealth app on your phone. Choose “restore factory settings.”

Updating the firmware

• After the watch is connected to your cell phone, choose “My wristband management” in the WearHealth app on your phone. Choose “firmware update.”

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>