AGC 2ALXL-P6I Muzen Disco Portable Bluetooth Speaker Instruction Manual

AGC 2ALXL-P6I Muzen Disco Portable Bluetooth Speaker

Product Information

This product is identified by the Report No.: AGC04316220704AP02. It consists of an EUT (Equipment Under Test) with internal components and a battery. The EUT has multiple internal views, numbered EUT-1 to EUT-6. Additionally, there is a BT (Bluetooth) antenna included.

Product Usage Instructions

To use this product, follow the steps below:

1. Ensure that the battery is properly inserted into the EUT. Refer to the “VIEW OF BATTERY” section in the user manual.
2. Connect the BT antenna to the designated port on the EUT. The port can be identified by referring to the “VIEW OF EUT(PORT)” section in the user manual.
3. Power on the EUT by following the instructions provided in the user manual. Use any power buttons or switches mentioned in the “INTERNAL VIEW OF EUT-X” sections.
4. Once the EUT is powered on, it should establish a connection with the BT antenna. Ensure that the BT antenna is within range and properly positioned for optimal signal strength.
5. Refer to any additional instructions or features mentioned in the user manual for specific usage guidelines or troubleshooting tips.

For any further assistance or inquiries, refer to the complete user manual or contact our customer support.

INTERNAL PHOTOS

VIEW OF EUT(PORT)

OPEN VIEW OF EUT

VIEW OF BATTERY

INTERNAL VIEW OF EUT-1

INTERNAL VIEW OF EUT-2

INTERNAL VIEW OF EUT-3

INTERNAL VIEW OF EUT-4

INTERNAL VIEW OF EUT-5

INTERNAL VIEW OF EUT-6

Any report having not been signed by authorized approver, or having been altered without authorization, or having not been stamped by the “Dedicated Testing/Inspection Stamp” is deemed to be invalid. Copying or excerpting portion of, or altering the content of the report is not permitted without the written authorization of AGC. The test results presented in the report apply only to the tested sample. Any objections to report issued by AGC should be submitted to AGC within 15days after the issuance of the test report. Further enquiry of validity or verification of the test report should be addressed to AGC by [email protected].

Contact

• Attestation of Global Compliance(Shenzhen)Co., Ltd
• Attestation of Global Compliance(Shenzhen)Std & Tech Co., Ltd
• Tel: +86-755 2523 4088
• E-mail: [email protected]
• Web: http://www.agccert.com/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>