AGC lighting ST36 LED Street Light Instruction Manual

June 4, 2024
AGC lighting

AGC logo

LED Street Light
Instruction Instructions

AGC lighting ST36 LED Street Light

AGC lighting ST36 LED Street Light - 2

Photocell

AGC lighting ST36 LED Street Light - 3

Note: If the luminaire use 5 pin or 7-pin NEMA socket, it needs to add a waterproof gasket between the socket and photocell control.

Rated Voltage 120-277VAC Turn-Off Level / Time-Delay 60Lx / 2-15s
Applicable Voltage Range 105-305VAC Ambient Temp. -40°C- +70°C
Rated Frequency 50/60Hz Related Humidity 99%
Rated Loading 1000W Tungsten, 1800VA Ballast Service Life 5000 times
Power Consumption 1.0VA Overall Size 84(Dia.) x 66mm
Turn-On Level / Time-Delay 10Lx / 15-120s Weight Approx. 88g

AGC lighting ST36 LED Street Light - 4

Maintenance (How to open it)

AGC lighting ST36 LED Street Light - 5

AGC lighting ST36 LED Street Light - 6

AGC lighting ST36 LED Street Light - 7

Warning

  1. To avoid damage, falling, electric shock or fire, please do not modify the lamp or replace accessories without confirming with the supplier first.
  2. Please authorize only qualified personnel to install the lamp and ensure they follow the instruction manual. Any improper installation might cause falling, electric shock, fire, or another injury, damage, or hazard.
  3. Please disconnect power before installation or any maintenance of the lamp.
  4. Please disconnect power if it begins to smoke or emit odors, since fire or electric shock may occur. Ask a qualified person to inspect and maintain the luminaire.
  5. Please do not dismantle the lamp without the supplier’s authorization.
  6. Please do not touch the power supply when the lamp is operating.
  7. If the external flexible cable or cord of the luminaire is damaged, it should only be replaced by the supplier, a service agent or a qualified person.
  8. Terminal block not included. The electrical fitting must be installed by a licensed electrician
  9. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.
  10. Only to be installed outside arms reach.
  11. For use in environments where an accumulation of non-conductive dust on the luminaire may be expected.
  12. Mounting heights of lights not higher than 30m.

**** Caution risk of electric shock

  • For type Y attachments: if the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
  • The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals