AGC MLT-EXAG-K Hexagon Bt Controller User Manual
- June 12, 2024
- AGC
Table of Contents
AGC MLT-EXAG-K Hexagon Bt Controller
Product Information
- Product: EUT (Equipment Under Test)
- Report No.: AGC08184230301AP03
Internal Photos
-
Open view of EUT (Figure 1)
-
Battery view of EUT (Figure 1)
-
Antenna close-up photo-1 BT Antenna
-
Internal view of EUT (Figure 1)
-
Internal view of EUT (Figure 2)
-
Internal view of EUT (Figure 3)
-
Internal view of EUT (Figure 4)
-
Internal view of EUT (Figure 5)
Note: This report provides internal photos and views of the Equipment Under Test (EUT).
Product Usage Instructions
- Ensure the EUT is powered off before opening.
- To open the EUT, refer to the open view photo in Figure 1 for guidance.
- If necessary, replace the battery by following the battery view photo in Figure 1.
- For a close-up view of the BT Antenna, refer to the photo-1 in Figure 2.
- To gain an internal view of the EUT, refer to the photos in Figures 1, 2, 3, 4, and 5.
- Handle the EUT with care and avoid damaging any internal components.
- Refer to the user manual for further instructions on using the EUT.
Any report having not been signed by authorized approver, or having been
altered without authorization, or having not been stamped by the “Dedicated
Testing/Inspection Stamp” is deemed to be invalid. Copying or excerpting
portion of, or altering the content of the report is not permitted without the
written authorization of AGC. The test results presented in the report apply
only to the tested sample. Any objections to report issued by AGC should be
submitted to AGC within 15days after the issuance of the test ref Further
enquiry of validity or verification of the test report should be addressed to
AGC by agc01@agccert.com.
Attestation of Global Compliance(Shenzhen)Co., Ltd
Attestation of Global Compliance(Shenzhen)Std & Tech Co., Ltd
- Tel: +86-755 2523 4088
- E-mail: agc@agccert.com
- Web: http://www.agccert.com/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>