PIONEER TS-A25S4 Single VC 1200W Woofer User Manual
- June 12, 2024
- Pioneer
Table of Contents
PIONEER TS-A25S4 Single VC 1200W Woofer
DESCRIPTION
The Pioneer TS-A25S4 is a single voice coil woofer with a 1200W power rating that has been intended to produce robust and penetrating bass performance in automobile audio systems. This woofer is able to withstand high power levels, since it has a maximum power handling of 1200 watts. It also produces forceful bass notes, which contribute to an immersive audio experience. Due to the design of its single voice coil, it is possible to simplify the wiring and installation processes, making it appropriate for both experienced car audio enthusiasts and do-it-yourself installs. The Pioneer TS-A25S4 subwoofer is constructed out of long-lasting materials to ensure that it is able to resist the rigorous conditions of in-vehicle use and deliver a performance that is reliable and constant over time.
SPECIFICATIONS
- Brand: PIONEER
- Speaker Type: Subwoofer
- Connectivity Technology: Coaxial
- Product Dimensions: 11.3 x 11.2 x 6.5 inches
- Item Weight: 2 pounds
- Item model number: TSA25S4
- Speakers Maximum Output Power: 1200 Watts
WHAT’S IN THE BOX
- Single VC 1200W Woofer
- User Manual
FEATURES
The Pioneer TS-A25S4 Single VC 1200W Woofer is equipped with a number of characteristics that were developed with the intention of delivering robust and high-quality bass performance in-car audio systems.
The following is a list of its most important characteristics:
-
Strong Low-Frequency Driver:
Impressive bass output can be obtained from the TS-A25S4, which features a woofer with a diameter of 12 inches and the capacity to manage a maximum power of 1200 watts. -
Single Voice Coil (SVC) Design:
The woofer has a single voice coil, which makes the process of installation and wiring much more straightforward. -
Durable Construction:
Long-lasting performance is ensured by the fact that the TS-A25S4 is constructed out of long-lasting materials that are designed to endure the rigors of in-vehicle operation. -
Cone Structure That Is Perfectly Optimized:
The design developed by Pioneer has a cone construction that has been tuned for better rigidity and reduced distortion. This results in bass reproduction that is both clear and accurate. -
Frequency Response That Is Extended:
The woofer has a frequency response that is extended, which enables it to reproduce a broad spectrum of bass notes that are low in frequency. -
4-Ohm Impedance:
Because of its 4-ohm impedance, this head unit can be compatible with a wide variety of automobile audio amplifiers. -
Sensitivity:
The woofer’s great sensitivity allows it to transfer power into sound in an effective manner, resulting in a bass output that is both powerful and audible. -
Flexibility in the Mounting:
Because of the way the woofer was designed, it can be mounted in a variety of ways, making it flexible enough to meet a variety of different requirements during installation. -
Perfect for Enclosures That Are Ported Or Sealed:
Because it performs equally well in sealed and ported enclosures, the TS-A25S4 gives designers more freedom in the layout of their automobile audio systems. -
Voice Coil That Is Resistant to Heat:
Because it has a voice coil that can withstand high temperatures, the woofer can continue to deliver excellent sound even after being used for an extended period of time. -
Nominal Power Handling:
The TS-A25S4 has a rating for its nominal power handling that indicates the maximum amount of continuous power it can manage before it begins to overheat. -
Spectrum of Frequencies:
The frequency range of the woofer is an indication of the low-frequency response that it is able to generate. -
Conveniently Sized:
Despite its robust performance, the TS-A25S4 features a compact design that makes it simple to install in a variety of vehicle configurations. -
Improved Impact on the Bass:
The engineering of Pioneer seeks to create a bass that is both deep and impactful, with the goal of improving the listening experience as a whole. -
Materials of an Extremely High Quality:
The components of the woofer are manufactured using high-quality materials, which guarantees their dependability and maintains their performance consistency. -
Simple and quick assembly:
Because it is intended to be installed easily, the TS-A25S4 is suited for use in car audio installations carried out by both seasoned car audio enthusiasts and do-it-yourselfers. -
Amplifiers made by Pioneer are compatible with the following:
When combined with Pioneer car audio amplifiers, the performance of the woofer is significantly enhanced. -
Sleek Design:
The appearance of the automobile audio system as a whole is improved by the contemporary and streamlined design of the woofer, which is included in it. -
Innovative Technology:
In order to produce higher sound quality and performance, Pioneer includes a number of cutting-edge technology in the construction of their woofers. -
Reputable Manufacturer:
Pioneer is a well-known and respected name in the automotive audio market. Pioneer is known for delivering audio devices that are of high quality and can be relied upon.
CONNECTION
You will need the following items in order to connect the Pioneer TS-A25S4 Single VC 1200W Woofer to the audio system in your vehicle:
- Pioneer TS-A25S4 Woofer
- Amplifier for in-car audio systems, ideally with the right power rating and impedance matching.
- A wiring kit for the amplifier that contains power wire, ground wire, wire for the remote turn-on switch, and RCA cables.
- Subwoofer housing or box can be either sealed or ported, according to your personal preference.
- Connectors for wiring, crimping tools, and electrical tape are included.
- screwdriver in addition to any other instruments required for mounting the amplifier and woofer.
The following is an in-depth guide that will walk you through each step of connecting the Pioneer TS-A25S4 Woofer to your car audio system:
-
Pick the Subwoofer Box That Best Suits You:
Choose a box or enclosure for the TS-A25S4 woofer that is appropriate for use with a subwoofer. Because the style of the box (sealed or ported) will have an effect on the bass response, you should select one that takes into account both your personal preferences and the amount of space that is available in the car. -
The Woofer should be mounted:
In the subwoofer enclosure, install the Pioneer TS-A25S4 woofer. For the best possible acoustic performance, check that it is suitably positioned and that it has been mounted firmly. -
Connecting the Woofer:
- Connect the TS-A25S4’s single voice coil (SVC) to the amplifier in your vehicle’s audio system. How to do it:
- Attach a positive (+) and a negative (-) speaker wire to the corresponding terminals on the voice coil of the woofer by running them from the speaker output terminals of the amplifier to the woofer.
- Attach the speaker wires to the terminals of the woofer in a safe and secure manner by using the required wiring connections.
-
Join the Amplifier Together:
Install the car audio amplifier by first following the wiring instructions provided with the amplifier, and then using the wire kit that came with the amplifier to connect it to the car’s battery and the audio head unit. -
Put the amplifier on the ground:
To properly construct a ground connection, you must first connect the ground wire of the amplifier to a spot on the chassis of the vehicle that is clean and bare metal. -
Make the Connection to the Wire for the Remote Turn-On:
Connect the wire for the remote turn-on feature of the amplifier to the appropriate wire on the audio head unit of your vehicle or any other source of a remote turn-on signal. When power is supplied to the audio system, a signal is sent through this wire to the amplifier, telling it to begin operating. -
Join the RCA Cables Together:
Connect the RCA wires that come from the audio head unit’s preamp outputs to the RCA input jacks on the amplifier. This is only necessary if your amplifier supports RCA input connections. -
Adjusting the Settings:
Adjust the gain, bass boost, and crossover parameters on the amplifier so that they correspond to the requirements of the TS-A25S4 woofer as well as your personal preferences about the sound. -
Put the System to the Test:
Turn on the car audio system, and make sure the Pioneer TS-A25S4 woofer is working properly by putting it through its paces to see whether it can give the level of bass output you require. -
Protect Every Single Wire:
After ensuring that everything is functioning properly, you should make sure that all of the wiring is tidily fastened and insulated using electrical tape or a wire loom so that there is no chance of interference or mishaps.
PRECAUTIONS
It is absolutely necessary to take the necessary precautions in order to ensure the correct operation, safety, and longevity of the Pioneer TS-A25S4 Single VC 1200W Woofer.
These precautions are as follows:
-
Rating for Power:
Make sure that the power output of the amplifier that is driving the TS-A25S4 woofer is either equal to or does not exceed the power handling capacity of the woofer. When the woofer is overpowered, it can cause harm or distortion to the sound. -
Matching of Impedance:
Check to see if the impedance of the amplifier is compatible with the impedance of the TS-A25S4 (which is 4 ohms). Impedance that is not properly matched can have a negative impact on performance as well as cause damage to the amplifier or woofer. -
Proper Enclosure:
You should make use of a suitable subwoofer box that is either sealed or ported and that is built to fulfill the requirements of the TS-A25S4 woofer. An improper enclosure can have a detrimental effect on the sound quality as well as cause mechanical problems. -
Adjustments to the Amplifier:
To prevent distortion and protect the woofer from any damage, make sure the gain, bass boost, and crossover settings on the amplifier are correctly adjusted. When tuning the system, make sure to follow the instructions provided by the manufacturer. -
Wiring:
When connecting the TS-A25S4 to the amplifier, make sure to use speaker wires of high quality and the necessary connections. Wires of an inadequate size or quality should be avoided wherever possible because they can result in a loss of power and reduce performance. -
Mounting That Is Safe:
It is important to make sure that the TS-A25S4 woofer is mounted in the subwoofer box in such a way that it cannot move around or rattle while the subwoofer is in use because this could result in mechanical damage. -
Grounding of the Amplifier:
To avoid problems with ground loops and electrical interference, make sure that the amplifier is correctly grounded to a spot on the chassis of the vehicle that is clean and bare metal. -
Connection for Remote Turn-On of Appliances:
If you want to avoid problems with the powering up and turning off of the amplifier, connect the cable that controls the remote turn-on to a dependable source. -
Take Care Not to Get Too Hot:
It is best to keep the woofer from being driven at high volumes for lengthy periods of time, as this might cause it to overheat and perhaps become damaged. After prolonged use, you should let the woofer reach its normal operating temperature. -
Bass Boost Usage:
Caution should be used when utilizing the bass boost feature on the amplifier. An excessive amount of bass boost might result in distortion and cause the woofer to wear out faster than it should. -
The Protection of the Environment:
It is important not to subject the TS-A25S4 woofer to conditions that could compromise its performance or shorten its lifespan, such as severe temperatures, moisture, or direct sunlight. -
Avoid Inflicting Physical Harm:
Protect the woofer against any kind of physical impact or anything that could potentially pierce the cone, as this can cause damage that cannot be repaired. -
Regular Maintenance:
Perform routine checks on the TS-A25S4 to look for any evidence of damage, frayed connections, or wear and tear. To keep the woofer and enclosure operating at their peak levels, perform any necessary cleaning. -
Safe Driving:
Make sure that the location of the subwoofer box does not interfere with your ability to drive safely or the operation of any safety measures that are built into the car. -
Professional Installation:
If you are unsure about the process of installation, you should seek the assistance of a professional car audio installer to ensure the correct configuration and tuning of the system.
FREQUENTLY ASKED QUESTIONS
What is the Pioneer TS-A25S4 Single VC 1200W Woofer?
The Pioneer TS-A25S4 is a car audio subwoofer designed to deliver powerful and deep bass performance.
What size is the TS-A25S4 woofer?
The TS-A25S4 is a 12-inch woofer.
What is the power handling capacity of the TS-A25S4?
The TS-A25S4 has a maximum power handling of 1200 watts.
What type of voice coil does the TS-A25S4 have?
The TS-A25S4 features a single voice coil (SVC) design.
What is the impedance of the TS-A25S4 woofer?
The TS-A25S4 has an impedance of 4 ohms.
Does the TS-A25S4 require an amplifier?
Yes, the TS-A25S4 requires an external amplifier to power the subwoofer.
What type of enclosure is recommended for the TS-A25S4?
Both sealed and ported enclosures can be used with the TS-A25S4, depending on your preferences and desired bass response.
What is the frequency response range of the TS-A25S4?
The frequency response range indicates the low-frequency range that the TS- A25S4 can reproduce. Check the product specifications for this information.
Can the TS-A25S4 be used in a car audio system?
Yes, the TS-A25S4 is specifically designed for car audio applications.
What is the sensitivity rating of the TS-A25S4?
The sensitivity rating measures how efficiently the TS-A25S4 converts power into sound. Check the product specifications for this information.
Can the TS-A25S4 be used in other applications besides car audio?
The TS-A25S4 is primarily designed for car audio use, but it may be suitable for other audio setups if the specifications match the requirements.
What materials is the TS-A25S4 woofer made of?
The TS-A25S4 is constructed with high-quality and durable materials to withstand the demands of in-vehicle use.
Is the TS-A25S4 compatible with aftermarket head units?
Yes, the TS-A25S4 is compatible with most aftermarket car audio head units.
Can the TS-A25S4 be used with other Pioneer audio components?
Yes, the TS-A25S4 can be paired with other Pioneer car audio components, such as amplifiers and speakers.
What is the recommended amplifier power for the TS-A25S4?
The recommended amplifier power should match the TS-A25S4's power handling capacity for optimal performance.