YHDC TST024L Split Core Current Transmitter Instruction Manual
- June 12, 2024
- YHDC
Table of Contents
YHDC TST024L Split Core Current Transmitter
Product Information
Spliscore, suspension installation, output with cable. DetectAC current. High insulation between primary and secondary circuits.
- Product Name: TST024L Split Core Current Transmitter
- Features:
- Split core suspension installation
- Output with cable
- Detects AC current
- High insulation between primary and secondary circuits
- Electrical Parameters:
| Input Rating | Output | Power Supply | Response Time | Weight |
|---|---|---|---|---|
| 100A, 200A, 300A | 0-20mA/4-20mA/0-5V/1-5V/0-10V | +12V / +24V | 200mS | 196g |
Product Features
- Lightweight
- Low power consumption
- Good linearity
- No insertion loss
- Fast response time
- Good anti-interference ability
Product application
- Railway
- Metallurgical
- Welding machine
- Robot
- Motor
- Inverter power supply
- Variable frequency governor
- Uninterrupted power supply and communication power supply
Installation diagram
- Loosen the card buckle
- Open up
- In the lead
- Fasten card buckle
Electrical parameters
Instruction for use
- Connect the wires correctly according to the marked connection mode
- With hole measurement, response time and following the speed for the best
- Faulty wiring can lead to product damage and output uncertainty
Safe operation:
- Please read this specification carefully before use.
- When you need to move the product, please be sure to disconnect the power and all the connected cables.
- If found shell, devices attached to the fixed parts, wire, or have any damaged, please immediately deal with hidden dangers.
- If there is any doubt about the safe operation of the equipment, the equipment and the corresponding accessories should be closed immediately, and the fastest time for troubleshooting.
Proclamations
As our products are constantly being improved and updated, we reserve the
right to modify the content of this specification at any time without prior
notice.
Dimensions
Wiring diagram
- The auxiliary power supply with ripple small (≤10mV) is selected
- Switch on auxiliary power
- Auxiliary power is connected to the transmitter
- Transmitter detects the primary current
Read User Manual Online (PDF format)
Loading......