BRESSER 7004030 CO2 Air Quality Monitor Smile XXL Instruction Manual

: June 12, 2024
: BRESSER

Table of Contents

BRESSER 7004030 CO2 Air Quality Monitor Smile XXL
Product Information
Product Usage Instructions
GENERAL WARNINGS
EC DECLARATION OF CONFORMITY
TECHNICAL DATA
CO² LEVEL
CLEANING AND MAINTENANCE
DISPOSAL
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BRESSER 7004030 CO2 Air Quality Monitor Smile XXL

Product Information

Product Name: CO2 Air Quality Monitor Smile XXL
Article Number: 7004030
Power Supply: AC/DC power adapter

Technical Specifications:

Response Time: Within 10 seconds of any change in CO2
Carbon Dioxide Measurement Range: 0 – 9999 PPM
Accuracy: 1 PPM
Temperature Resolution: Not specified
Temperature Accuracy: Not specified
Humidity Measuring Range: 0 to 99.9% RH
Humidity Resolution: 0.1%
Humidity Accuracy: Not specified
Work Condition: Not specified
Storage Condition: Not specified
Dimensions: 388x288x43 mm
Weight: 1.435 kg

Product Usage Instructions

Connect the AC/DC power adapter to the DC Anschlussbuchse (DC connection socket) located at the back of the device.
Mount the CO2 Air Quality Monitor on a wall using the provided wall mounting screws.
Press the MODE button to set the carbon dioxide concentration alarm value. Use the Increase and Decrease buttons to adjust the alarm value as desired
The graphical display on the front of the device shows the current CO2 level. The display will indicate whether the air quality is Poor (1200-9999PPM), Good (600-1100PPM), or Excellent (0-500PPM).
The PPM Value displayed on the front of the device represents the concentration of carbon dioxide in the ambient air, measured in parts per million.
Use the MODE button to switch between Celsius and Fahrenheit temperature units.

Note: For detailed instructions, please refer to the Bedienungsanleitung (Instruction Manual) available for download at www.bresser.de/P7004030.

GENERAL WARNINGS

RISK OF CHOKING!
Keep packaging material, like plastic bags and rub-ber bands, out of the reach of children, as these ma-terials pose a choking hazard.

RISK of ELECTRIC SHOCK!
This device contains electronic components that operate via a power source (ac adaptor). Only use the device as described in the manual; otherwise, you run the risk of an electric shock.

RISK of FIRE/EXPLOSION!
Do not expose the device to high temperatures. Excessive heat or improper handling could trigger a short-circuit, a fire or an explosion.

RISK of property damage!
Do not disassemble the device. In the event of a de-fect, please contact your dealer. The dealer will con-tact the Service Centre and can send the device in to be repaired, if necessary.

EC DECLARATION OF CONFORMITY

Hereby, Bresser GmbH declares that the equipment type with part number: 7004030 is in compliance with Directive: 2014/30/EU and 2014/35/EU. The full text of the EU declaration of conformity is available at the following internet address: www.bresser.de/download/7004030/CE/7004030_CE.pdf

UKCA Declaration of Conformity
Bresser GmbH has issued a „Declaration of Conformity“ in accordance with applicable guidelines and corresponding standards. The full text of the UKCA declaration of conformity is available at the following internet address: www.bresser.de/download/7004030/UKCA/7004030_UKCA.pdf
Bresser UK Ltd. • Suite 3G, Eden House, Enterprise Way, Edenbridge, Kent TN8 6HF, Great Britain

MANUAL DOWNLOAD:

www.bresser.de/P7004030

SCOPE OF DELIVERY

TECHNICAL DATA

Power supply	AC/DC power adapter DC 9V 2000 mA
Response Time	Within 10 seconds of any change in CO2
Carbon dioxide measurement range	0 – 9999 PPM
Accuracy	± 70 PPM ±3% readings
Resolution	1 PPM
Temperature measuring range	-10° to +100°C
Temperature resolution	0.1°C
Temperature accuracy	±0.3°C
Humidity measuring range	0 to 99.9% RH
Humidity resolution	0.1%
Humidity accuracy	±3%
Work condition	0 – 50° C (0 – 90% RH)
Storage condition	-30 – 70° C (0 – 90% RH)
Dimensions	388x288x43 mm
Weight	1.435 kg

FRON

Graphical display of current CO2 level.
PPM Value. PPM stands for “parts per million” and shows the concentration of carbon dioxide in the ambient air.
Temperature
Humidity

BACK

MODE button
Set carbon dioxide concentration alarm value
button
Increase the alarm value
button
Decrease the alarm value
button
Alarm on/off
°C/°F button Switch Celsius/Fahrenheit
Horizontal wall mounting holes
Vertical wall mounting holes
DC power interface

CO² LEVEL

CO² level	Status	Description
250 – 350ppm	Outside	Normal outdoor air level.
350–1000ppm	Well ventilated, Ideal	Typical level indoors with good

ventilation. 1000 ppm = Recommended maximum level in a closed room. Con- sidered maximum comfort level in many countries.
1000–1200ppm| Under ventilated| Poor air quality – requires ventilation. General drowsiness, discomfort and odors.
1200–2000ppm| Very under ventilated| Fatigue and sleepiness may set in. Intensify ventilation measures!
2000–5000ppm| Very poorly ventilated| Danger! You may experience severe headaches, vomit- ing/nausea, and dizziness within 20 minutes.
above 5000ppm| Totally unacceptable| Danger! Headache and dizziness in 5 to 10 minutes. Increased risk for health damage by prolonged exposure.

WALL MOUNT
Use the wall plugs and wall mounting screws to attach the device to your wall in horizontal or vertical position.

CHARGING / START-UP
Insert the DC connector into the connection socket (8) of the device. Insert the mains plug into the power outlet. The device is energized directly and begins preheating. The LCD displays a countdown of 7 sec-onds. The buttons are not operational during this time. Once the countdown is finished the device enters the normal measurement state.

SETTINGS MODE
Press the MODE button to enter the carbon dioxide alarm settings mode. Press or to choose the PPM value when the alarm should start. Press the MODE button to confirm and exit the settings mode. The default alarm value is 1200 PPM.

CARBON DIOXIDE ALARM
Press the Alarm button to activate or deactivate the carbon dioxide alarm. When you hear a small beep sound, then the alarm is activated. The alarm will sound once the concentration of carbon dioxide reach-es the alarm value. Press the alarm button again during an active alarm to deactivate the alarm sound.

CLEANING AND MAINTENANCE

Before cleaning the device, disconnect it from the power supply (disconnect power adapter)! Only use a dry cloth to clean the exterior of the device. To avoid damaging the electronics, do not use any cleaning fluid.

DISPOSAL

Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal.
Do not dispose of electronic devices in the household garbage! As per Directive 2002/96/EC of the European Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner.

WARRANTY

The regular warranty period is 2 years and begins on the day of purchase. To benefit from an extended voluntary warranty period as stated on the gift box, registration on our website is required.
You can consult the full warranty terms as well as information on extending the warranty period and de-tails of our services at www.bresser.de/warranty_terms.

Please contact the service centre first for any questions regarding the product or claims, preferably by e-mail.
E-Mail : service@bresseruk.com
**Telephone*** : +44 1342 837 098

BRESSER UK Ltd.
Suite 3G, Eden House
Enterprise Way
Edenbridge, Kent TN8 6HF
United Kingdom
*Number charged at local rates in the UK (the amount you will be charged per phone call will depend on the tariff of your phone provider); calls from abroad will involve higher costs.