NEXT-SHINE B0C9ZVX3YD Digital Pocket Scale User Manual
- June 15, 2024
- NEXT-SHINE
Table of Contents
NEXT-SHINE B0C9ZVX3YD Digital Pocket Scale
Product Information
Specifications
- Charging Method: USB charging
- Unit Modes: gn, oz, ozt, dwt, ct, lb, tl, ml, g
- Display: Backlight display
- Power State: Power on
- Stability Indicator: HOLD key
- Country of Origin: China
Product Usage Instructions
Charging
- Plug in the charger to the electronic scale.
- The battery symbol on the scale will start flashing, indicating normal charging.
- Once the battery is fully charged, the flashing of the battery symbol will stop.
- Pull out the charging head to complete the charging process.
Backlight Display
In the power on state, click the [LIGHT] key to turn on or off the
backlight display.
HOLD Function
In the power on weighing state:
- After weighing an item and obtaining a stable value, you can click the [HOLD] key.
- The value will be locked and remain even if the item is removed.
- Click the [HOLD] key again to return to zero.
Unit Conversion
- Short press the [UNIT] key to select the unit conversion.
- There are 9 unit modes to choose from, including gn, oz, ozt,dwt, ct, lb, tl, ml, and g.
Zeroing and Weighing
- Clear the number on the display screen.
- Put a tray or container on the scale platform.
- Press the [ZERO] key.
- The display screen will show 0.00 or 0.0 0.
- Put the required items into the container or tray to weigh.
- Read the accurate weight of the items from the display screen.
Frequently Asked Questions (FAQ)
Q: How should I ensure accurate weighing?
A: Make sure your scale is on a stable horizontal surface free of
vibration.
Q: Where is this product manufactured?
A: This product is made in China.
Made in China
Make sure your scale is on a stable horizontal surface free of vibration.
This product should be used on a horizontal plane without vibration.
Functions
- Power – On/Off
- UNIT – Units Conversion
- ZERO – Tare Weight
- PCS – Counting Features
- CAL – Calibration
- OFF TIMER – Confirm selection / OK
- Hold – Hold the data on the display
- LIGHT – Screen backlight
Operation
-
ON/OFF:
Short press the [ON/OFF] power button to turn on the machine, and the display shows “188888”, and then return to the zero position “0.00” or “0.0”. The machine can be used normally. Automatic shutdown and manual shutdown settings are as follows:
In the power on state, long press the [ZERO] key until display 60, and then press the [UNIT] key to select 60/120/180 or 0 second as for automatic shutdown timer. 0 second is no time control and requires manual shutdown. After selecting the required shutdown time, press [OFF TIMER] to display PASS confirmation. -
UNIT
Short press the [UNIT] key to select the unit conversion. There are 9 unit modes to choose, including gn, oz, ozt, dwt, ct, lb, tl, ml and g. -
ZERO
Clear the number on the display screen, or put a tray or container on the scale platform, press the [ZERO] key, the display screen will display “0.00” or “0.0” “0”, and then put the required items into the container or tray to weigh, and then you can get the accurate weight of the items. -
PCS
The premise of using the counting function: the weight of each article to be counted must be the same.
As described above, in the power on weighing state, long press the [PCS] key, and the display shows the sampling value of 25, and then continue to press the [UNIT] key to switch to the required sampling value, which has 25, 50, 75, -
Then put the same amount of samples on the scale platform according to the selected value, and then press the [OFF TIMER] key to complete sampling, and then start counting. Put the items to be counted on the scale platform, and the display shows the specific quantity of items, during the counting process, press the [PCS] key briefly, and the content of the display screen will switch between weighing and counting, so that the weight can be obtained while the quantity is obtained.
Note: the counting function can be realized by putting the items to be sampled on the scale platform before operation, or selecting the sampling data before putting the items on the scale platform for operation. -
CAL
This product has been calibrated before leaving the factory. If this product cannot be weighed normally or the scale is inaccurate, please re-calibrate it in time. There are 100g or 50g calibration weights randomly available to calibrate this machine. (For high accuracy, please choose the maximum weight calibration of this machine. )
Power off state, long press the [CAL] key 2s and then press the [ON/OFF] at the same time until 50g appears on the display screen, continue to press the [CAL] key to select the weight of the calibration weight, and then press the [OFF TIMER] key to confirm. The calibration value of the display screen is flashing. Put the weight with the corresponding weight value on the scale platform, and the automatic calibration display PASS shows that the calibration is completed. The product returns to the normal weighing state, and the weight is taken down for normal use after the calibration is completed.
Charging Version – USB charging:
When the charger is plugged in, the battery symbol on the electronic scale keeps flashing, indicating normal charging. After being fully charged, the battery symbol does not flash, and the charging is completed by pulling out the charging head. -
LIGHT
In the power on state, click the [LIGHT] key to turn on or off the backlight display. -
HOLD
In the power on weighing state, the value is stable after weighing, you can click the [HOLD] key, the value will be locked and remain even the item is removed. Click the [HOLD] key again to return to zero. -
Common Troubleshooting
- The main reasons for inaccurate weighing and failure are: the battery power is too low, there is no correct correction, the weighed items exceed the maximum range of this product or are not operated on the plane, etc.
- [DISPLAY] – indicates error removal.
- [OUT2] – need to be re-calibrated.
- [EEEE] – overweight, you should remove the overweight items immediately.
- [UN2T] – it is unbalanced, so it is necessary to use this product on a horizontal surface.
- [LO] – the battery is low, please replace the battery.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>