LITHEAUDIO V2 Wifi Calling Speaker Instruction Manual

: June 4, 2024
: LITHEAUDIO

LITHEAUDIO V2 Wifi Calling Speaker

IMPORTANT SAFETY WARNING

BEFORE USE PLEASE READ COMPLETELY AND USE THE PRODUCT IN ACCORDANCE WITH THESE SAFETY INSTRUCTIONS.

Before commencing any electrical work ensure the supply is switched OFF at the mains. Either by switching off the consumer unit or by removing the appropriate fuse. This product should be installed in accordance with the relevant sections of the building regulations code and in accordance with the latest edition of IEE regulations (BS 7671).
If the unit is to be used as a replacement for an existing product, remove the existing unit from its location and disconnect the wiring. Connect the wires as shown in the diagram. Ensure terminals are properly tightened and ensure no bare wires are visible. When fitting the speaker into the ceiling, ensure no wires are trapped.

READ THE INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION PROCESS AND KEEP THEM SAFE FOR FUTURE REFERENCE.

Failure to follow the instructions in this guide voids all warranties on your speakers.
Warning: Do not use the product in water.
Warning: Do not install speaker directly above any heat sources such as radiators, or other apparatus that produce heat.
Warning: To reduce the risk of fire or electric shock, do not expose this speaker to rain or moisture (directly above the bath or shower area) or in Bathroom Zone 0 or Zone 1.
Protect the power cable from being damaged, do not over-stretch the cable.
Only use attachments/accessories specified by the manufacturer Lithe Audio.
Turn off the power to the speaker when unused for long periods of time.
A Fire and Acoustic speaker hood must be used in accordance with UK building and IEE Regulations with a fire rating of up to 60 minutes and is Parts B, L, C, and E compliant.
Do not open the back cover to the speaker as this protects the PCB which will invalidate the warranty and could cause electric shock.
Ensure speaker location is free from obstructions such as electrical conduit, HVAC ducts, or Water lines.

USA REGULATIONS

BEFORE USE PLEASE READ COMPLETELY AND USE THE PRODUCT IN ACCORDANCE WITH THESE SAFETY INSTRUCTIONS.
The Power adaptor (supplied) should not be placed in a dead space such as a wall or ceiling. In accordance with US National Electrical Code. A DC extension cable must be used in conjunction with the power adaptor supplied and placed inside / on top of a cabinet or anywhere where you have accessibility. (Each situation is unique to the installation, consult your local building codes or contact Authorized Dealer or Installer) If the unit is to be used as a replacement for an existing product, remove the existing unit from its location and disconnect the wiring. Connect the wires as shown in the diagram. Ensure terminals are properly tightened and ensure no bare wires are visible. When fitting the speaker into the ceiling, ensure no wires are trapped.

READ THE INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION PROCESS AND KEEP THEM SAFE FOR FUTURE REFERENCE.

Failure to follow the instructions in this guide voids all warranties on your speakers.
Warning: Do not use the product in water.
Warning: Do not install speaker directly above any heat sources such as radiators, or other apparatus that produce heat.
Protect the power cable from being damaged, do not overstretch the cable.
Only use attachments/accessories specified by the manufacturer Lithe Audio.
Turn off the power to the speaker when unused for long periods of time.
A Fire and Acoustic speaker hood must be used in accordance with UK building and IEE Regulations with a fire rating of up to 60 minutes and is Parts B, L, C and E compliant.
Do not open the back cover to the speaker as this protects the PCB which will invalidate the warranty and could cause electric shock.
Ensure speaker location is free from obstructions such as electrical conduit, HVAC ducts, or Water lines.

BOX CONTENTS

Please ensure you read the entire instruction manual carefully before you commence any work. Carefully unpack the speakers from the packaging. Please check to ensure all the parts shown below are included. If any parts of the speaker appear damaged, please contact your dealer/reseller immediately or contact www.Litheaudio.com for contact details.

$LITHEAUDIO-V2-Wifi-Calling-Speaker-fig $1$$

PREPARATION

$LITHEAUDIO-V2-Wifi-Calling-Speaker-fig $2$$

KNOW YOUR SPEAKER

The Lithe Audio LWF1V2 range of Wi-Fi ceiling wireless speakers has various inputs and outputs:

SPEAKER OUTPUT – To connect one additional passive (Slave) speaker (Gold Plated)
RCA INPUT – To connect directly from existing Hi-Fi equipment
POWER INPUT – To connect (as supplied) transformer

$LITHEAUDIO-V2-Wifi-Calling-Speaker-fig $3$$

In built-over voltage, under voltage, over temperature, and short circuit protection, if there is an electrical fault, the power supply to the amplifier will cut off automatically and restart when the speaker has stabilized.

SPEAKER PLACEMENT

IMPORTANT: BEFORE COMMENCING ANY WORK, DETERMINE YOUR PRIMARY LISTENING POSITION. IF YOU ARE UNSURE SEEK HELP FROM AN AV INSTALLER FOR OPTIMUM RESULTS.

2 SPEAKER PLACEMENT In an ideal scenario, the two speakers should be spaced equally apart from the primary listening position. Where possible, place the speakers approx 3″ / 1m from the wall

4 SPEAKER PLACEMENT Ideally, the two speakers to the front and two speakers to the rear should be spaced equally apart from the primary listening position to provide a balanced listening experience. Where possible, place the speakers approx 3″ / 1m from the wall.

NOTE: For optimal sound when using speakers in vaulted ceilings switch the environmental equalizer switch to +3dB, when using speakers in a tiled environment (Bathroom) switch the equalizer to -3dB.

INSTALLATION

IMPORTANT: BEFORE COMMENCING ANY ELECTRICAL WORK ENSURE THE SUPPLY IS SWITCHED OFF AT THE MAINS. IF YOU ARE UNSURE HOW TO FIT SEEK HELP FROM A PROFESSIONAL ELECTRICIAN / AV INSTALLER

Mark out the position of the speaker using a tape measure and mark using a pencil with the template supplied. Check using a stud finder to make sure no obstruction is present prior to cutting.
Drill a pilot hole and cut the speaker hole using a cutting saw. Take caution when cutting to keep fingers away from the cutting blade and wear protective eyewear.
Connect the power lead from the transformer (supplied) to a 13A mains plug socket or terminate to a dedicated 3A fused spur. Ensure the power lead is not overstretched.
Insert speaker into the ceiling then using a transformer (supplied) to a 13A mains plug screwdriver lock the 4 dog leg fixings to secure socket or terminate to a dedicated 3A fused spur. the speaker in place, do not over-tighten. Ensure the power lead is not overstretched. Attach the magnetic grille to the speaker front.

PAINTING THE SPEAKER GRILLE
Do not paint the speaker grilles whilst attached to the speaker. Lithe Audio recommends spraying painting using 5 parts thinning agent to 1-part paint. Spray thinly to ensure speaker cover grille holes are not blocked as this will affect the sound quality of the speakers.
INSTALLATIONS IN FIRE-RATED CEILINGS
If you plan to mount your speakers in a fire-rated ceiling, you should purchase a fire hood for the speaker. Visit www.litheaudio.com for more information and recommended hoods.

INSTALLATION USA

IMPORTANT: BEFORE COMMENCING ANY ELECTRICAL WORK ENSURE THE SUPPLY IS SWITCHED OFF AT THE MAINS. IF YOU ARE UNSURE HOW TO FIT SEEK HELP FROM A PROFESSIONAL ELECTRICIAN / AV INSTALLER

Mark out the position of the speaker using a tape measure and mark using a pencil with the template supplied. Check using a stud finder to make sure no obstruction is present prior to cutting.
Drill a pilot hole and cut the speaker hole using a cutting saw. Take caution when cutting to keep fingers away from the cutting blade and wear protective eyewear.
To meet the NEC code for this type on install, 4. Insert speaker into the ceiling then using a connect the DC extension cable to power adap- screwdriver lock the 4 dog leg fixings to secure tor and place power adapter inside/ on top of the speaker in place, do not over tighten. cabinet or anywhere you have easy access. Attach the magnetic grille to the speaker front.
Insert the speaker into the ceiling then using a screwdriver lock the 4 dog leg fixings to secure the speaker in place, do not over-tighten. Attach the magnetic grille to the speaker front.

PAINTING THE SPEAKER GRILLE
Do not paint the speaker grilles whilst attached to the speaker. Lithe Audio recommends spraying painting using 5 parts thinning agent to 1-part paint. Spray thinly to ensure speaker cover grille holes are not blocked as this will affect the sound quality of the speakers.
INSTALLATIONS IN FIRE-RATED CEILINGS
If you plan to mount your speakers in a fire-rated ceiling, you should purchase a fire hood for the speaker. Visit www.litheaudio.com for more information and recommended hoods.

YOUR HOME WI-FI NETWORK

To enable the Lithe Audio Wi-Fi ceiling speakers, your device must be on the same network.

Ensure your network has a high-speed internet connection, as the speakers are designed to provide you with free online software/firmware updates.
High-speed DSL / cable modem or fiber to the home broadband is recommended for the best possible playback of music services.
Lithe Audio communicates over a 2.4GHz & 5GHz Wi-Fi home network supporting 802.11 a, b, g, n, ac wireless technology only.
For larger homes where the Wi-Fi signal is not stable, we suggest adding access points/mesh networks to strengthen the network or updating your router to a higher specification model to suit the demand.

LITHE AUDIO APP

To enhance your listening experience download Lithe Audio app via the app store on your device and follow the setup procedures within this instruction manual.
The app will allow you to set up singular rooms, and groups of speakers, or play in Party Mode.
You can connect multiple speakers simultaneously and control them all from the app.

STATUS INDICATOR LIGHT

Located on the front face of the speaker, the LED Indicates the status of your speaker:

Red solid: Speaker booting up
Red quick flash (1s 4 times): Speaker under restart operation
Red slow flash (3s 1 time): Speaker under standby mode, waiting for user operation
Green solid: Speaker is active and connected to Wi-Fi
Blue Solid: Bluetooth speaker connected
Green slow flash(1s 1 time): Speaker trying to connect to the preconfigured Wi-Fi
Solid purple: Speaker under RCA mode
Green quick flash(1s 4 times): Speaker in WAC/SAC mode, user to configure Wi-Fi

CONNECTING TO BLUETOOTH

Open the setting menu and select Bluetooth
Turn on Bluetooth and search devices
Click Lithe Audio Speaker to connect and pair to the speaker.

SETUP FOR APPLE IOS

Ensure the Wi-Fi speaker is connected to the power supply and is turned on, The LED indicator light will be red.
Press and hold the `Connection Reset Button’ for 10 seconds & release, the LED indicator will flash Green fast and the speaker is now ready to connect to your Wi-Fi network.
Open the Wi-Fi setting menu on your phone or tablet
Select the new AirPlay speaker listed you would like to add to your network. The Lithe Audio Wi-Fi speaker setup is now complete, return to the Lithe Audio app
Select your network and change the `Speaker Name’ to something easily identifiable e.g. Kitchen and click Next

AirPlay

The image shows Apple iPhone but the visuals may change from device to device. Apple and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. To pay directly to the speaker(s) using iOS devices (iPad, iMac, iPhone, Apple TV, etc) you can connect via AirPlay. Please follow the steps below:

ENSURE THE SPEAKER IS CONNECTED TO THE POWER SUPPLY, AND THE WIFI NETWORK.

Note: When using AirPlay the Lithe app grouping and playback functions for multiple speakers become redundant. The ability to play any source is now possible. As well as playing with other brands in a multi-room environment.

Swipe down from the top right of the screen
Click on the right corner icon to show available AirPlay devices
The audio display screen shall show available devices to play music through as per the list
Select the speaker(s) to play music through open any app and play your music

Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. To control this AirPlayenabled speaker, iOS 11.4 or later is required. Apple, iPad, iPad Air, iPad Pro, iPhone, and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries.

SETUP FOR GOOGLE HOME

Download the Google Home app from the Google Play store
Ensure the Wi-Fi speaker is connected to the power supply and is turned on, The LED indicator light will be red.
When the LED indicator blinks green quickly press the + top left-hand corner, Click set up the device, choose a home to start looking for devices on your network, and choose Speaker, Next.
Open Google Home and click the + sign top left-hand corner
Click set up the device, New devices Setup new device
Select an existing home or create a new home to start looking for devices.
Select speaker, Next, click on Lithe Audio Speaker all set.

Chromecast built-in

To play directly to the speaker(s) using Google Cast. Please follow the steps below:
ENSURE THE SPEAKER IS CONNECTED TO THE POWER SUPPLY, AND THE WIFI NETWORK.

Note: When using Google Cast the Lithe app grouping and playback functions for multiple speakers become redundant. The ability to play any source is now possible. As well as playing with other brands with Google Cast built-in within a multi-room environment.

To group speakers, click +, create a speaker group
Click on the speakers you want to group, next, name the group
The audio display screen shall show available devices to play music through as per the list
Select the speaker to play music through and press play on your source player Google, and Chromecast built-in are trademarks of Google LLC.

SPOTIFY CONNECT

Use your phone, tablet, or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. The Spotify Software is subject to third-party licenses found here: www.spotify.com/connect/third-party-licenses.

HARD WIRED INPUT- RCA

To connect other devices such as CD players, BluRay players, etc) to play through the Wi-Fi speakers please follow the steps below:
RCA Connection: To play music via speaker RCA connection connect an RCA cable to the speaker and play through your device. Within the Lithe Audio App click on the source to activate RCA to be able to play through the speaker.

Note: To ensure the best possible sound without humming or noise, we recommend a shielded RCA cable be used.

CREATE STEREO PAIR

PLEASE NOTE: LWF1V2 DOES NOT INCLUDE PASSIVE SPEAKER
The Lithe Audio Master Wi-Fi ceiling speaker is able to connect to and power an additional passive speaker via the Right speaker output. Use wire cutters to strip the ends of the speaker cable (if required).

SPECIFICATIONS

SPEAKER

Sound Quality THD+N<0.009%, 55Hz-20kHz (+/- 3dB)
RMS Power: 60W RMS (2x 30W)
Impedance: 8 Ohms nominal
Sensitivity (1W/1m): 90dB
Line In Analog (RCA), auto-detecting
Type: Class D (Digital)
Audio Compression: 192kHz 24bit
Woofer: 6.5” Woven Glass Fiber cone / Polypropylene Cone (IP44)
Tweeter: 0.75” Titanium Cone

MUSIC ACCESS

Audio Formats Supported: MP3, WMA, AAC (MPEG4), AAC+, ALAC, FLAC, APE, WAV, OGG, LPCM
Audio Sample Rate: up to 192kHz 24bit
Music Services Supported by Lithe Audio include; Airable Radio, Podcast, Tidal, Deezer, Soundmachine, Amazon Music, Napster, Spotify, etc.
Operating Systems (for stored files) Windows XP SP3 and higher; Mac OS X 10.6.8 and higher; NAS (network attached storage) devices supporting CIFS

MULTI-ROOM

Group speakers within the same Wi-Fi network

WIRELESS NETWORKING

Wi-Fi Connectivity: Wi-Fi CERTIFIED 802.11 a, b, g, n, ac WPA – Personal WPA2 Personal WMM, Wi-Fi Protected Setup
Wireless connectivity works on your home Wi-Fi network with both 2.4GHz/5GHz broadcast routers
Internet connection is required for access to Internet radio stations, online music services, and software updates.

TROUBLESHOOTING

If a problem arises, please try the troubleshooting guide below. If the problem is not listed please contact Lithe Audio Customer Service Support

Q: Speaker has not been found during setup
A: Please check power cord is correctly connected to the speaker and transformer, Check the red light is ON. Press the reset button for 5 seconds on the speaker (discoverable mode), green light shall flash, follow the instructions for Android or AirPlay setup. Before commencing any electrical work ensure the supply is switched OFF at the mains.

Q: Speaker connected to AirPlay but not playing through the device
A: Please ensure device has good Wi-Fi strength and battery power, check the led indicator is solid green, if not press the reset button for 3 secs. Failing this, turn the speaker power off and then on.

Q: The device is connected to a Wi-Fi speaker but no sound
A: Ensure your device volume is NOT muted, increase the volume within the app, and try again. Restart the app which the audio is playing from and try again.

Q: Lithe Audio App not showing connected speakers
A: Ensure your speaker’s green light is on and connected as per setup. The app shall automatically find active speakers, if not, restart the app or press reset on the speaker for 3 secs to wake the speaker. to show green status light.

Q: Lithe Audio App not working correctly
A: Ensure your speaker firmware/app is up to date OR restart/reinstall the app fully.

Q: Can the speaker be installed on the bathroom ceiling?
A: The IP-rated models can be installed in zone 2 or 3 of a bathroom. Ensure you read the safety precautions before installation.
Warning: Do not use the product in water or directly above the bath or shower area.

Q: I have a new router and the speakers are not visible anymore
A: If you have purchased a new router or reset the router back to default, you shall need to install the speakers again. Please follow the setup procedures for IOS or Android. For further queries and support questions please visit www.support.litheaudio.com email us at support@litheaudio.com or via our website’s live chat service (during working hours)

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the FCC rules. these limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. however, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/tv technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (example- use only shielded interface cables when connecting to computer or peripheral devices).

FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

EUROPE Lithe Audio declares that this product herewith complies with the requirements of the EMC Directive 2004/108/EC, Low Voltage directive 2006/95/EC, Eco-Design Directive 2005/32/EC, RoHS Directive 2011/65/EU, and the R&TTE Directive 1999/5/EC when installed and used in accordance with the manufacturer’s instructions. A copy of the full Declaration of Conformance may be obtained at www.litheaudio.com/support/policies. Lithe Audio Speakers have a standby mode or remove the power cord from the AC mains.

RECYCLING INFORMATION

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead please deliver it to the applicable collection point for the recycling of electrical and electronic equipment. By recycling this product correctly, you will help conserve natural resources and prevent potential negative environmental consequences. For more detailed information about recycling this product, please contact your local council office, your household waste disposal service, or the shop where you purchased the product(s) from.

THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including but not limited to photocopying, recording, information retrieval systems, or computer network without the written permission of Lithe Audio Ltd. Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. To control this AirPlayenabled speaker, iOS 11.4 or later is required. Apple, iPad, iPad Air, iPad Pro, iPhone, and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. AndroidTM is a trademark of Google, Inc. Google, and Chromecast built-in are trademarks of Google LLC. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Lithe Audio Ltd is under license. Other trademarks and trade names are those of their respective owners. Wi-Fi CERTIFIEDTM is a registered trademark of Wi-Fi Alliance Spotify software and is subject to third-party licenses found here: http://www.spotify.com/connect/third-party- licenses All other products and services mentioned may be trademarks or service marks of their respective owners. 2021 by Lithe Audio Ltd. All rights reserved.
FCC ID: 2AQOB-LWF1V2

WARRANTY COVERAGE

This warranty may not be valid if the product was purchased via an unauthorized dealer. The warranty only applies to individuals that made the original purchase, not transferable. The purchaser must show proof of purchase by way of receipt (hard copy or digital copy) The warranty is null and void if: – the product is altered in any way from its original manufactured state – the security seal has been removed – the product is defaced No one is authorized to make or modify any warranty on behalf of Lithe Audio Ltd.

2 YEAR GUARANTEE
This Ceiling Speaker is of excellent quality and construction. However, if any defects in materials or workmanship do appear during the guarantee period, we will, at our discretion, either repair or replace the defective parts, free of charge, subject to the terms and conditions of our Guarantee shown below. This Guarantee covers both parts and labour. Carriage is not included. This Guarantee provides benefits that are additional to, and do not affect, your statutory rights. This Guarantee does not cover the cost of returning the product to the dealer from whom it was purchased or to ourselves. This Guarantee applies only to products sold and located in mainland Great Britain. It does not cover liability in respect of or replacement of plugs, cables or fuses and also does not cover defects due to:

Failure to use or maintain the product in accordance with Lithe Audio instructions.
The product is connected to an unsuitable electricity supply.
Accidental damage to or abuse or misuse of the product.
Product modification, except by Lithe Audio or an approved agent.
Dismantling of or interference with the product.

Before returning any product under this Guarantee, please check that:

You have followed the product instructions correctly.
Your mains electricity supply is functional.
The defect is not due to a blown fuse.

If you wish to claim under this guarantee you should:

Send the product, postage or carriage paid, to the dealer from whom it was purchased or to Lithe Audio direct.
Ensure that the product is clean and packed carefully (preferably in its original carton).
Enclose details of your name, address, and telephone number and when and where the product was purchased, together with proof of purchase (e.g. invoice or till receipt). · Give exact details of the nature of the defect.

This Guarantee does not cover any other claims whatsoever, including, without limitation, any liability for incidental, indirect, or consequential damage, nor does it cover any claims for conversion or modification or for the costs of repair carried out by any third party without the prior consent of Lithe Audio. If replacement parts are fitted to the product this will not extend the period of the Guarantee. For further advice contact Lithe Audio customer services. Lithe Audio products marked with the CE mark comply with the EC Low Voltage