MERCUSYS Range Extender Installation Guide
- June 12, 2024
- MERCUSYS
Table of Contents
Quick
Installation Guide
Range Extender
Range Extender
-
Power on
Plug the extender into a power outlet near your router, and the Signal LED turns solid red. -
Connect to the extender
Connect your wireless device to the extender’s network MERCUSYS_RE_XXXX.
Note: The default SSID (network name) is printed on the product label at the back of the extender. -
Configure
Method 1: Via MERCUSYS App Get the up-to-date MERCUSYS app, and follow the app instructions to complete the setup.
https://www.mercusys.com/app/download-app
Method 2: Via a Web Browser
a) Launch a web browser and enter http://mwlogin.net. Create a password for future login attempts.
b) Select your router’s host network and enter the network password when prompted.
c) Check the Signal LED on your extender. Green or orange LED indicates a successful connection. -
Relocate
To achieve better signal quality, plug in the extender halfway between your router and the Wi-Fi dead zone.
* Image may differ from actual product.
Enjoy!
Connect your device to the extender using the extended SSID. The default Wi-Fi
password is the same as your host network.
LED Explanation
(For Range Extender Mode)
| Off | Power is off. |
|---|---|
| Blinking | The extender is starting or connecting to the host network. |
| Solid Red | The extender is not connected to the host network. |
| Solid Green | The extender is connected to the host network and works well. |
| Solid Orange | The extender is connected to the host network, but is too far |
away from the router.
FAQ (Frequently Asked Questions)
Q1 How do I configure the extender using WPS?
• Plug the extender into a power outlet near your router, and wait until the Signal LED is lit and solid red. • Press the WPS button on your router. • Within 2 minutes, press the WPS or RESET/ WPS button on the extender. The LED should change from blinking to a solid state, indicating a successful WPS connection.
Q2 How do I reset the extender?
• With the extender powered on, press and hold the Reset or RESET/WPS button until the Signal LED turns off, then release the button. When the Signal LED turns solid on, the reset process is complete.
Q3 What should I do if I cannot access the extender’s web management page?
EU declaration of conformity
MERCUSYS hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
http://www.mercusys.com/en/ce.
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use the device where wireless devices are not allowed.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- For passthrough devices, plug the power strips into the integrated electrical sockets of the devices, but devices of the same or another type not be stacked in normal use.
Please read and follow the above safety information when operating the device. We cannot guarantee thane accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
For MERCUSYS Branded Products Only. For the information about warranty period,
policy and procedures, please visit https://www.mercusys.com/en/support
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).
TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH
ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.
MERCUSYS warrants the MERCUSYS branded hardware product contained in the
original packaging against defects in materials and workmanship when used
normally in according with MERCUSYS’ s guidelines for some period which
depends on the local service from the date of original retail purchase by the
end-user purchaser.
For technical support, the user guide and more information, please visit
http://www.mercusys.com/en/support.
© 2023 MERCUSYS 7107500244 REV3.2.0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>