MERCUSYS AV1000 Gigabit Powerline Starter Extender Installation Guide
- June 4, 2024
- MERCUSYS
Table of Contents
Quick
Installation Guide
Powerline Extender
Plug and Play
- Connect the adapter to a LAN port of your router using an Ethernet cable.
- Plug the extender into the wall outlets on the same electrical circuit.
- Wait until the Power LED on any powerline device turns solid green.
- Connect to the Wi-Fi using the SSID and password on the product label.
- Enjoy!
More: To add additional Powerline adapters and extenders with the default settings, simply plug them into the wall outlets on the same electrical circuit
Attention
- Plug the powerline devices directly into the wall outlets but not the power strips.
- For passthrough powerline devices, plug the power strips into the integrated electrical sockets of the powerline devices.
Secure the Powerline Network with the Pair Button
Tips: We recommend that you plug in the powerline devices near each other
when pairing. Set up a secure network:
- Press the Pair button for 1 second on the adapter. The Power LED starts blinking green quickly.
- Within 2 minutes, press the Pair button for 1 second on the extender. The Power LED starts blinking green quickly.
- When the Powerline LED turns solid green, it’s done.
Note:
- If the Power LED does not blink green quickly, press the Pair button again.
- If you have more extenders, simply plug in and pair each one with the existing adapter to join the network. Then the Wi-Fi settings will automatically sync from the existing extender to the new ones.
LED Description
| Status | Indication |
|---|---|
| Solid Green | The powerline device is on. |
| Blinking Green | Blinking quickly: The powerline device is booting. Or pairing |
is in process. Blinking slowly: The powerline device is not paired.
Solid Orange| The Wi-Fi is off.
Blinking Orange| Wi-Fi Clone or Wi-Fi Move is processing.
Off| The powerline device is off. Or Power-Saving Mode is on (the extender
excluded).
Copy Wi-Fi Settings from Router to Extender
- Press your router’s WPS button.
- Within 2 minutes, press the Wi-Fi button on the extender for 1 second.
- The extender’s LED should start blinking orange quickly. When it turns solid green, Wi-Fi settings are copied. It’s done!
FAQ
(Frequently Asked Questions)
Q1. How do I reset my powerline device?****
– A1. With the powerline device plugged into to the electrical outlet, press and hold the Pair button for at least 6 seconds. Release the button and the LED turn off. When the LED turn back on, the reset process is complete.
Q2. How to troubleshoot if there is no internet connection in my powerline network?****
– A1. Make sure all powerline devices are on the same electrical circuit.
– A2. Make sure all Power LEDs are solid green. If not, pair your adapters and
extenders again.
– A3. Make sure all hardware connections are correctly and securely connected.
– A4. Check if you have an internet connection by connecting the computer
directly to the modem or router.
– A5. Make sure your computer’s IP address is in the same segment as your
router’s.
Q3. What can I do if a successfully-paired powerline device does not reconnect after it has been moved to a new location?****
– A1. Try another socket and make sure it is on the same electrical circuit.
– A2. Try to pair it again, and make sure the Power LED is solid green.
– A3. Check for possible interference, such as a washer, air conditioner or
other household appliances that may be too close to one of the powerline
devices. Plug the appliance into the integrated electrical socket (if the
powerline device has one) to remove some electrical noise.
To learn more about the powerline device, please visit our website
http://www.mercusys.com.
MERCURY hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at http://www.mercusys.com/en/ce.
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- The socket outlet shall be installed near the equipment and shall be easily accessible.
- For passthrough devices, plug the power strips into the integrated electrical sockets of the devices, but devices of the same or another type not be stacked in normal use.
- Plug the powerline devices directly into the wall outlets but not the power strips.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
MERCURY Three Years Limited Product Warranty
For MERCURY Branded Products Only.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE). TO THE EXTENT
ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS. MERCURY warrants
the MERCUSYS branded hardware product contained in the original packaging
against defects in materials and workmanship when used normally in according
with MERCUSYS’s guidelines for a period of THREE YEARS form the date of
original retail purchase by the end-user purchaser.
Specifications are subject to change without notice. is a registered trademark
of MERCUSYS TECHNOLOGIES CO., LTD. Other brands and product names are
trademarks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or
used to make any derivative such as translation, transformation, or adaptation
without permission from MERCUSYS TECHNOLOGIES CO., LIMITED. Copyright © 2020
MERCUSYS TECHNOLOGIES CO., LIMITED. All rights reserved.
For technical support, the user guide and more information, please visit
http://www.mercusys.com/support.
7107500144 REV1.0.0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>