MERCUSYS AC1200 Whole Home Mesh Wi-Fi System Instruction Manual
- June 4, 2024
- MERCUSYS
Table of Contents
MERCUSYS AC1200 Whole Home Mesh Wi-Fi System
Hardware Connection
Connect the Hardware
Connect the hardware according to the diagram in the opening chapter of this guide. If you have multiple mesh routers, choose one to be the main router first. If your internet connection is through an Ethernet cable from the wall instead of through a DSL/Cable/Satellite modem, connect the cable directly to either Ethernet port on your router, and follow Step 3 only to complete the hardware connection.
- Turn off the modem, and remove the backup battery if it has one.
- Connect the modem to either Ethernet port on the router.
- Power on the router, and wait for it to start.
- Turn on the modem.
Configure the Network
- Connect to the main router wirelessly using the default SSID (network name) printed on the router’s label.
- Launch a web browser and enter http://mwlogin.net in the address bar. Create a password for future logins.
- Follow the step-by-step instructions of Quick Setup to configure your internet connection and wireless network.
Optional: If you have more routers, follow web instructions to form a mesh network then relocate the devices as you need.
References
- Regulatory Compliance - Welcome to MERCUSYS
- Frequently Asked Questions for Mesh - Welcome to MERCUSYS
- Support-Welcome to MERCUSYS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>