MERCUSYS 7107500301 Wireless USB Adapter Installation Guide
- June 1, 2024
- MERCUSYS
Table of Contents
MERCUSYS 7107500301 Wireless USB Adapter
Connect to a Computer
Option 1: Directly
Option 2: Via the USB Extension Cable (If provided)
Install Driver
Follow Method 1 if the adapter supports Plug and Play feature. If not, please
try Method 2.
Method 1: Plug and Play
- This adapter supports Plug and Play feature. Plug the adapter in and then it is ready to use.
- If your operating system does not support this feature, follow the steps below:
- Download the driver or check the new release at www.mercusys.com/support
- Unzip the downloaded folder and run the Setup.exe.
- Follow the instructions to complete the installation.
Method 2: via Internal Driver Installation
-
Go to My Computer or This PC.
-
Find out Mercusys disk then run the SetupInstall.exe to start driver installation.
Note: If you cannot find the Mercusys disk, download the driver at www.mercusys.com/support -
Follow the instructions to complete the installation.
Tips
- If you can’t install the driver successfully, disable the antivirus software and firewall, then try again.
- If an unknown publisher message pops up, select Yes to continue.
- If Windows User Account Control requires admin credentials, type user name and password of your Windows administrator account.
For more driver installation support, refer to Troubleshooting > T2.
Join a Wireless Network
- Click the network icon on the taskbar.
- Select your Wi-Fi network, click Connect and enter the password when prompted.
Troubleshooting
If you have problems during the installation, please refer to the following online FAQs.
- Check if the Driver is Successfully Installed: https://www.mercusys.com/faq-262
- Can’t Install the Driver in the Windows Systems: https://www.mercusys.com/en/faq-817
- Can’t Find the Hardware Version of the Adapter: https://www.mercusys.com/en/faq-813
- How to Manually Install / Update Adapters on Windows 10: https://www.mercusys.com/faq-265
Safety Information
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use the device where wireless devices are not allowed.
- Keep the device away from water, fire, humidity or hot environments.
- This product can be powered only by power supplies that comply with Power Source Class 2(PS2) or Limited Power Source(LPS) of IEC 62368-1.
- Mercusys hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK declaration of conformity may be found at https://www.mercusys.com/support/ukca/
- Mercusys hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011/65/EU and (EU) 2015/863.
- The original EU declaration of conformity may be found at https://www.mercusys.com/en/ce
Support
For technical support, user guides, the driver and more information, please
visit https://www.mercusys.com/support
References
- Support-Welcome to MERCUSYS
- Regulatory Compliance - Welcome to MERCUSYS
- How to check driver version of Mercusys adapters and system information of your computer - Welcome to MERCUSYS
- What should I do if I cannot install the driver of Mercusys Network Adapter in Windows computer? - Welcome to MERCUSYS
- How to check whether I have installed the driver for my adapter successfully or not - Welcome to MERCUSYS
- How to Manually Install Adapters on Windows 10? - Welcome to MERCUSYS
- Support-Welcome to MERCUSYS
- UKCA - Welcome to MERCUSYS
Read User Manual Online (PDF format)
Loading......