SP CONNECT Charging Anti Vibration Module User Manual
- June 12, 2024
- SP CONNECT
Table of Contents
SP CONNECT Charging Anti Vibration Module
Product Information
This is an outdoor navigation device that requires setup and charging. It complies with Part 15 of the FCC Rules and operates within recommended operating temperatures. The device has a USB-C input for charging and a wireless output for charging compatible phones. The maximum charge power is 15W, but it may vary depending on the power source, phone model, and temperature. The device has a power consumption of 8-20mA in standby mode. It is IP65 rated, offering protection against dust and water.
Product Usage Instructions
- Ensure the device is charged before use. Connect the provided USB-C cable to the USB-PD input of the device and the appropriate power source.
- Place your compatible phone on the wireless charging module of the device for wireless charging. Ensure that the phone is properly aligned with the module for efficient charging.
- Keep in mind that the charge power may vary depending on factors such as the power source, phone model, and temperature.
- The device can be used for outdoor navigation. Follow the manufacturer’s instructions for using the navigation features.
- Make sure to operate the device within the recommended operating temperature range for optimal performance.
- To comply with FCC rules and minimize interference, avoid using the device in close proximity to radio or television equipment. If interference occurs, try turning off the equipment causing the interference or adjust its distance from the device.
- For safety reasons, maintain a minimum distance of 20cm between the device radiator and your body during installation and operation.
ATTENTION!
- Cut o power supply when not in
- Avoid use in a humid or high temperature environment if
- Don’t hit, disassemble or re-assemble the product – this may lead to
- For waterproof connection use compatible SP Connect™ cables
- High Temperatures can reduce charge e ciency.
- Smartphone power consumption can exceed charge power. Setup phone appropriately!
Setup Tips for Outdoor Navigation
- Outdoor navigation at high temperature reduces charge e ciency.
- Use adaptive screen brightness, consider using night mode, switch o screen
- Use locally stored maps to avoid data tra c and power consumption.
- Turn o data tra c if not
- Turn o unnecessary apps running in the
- Turn o Wi-Fi antenna while you are moving
Technical Specifications
Input| USB-C: USB-PD
USB-A: 5V/2A • 5V/3A QC 2.0/3.0
---|---
Wireless Output| Max 15W
Charge power is variable and depends on power source, phone model, temperature, etc.
Recommended Operating Temperature| -10—40° C
Charge performance will drop above ~40° C
Power Consumption| 8—20 mA (Standby)
IP65 RATED: No ingress of dust; complete protection against contact (dust tight). Water projected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful e ects. Minimum operating temperature: 0°C / 32°F
FCC Statement
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However. there is no quarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving
- Increase the separation between the equipment and
- Connect the equioment into an outlet on a circuit di erent from that to which the receiver is
- Consult the dealer or an experienced radio/TV technician for
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equioment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>