SP-CONNECT 5151-039 Universal Interface Mini User Manual
- June 9, 2024
- SP CONNECT
Table of Contents
5151-039 Universal Interface Mini
UNIVERSAL
INTERFACE MINI
Please note: The 3M™ adhesive used on the Universal Interface will
adhere to many non-porous flat surfaces such as plastic, glass, metal
and painted surfaces. We have also achieved good results sticking it to
silicone cases. It will not adhere to rough, uneven or structured
surfaces. You will need a smooth surface of at least 2.16 x 2.56 inches /
55 x 65 mm for the interface to be placed on. Make sure to clean the
surface with an alcohol wipe before use to remove any dirt or oily
residue. The adhesive mount cannot be re-used, so make sure to
position the adapter carefully. We recommend only using the Universal
Interface on phone cases as some smartphones have nano-particle
coatings that repel the adhesive, or have removable battery covers that
could come loose during use. If you are uncertain whether the UNIVERSAL
INTERFACE will adhere to your device or case, please email:
support@sp-connect.eu.
Use at own risk. In no event shall SP United Holding AG be liable for any
direct, indirect, punitive, incidental, special consequential damages, to
property, whatsoever arising out of or connected with the use or
misuse of this product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>