VISUAL COMFORT CHA 8947 Square Chunky Stacked Table Lamp Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT CHA 8947 Square Chunky Stacked Table Lamp
Product Information
- Product Name: Square Chunky Stacked Table Lamp
- Item Number: CHA 8947
- Product Type : Light Fixture
- Compatibility: Bulb (not included)
- Manufacturer: Not specified
Product Usage Instructions
- Carefully remove all parts from the box.
- Install the harp (C) onto the saddle (D).
- Place the shade (B) onto the harp (C) and secure it with the finial (A).
- Insert the bulb (not included) into the socket.
- Remove the protective plug cover (E) from the plug.
- Plug the lamp into a proper electrical outlet.
- Test the fixture to ensure it is functioning properly.
- Installation is now complete.
Care Instructions Clean the lamp only with a soft dry cloth or feather
duster. Do not use abrasive or chemical agents.
NOTICE: This light fixture should be installed in accordance with all
applicable, local installation codes, and by a person familiar with the
construction and operation of it, as well as the hazards involved. Inspect the
item and its contents carefully. If any damage or defect is found, do not
install it. Retain all packaging material until installation is complete and
approved.
UL Listed: This product is tested and certified by UL (Underwriters
Laboratories) for compliance with applicable safety standards in the United
States.
ASSEMBLY INSTRUCTIONS
Square Chunky Stacked Table Lamp
Item # CHA 8947
NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect items and contents carefully. If any damage or defect is found, do not install it. Retain all packaging material until installation is complete and approved.
- Carefully remove all parts from the box.
- Install harp (C) onto the saddle (D).
- Place shade (B) to the harp (C) and secure with a finial (A).
- Insert bulb (not included) into the socket.
- Remove the protective plug cover (E) from the plug.
- Plug into a proper electrical outlet and test the fixture.
- Installation is complete.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.