OLIGHT OP1 Odin Rechargeable LED Flashlight User Manual
- June 11, 2024
- OLIGHT
Table of Contents
OP1 Odin Rechargeable LED Flashlight
User Manual
SAFETY WARNINGS
PLEASE READ THIS DOCUMENT CAREFULLY BEFORE USE AND KEEP
IT FOR FUTURE REFERENCE!
( WARNINGS OP1 )
A
DANGER
- Don’t leave the light in a car where inside of temperature may be over 60°C, or in similar places.
WARNING
- Do not short the charging port with metallic object intentionally.
CAUTION
- Do not look directly at the light source or shine to eyes, may cause temporary blindness or permanent damage to the eyes.
- Do not block the light outlet at close range, the energy emitted from the light may cause the object to burn.
- Do not remove or replace the built-in battery of the charger by self.
NOTICE
-
Do not soak in water: the ink will become diluted or unable to write after being dissolved in water.
-
Beware of dropping: The pen tip will lose its writing function if it is impacted, or even leak ink.
-
Please use the pen ink provided by Olight. Using other brands may cause malfunction of the pen tip light and charging function.
-
If the product gets wet, please wait until it is dry before activating the pen tip light or it may cause damage.
-
Please clean the internal pin of the charging base and the surrounding debris periodically to prevent the inability to charge.
-
Please regularly clean the tip of the pen to allow the light to function properly.
-
The battery life will be shortened when both the pen clip light and the pen tip light are lit simultaneously.
-
Do not disassemble the product.
-
The pen clip clamps objects at a maximum thickness of 3mm. The clip may be deformed when it exceeds this thickness and loses its due
performance. -
Do not put a hot light into any type of fabric bag or fusible plastic container.
-
Do not activate the maximum brightness mode multiple times continuously to prevent the high temperature on the surface.
-
When the light gets hot, please switch it to low brightness mode, or shut off the flashlight temporarily.
REMARK
- Before long term storage, please fully charge the product.
- The maximum brightness level can only be used when the remaining battery power is sufficient to do so.
- Operating time in Turbo or high mode varies with ambient temperature and heat dissipation conditions, better heat dissipation longer runtime.
EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the
usage of the product inconsistent with the warnings in the manual, including
but not limited to using the product inconsistent with the recommended lockout
mode.
Dongguan Light E-Commerce Technology Co., Ltd
4th Floor, Building 4, Keg Industrial Park, No 6 Zhong nan Road,
Changing Town, Dongguan City, Guangdong, China.
Made in China
03, 07, 2023
3.4000.0525