VISUAL COMFORT MF1350 Clifford Large Forged Floor Lamp Instruction Manual
- October 30, 2023
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT MF1350 Clifford Large Forged Floor Lamp
Product Information
- Product Name: Clifford Large Forged Floor Lamp
- Item Number: MF1350
NOTICE : This light fixture should be installed in accordance with all applicable, local installation codes and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If anydamage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
Tools Required (Not Included)
- Scissors
Assembly Instructions
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Install harp (C) by squeezing together and inserting into the top of saddle (D).
-
Remove finial (A) from harp (C).
-
Remove shade (B) from packaging and install to harp (C) using finial (A).
NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. -
Install light bulb into the socket.
-
Remove protective cover (E) from plug.
-
Plug into electrical outlet and test the fixture.
Care Instructions
Clean only with a soft dry cloth or feather duster. Do not use abrasive or
chemical agents.
Assembly Instructions
Clifford Large Forged Floor Lamp
Item # MF1350
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install. Retain all
packaging material until installation is complete and approved.
TOOLS REQUIRED
(NOT INCLUDED):
- Scissors
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Install harp (C) by squeezing together and inserting into the top of saddle (D).
-
Remove finial (A) from harp (C).
-
Remove shade (B) from packaging and install to harp (C) using finial (A).
NOTE : If shade has additional packaging, carefully cut off from interior of shade to avoid damages. -
Install light bulb into the socket.
-
Remove protective cover (E) from plug.
-
Plug into electrical outlet and test the fixture.
Care Instructions
Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.