WORLD EYECAM 3046 Network Camera User Manual
- June 12, 2024
- WORLD EYECAM
Table of Contents
WORLD EYECAM 3046 Network Camera
Product Information
The Network Camera is a versatile device designed for surveillance purposes. It is equipped with various features and interfaces to provide high-quality video monitoring and recording.
- Network interface: Supports PoE (Power over Ethernet) for easy installation and connectivity.
- Power input interface: Accepts DC12V and AC24V power sources.
- MicroSD card slot: Allows for local storage of recorded video footage.
- One-key reset button: Restores the camera to its default settings.
- Audio input interface: Enables audio recording through an external microphone.
- Audio output interface: Allows for audio playback through external speakers.
- Alarm input interface: Supports multiple alarm inputs for triggering specific actions.
- Alarm output interface: Provides alarm outputs for activating external devices.
- RS-485 interface: Connects to a serial communication device for advanced control.
- Power output interface: Supplies power to compatible devices.
- BNC/CVBS interface: Enables video output through a BNC connector.
- Grounding: Ensures proper grounding for electrical safety.
The Network Camera complies with FCC and EU regulations, ensuring safe and reliable operation. Please refer to the user manual for detailed instructions on compliance, installation, and usage.
Product Usage Instructions
- Activate the Network Camera by connecting it to a power source using the appropriate power input interface (DC12V or AC24V).
- If desired, insert a MicroSD card into the provided slot for local storage of recorded videos.
- To reset the camera to its default settings, press the one-key reset button.
- Connect an external microphone to the audio input interface if audio recording is required.
- For audio playback, connect external speakers to the audio output interface.
- If needed, connect alarm devices to the alarm input interface for triggering specific actions.
- Use the alarm output interface to connect external devices that need to be activated in response to alarms.
- If advanced control is required, connect a serial communication device to the RS-485 interface.
- For video output, use the BNC/CVBS interface to connect to a compatible display or recording device.
- Ensure proper grounding by following the recommended guidelines for connecting the camera’s grounding.
Always adhere to safety instructions and comply with local laws, electrical safety regulations, and fire prevention regulations when using the Network Camera.
Installation
Waterproof
Activate and Access Network Camera
Specification
| Interface | Description |
|---|---|
| LAN(PoE) | Network interface, PoE supported |
| DC12V, AC24V | Power input interface |
MicroSD
| MicroSD card slot
Insert the MicroSD card for local storage
RESET| One-key reset button
AUDIO IN| Audio input interface
AUDIO OUT| Audio output interface
ALARM IN
| Alarm input interface
IN1 and GND1, IN2 and GND2 are
two pairs of alarm inputs
ALARM OUT
| Alarm output interface
1A and 1B, 2A and 2B, 3A and 3B are three pairs of alarm outputs
RS-485| D+ or D- connect to 485
DC12V, GND
/ DC 12V_OUT
|
Power output interface
BNC| BNC/CVBS interface
| Grounding
Note:
The interface varies with the models. Please refer to the product datasheet
for details.
About this Manual
The Manual includes instructions for using and managing the product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to
change, without notice, due to firmware updates or other reasons. Please find
the latest version in the company website.
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
Trademarks and logos mentioned are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. OUR COMPANY MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL OUR COMPANY BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF OUR COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Wi-Fi device:
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation
EU Conformity Statement
This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU, Wi-Fi device: the RE Directive 2014/53/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info. 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
Wi-Fi device:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
KC
Class B:
This device is intended for mainly home use (Class B) and may be used in all
areas. use the product correctly to avoid danger or property loss.
Laws and Regulations
The device should be used in compliance with local laws, electrical safety
regulations, and fire prevention regulations.
Electricity
In the use of the product, you must be in strict compliance with the
electrical safety regulations of the nation and region. The equipment shall
not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the equipment. Provide a surge
suppressor at the inlet opening of the equipment under special conditions such
as the mountain top, iron tower, and forest. CAUTION: To reduce the risk of
fire, replace only with the same type and rating of fuse.
Battery
Do not ingest battery. Chemical burn hazard! This product contains a
coin/button cell battery. If the coin/button cell battery is swallowed, it can
cause severe internal burns in just 2 hours and can lead to death. Keep new
and used batteries away from children. If the battery compartment does not
close securely, stop using the product and keep it away from children. If you
think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
CAUTION:
Risk of explosion if the battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types). Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. + identifies the positive terminal(s) of equipment which is used with, or generates direct current. – identifies the negative terminal(s) of equipment which is used with, or generates direct current.
Fire Prevention
No naked flame sources, such as lighted candles, should be placed on the
equipment. The serial port of the equipment is used for debugging only.
Hot Surface Prevention
CAUTION:
Hot parts! Burned fingers when handling the parts.
Wait one-half hour after switching off before handling parts. This sticker is to indicate that the marked item can be hot and should not be touched without taking care. For device with this sticker, this device is intended for installation in a restricted access location, access can only be gained by service persons or by users who have been instructed about the reasons for the restrictions applied to the location and about any precautions that shall be taken.
Installation
Install the equipment according to the instructions in this manual. To prevent
injury, this equipment must be securely attached to the floor/wall in
accordance with the installation instructions. Never place the equipment in an
unstable location. The equipment may fall, causing serious personal injury or
death.
Power Supply
Device powered by Safety Extra-Low Voltage(SELV): The power source should meet
limited power source or PS2 requirements according to IEC 60950-1 or IEC
62368-1 standard.
Device powered by AC mains supply voltage: The equipment must be connected to an earthed mains socket-outlet. An appropriate readily accessible disconnect device shall be incorporated external to the equipment. An appropriate overcurrent protective device shall be incorporated external to the equipment, not exceeding the specification of the building. An all-pole mains switch shall be incorporated in the electrical installation of the building. Ensure correct wiring of the terminals for connection to an AC mains supply. The equipment has been designed, when required, modified for connection to an IT power distribution system.
White Light Illuminator (If supported)
Possibly hazardous optical radiation emitted from this product. DO NOT stare
at operating light source. May be harmful to the eyes. Wear appropriate eye
protection or DO NOT turn on the white light when you assemble, install or
maintain the camera.
Transportation
Keep the device in original or similar packaging while transporting it.
System Security
The installer and user are responsible for password and security
configuration.
Maintenance
If the product does not work properly, please contact your dealer or the
nearest service center. We shall not assume any responsibility for problems
caused by unauthorized repair or maintenance. A few device components (e.g.,
electrolytic capacitor) require regular replacement. The average lifespan
varies, so periodic checking is recommended. Contact your dealer for details.
Cleaning
Please use a soft and dry cloth when clean inside and outside surfaces of
the product cover. Do not use alkaline detergents.
Using Environment
When any laser equipment is in use, make sure that the device lens is not
exposed to the laser beam, or it may burn out. DO NOT expose the device to
high electromagnetic radiation or dusty environments. For indoor-only device,
place it in a dry and well-ventilated environment. DO NOT aim the lens at the
sun or any other bright light. Make sure the running environment meets the
requirement of the device. DO NOT place the camera in extremely hot, cold,
dusty or damp locations, and do not expose it to high electromagnetic
radiation.
Emergency
If smoke, odor, or noise arises from the device, immediately turn off the
power, unplug the power cable, and contact the service center.
Time Synchronization
Set up device time manually for the first time access if the local time is not
synchronized with that of the network. Visit the device via Web browse/client
software and go to time settings interface.
Reflection
Make sure that no reflective surface is too close to the device lens. The IR
light from the device may reflect back into the lens causing reflection.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>