WORLD EYECAM 3159 SuperLive Plus Mobile Surveillance App User Manual
- June 12, 2024
- WORLD EYECAM
Table of Contents
3159 SuperLive Plus Mobile Surveillance App
Product Information
The Mobile Surveillance system is a user-friendly application
that allows users to remotely access and monitor their IPC/DVR/NVR
devices. It supports various notable features such as device
preview, remotely playing back multiple channels, and convenient
gesture operations. The system also supports fisheye mode preview
for fisheye cameras and the ability to search face images by image.
Additionally, it offers sharing options such as Dropbox sharing,
downloading address sharing, and email sharing, enabling users to
connect with each other anytime and anywhere.
Network Configuration
1.1 Access Device via WLAN:
-
Connect your device (IPC/DVR/NVR) to a wireless router.
-
Check DHCP settings in both the router and the device to
automatically obtain an IP address. -
Alternatively, you can enter the IP address manually.
-
On your mobile phone, use the WIFI function to connect to the
wireless router. -
Add the IP address and port of the device or scan the QRCODE of
the device to add it to the mobile phone surveillance client. -
Note: Ensure that your phone network and device network are in
the same network segment on LAN.
1.2 Access Device via 2G/3G/4G Network:
-
Set up the network for your device (IPC/DVR/NVR) by accessing
the network setup interface. -
If you use PPPoE to connect your device, enable PPPoE and enter
the username and password provided by your ISP in the network
interface. Click Apply. -
If you want to utilize a dynamic domain name, apply for a
domain name in a DNS server supported by the device. -
If you have a static WAN IP address, enter your IP address,
gateway, and port in the network setup interface. -
If you use a LAN IP address, enter your IP address, gateway,
and port in the network setup interface. Then, forward the IP
address and port number in the virtual server setup of the router
or virtual server (if UPnP function is enabled in both the device
and router, you can skip this step). -
Note: Port forwarding settings may vary depending on the router
and server. Refer to the router’s manual for detailed
instructions. -
Add the WAN IP address or domain name of the device or scan the
QRCODE of the device to add it to the mobile phone surveillance
client.
Install APP
To install the Mobile Surveillance APP on your iPhone/iPad or
Android smartphone, follow these steps:
- Open the Play Store (or APP Store) program on your device.
- Search for “SuperLive Plus”.
- Select “SuperLive Plus” and download the software.
- Follow the on-screen directions to install the software.
Mobile Manual
Mobile Surveillance User Manual
Contents
1 Network Configuration …………………………………………………………………………………………….. 1 1.1 Access
Device via WLAN ……………………………………………………………………………………… 1 1.2 Access Device via
2G/3G/4G Network……………………………………………………………………..1
2 Install APP ………………………………………………………………………………………………………………. 2 3 Setting and
Application …………………………………………………………………………………………….. 2
3.1 Login…………………………………………………………………………………………………………………… 2 3.2 Live
View…………………………………………………………………………………………………………….. 3 3.3 Remote Playback
………………………………………………………………………………………………… 12 3.4 Remote
Setting……………………………………………………………………………………………………. 13 3.5 Local
Setting………………………………………………………………………………………………………. 14 3.6 Server
List………………………………………………………………………………………………………….. 15 3.7 File Management
………………………………………………………………………………………………… 16 3.8 Local
Playback……………………………………………………………………………………………………. 18 3.9 Push Setting
……………………………………………………………………………………………………….. 19 3.10 Notifications
…………………………………………………………………………………………………….. 19 3.11 Help
………………………………………………………………………………………………………………… 20 3.12 About
………………………………………………………………………………………………………………. 20
Mobile Surveillance User Manual
Mobile Surveillance
SuperLive Plus is a new generation of independent research and development
surveillance App based on mobile platform. This App enhances the interfacial
design, function integration and technology optimization compared with the
last version. Additionally, it is compatible with our new generation of
platform NVR. Main Features: Re-designing the interface makes the operation
easier and the interface look better. The P2P connection makes the connection
faster and more stable. Support H264/H265 decoding Gesture lock makes the
surveillance system safer. Support push settings and notifications The
functions of sharing to the third App or platform, including screenshot
sharing, device
sharing, dropbox sharing, downloading address sharing and Email sharing, help
to approach each other anytime and anywhere. Support varies of notable
features, eg., device preview, remotely playing back multiple channels and
many convenient gesture operations. Support fisheye mode preview (only
available for fisheye camera) Support search face image by image
1 Network Configuration
1.1 Access Device via WLAN
Connect device (IPC/DVR/NVR) via wireless router. Then check DHCP both in
router and device to automatically obtain IP address or enter the IP address
manually.
Use WIFI function in your mobile phone to connect the wireless router. Add the
IP address and port of the device or scan the QRCODE of the device to add the
device
in the mobile phone surveillance client. Note: Make sure your phone network
and device network are in the same network segment on LAN.
1.2 Access Device via 2G/3G/4G Network
Set the device (IPC/DVR/NVR) network. Please go to the network setup interface
of the device.
If you use PPPoE to connect device, please enable PPPoE and enter username and
password received from you ISP in the network interface. Then click “Apply”.
If you want to utilize dynamic domain name, please apply for a domain name in
a DNS server supported by the
1
Mobile Surveillance User Manual
device. If you have a static WAN IP address, please go to network setup
interface to enter your IP
address, gateway and port. If you use LAN IP address, please go to network
setup interface to enter your IP address,
gateway and port and then forward IP address and port number in virtual server
setup of the router or virtual server (If you has enabled the UPnP function in
both the device and router, you can skip this step). Port forwarding setting
may be different in different routers and servers. Please refer to the
router’s manual for details. After you forward your LAN IP address and port,
please check the WAN IP address in the router or server.
Add the WAN IP address or domain name of the device or scan the QRCODE of the
device to
add the device in the mobile phone surveillance client.
2 Install APP
This surveillance APP can be searched and installed through iPhone/iPad and
Android smartphones. The installation steps are as follows. Run “Play Store”
(or “APP Store”) program. Search “SuperLive Plus”.
Click “SuperLive Plus” to download the software. Follow directions to install
the software.
3 Setting and Application
3.1 Login
2
Mobile Surveillance User Manual
Login by scanning the QRCODE
Click to scan the QRCODE of the device through your mobile phone, and then it
will automatically obtain serial number and user. After manually inputting
nick name and the password, click “Preview” button to go to the live
interface. Note: If the device and the mobile client are in the different
network segment, the device shall support QRCODE and enable the NAT.
Login by domain name or IP Address
Input IP address/domain name, nick name, user and password. Click “Preview” to
go to the live interface. Domain name/IP Address: WAN IP address (or domain
name) plus HTTP port of the device. For example: 210.21.183:89 or
123.dvrdydns.com:89. User and Password: The login user and password of the
device. The default user name is admin and the default password is 123456.
Note: To search and add the device in the same network segment, click button.
3.2 Live View
3
Mobile Surveillance User Manual
Close channel preview: Drag the window to the deletion button to close the
channel preview. Channel preview: Choose a window and click the channel number
to preview the channel. Device preview: Choose a device name and drag it to
the window area. Then it will play according to the following rules. 1) If the
channel quantity is less than or equal to the current screen display mode, all
channels of the device will be previewed in the current screen display mode.
2) If the channel quantity is more than the current screen display mode and
the current screen display mode is more than 9, the channel of the device will
be previewed in the current screen display mode. 3) If the channel quantity is
more than the current screen mode and the current screen display mode is less
than or equal to 9, it will play as the following rules. a) if the channel
quantity is more than or equal to 9, 9 channels of the device will be
previewed; b) if the channel quantity is less than 9, all channels of the
device will be previewed. Channel indication light in the live interface.
: Initial state. : Sensor alarm/sensor alarm based recording : Manual
recording : Intelligence alarm based recording : Motion alarm/motion alarm
based recording : Schedule recording
Icons in the live interface : Click it to go to remote setting, local setting,
sever list, file and so on. : Click it to go to server list. : Free channel. :
Channel display. : Click it to play the previous channel group. : Click it to
play the next channel group. 4
Mobile Surveillance User Manual
Close all previews.
: Open/close two-way talk. : Open/close the audio. : Click it to choose
1/4/9/16 screen(s) display mode. Click “More” to choose more screen
display modes. : Click it to go to the remote playback interface. : Click it
to view more menus, such as add favorite, manual alarm, etc.
: Snap. Choose the channel and click it to capture the channel image. :
Open/close the local record.
It will go to the single channel display mode by double clicking one channel.
After clicking this single channel, the following icons will be displayed.
Click the device name (like “3536”) to show device name list as sown below. Click play all channels of this device. Click ” ” button to add new devices.
button to
5
Mobile Surveillance User Manual
: Fisheye mode. This icon appears only when this channel is a fisheye camera.
Click this icon to go to fisheye display mode as shown below. Different view
modes can be selected in this interface.
: Click it to choose the definition of the current image. : Click it to adjust
the image. The brightness, white balance, sharpness, image mirror and zoom can
be set.
6
Mobile Surveillance User Manual
: Zoom adjustment (this function is only available for cameras with motorized
lens). : Click it to go to PTZ mode. You may control the PTZ by sliding the
screen.
: Full screen.
Turn you phone and make the live image display in landscape mode or go to the
full screen mode. Then the following icons will be displayed by clicking the
current image.
PTZ Control
The added device must support PTZ function, or PTZ mode cannot be enabled.
Click see the following image.
button to
7
Mobile Surveillance User Manual
Please control the PTZ by sliding the image in direction of the arrow marked on the image. The PTZ will automatically focus on the little red circle by clicking the image. Then the 3D function can be enabled (the added device must be support 3D function, or this function is ineffective).
Add Favorite Group In the live interface, click
and then select “Add Favorite” to add favorite group.
Click “+” in front of the group name to save the current channels to the
favorite group. You can also click to select other screen display mode and
channels. Then save these channels to the favorite group. Click to play the
favorite channels of the group immediately.
Manual Alarm Click “Manual Alarm” to go to the following interface. If your
device don’t support alarm out function, please skip the instruction.
8
Mobile Surveillance User Manual
Select the desired alarm output and then click “Trigger” button to trigger alarm out manually. Click “Clear” to clear alarm output.
Face Search Only the device with face search function supports the following applications. 1. Adding new members
Click
and select “Adding person” to go to the following interface.
Take a snapshot of a person or click
to select a face in your album.
Fill in the relevant information of the person and save it.
2. Search by image Select “Search by image”.
9
Mobile Surveillance User Manual
Take a photo of a person or click
to select a face in your album.
Set the similarity, max. count, start and end time.
Click “Start Searching” to search the result.
Click the searched result to view the details, including snapshot time, camera name, face ID and so on. Click in the middle of the image to play the record.
3. Search by name Select “Search by name”. Select the relevant group and then
enter the name you want to search. Click the searched name and then choose a
face.
10
Mobile Surveillance User Manual
Set the similarity, max. count, start and end time. Click “Start Searching” to
search the result. Click the searched result to view the details, including
snapshot time, camera name, face ID and so on. Note: If just one face picture
is selected to search the result, the trajectory tracking information can be
viewed in the search result interface. Click in the middle of the image to
play the record.
Trajectory tracking: Click to view the target in different places. Click one
file and click record. Note that the next trace will be automatically played.
11
button to play the
Click
Mobile Surveillance User Manual
to play all trace records automatically.
3.3 Remote Playback
Click icon in the live interface to remotely play the record saved in the
HDD(s) of the device.
12
Mobile Surveillance User Manual
Please control the playback by using the buttons mentioned above. Then turn you phone and make the remote playback display in landscape mode.
: Choose the recording mode. : Click it to choose date. : Click it to choose the channel. : Open/close the local record. : Open/close the audio. : Click it to choose the definition of the current image. : Exit the full screen mode.
3.4 Remote Setting
In the live interface, click
icon. This will bring the following menu setup items. Select
“Remote setting” to go to the remote setting interface. Then click the device name to view its
function panel (Different devices have different remote setting items. The following pictures are for
reference only).
13
Mobile Surveillance User Manual
Please refer to the user manual of the device to set the relevant items.
3.5 Local Setting
Select “Local setting” to go to the following interface. Slide down to see all
setting items.
Receive New Notification: please enable or disable it as needed. Playback Time
of Pre push message (sec): Choose the time as needed. Notification: You can
choose “No Disturb” or “Sound and Vibration. Reserved disk space (MB):
50/100/200/500/1024MB can be optional. Recycle Recording: Enable/disable
record recycle. If enabled, the system will automatically delete the old
records and recycle the space if it is completely utilized. Snap num.: Set the
number of snap. Split snap: Enable/disable split snap. Favorite: Set the
favorite group here after you collect the favorite group.
14
Mobile Surveillance User Manual
Select the name of the favorite group and click icon to modify the name of the
favorite group. Click icon to show the channels of the group. Select the
channel of the favorite group and click
icon to delete the channel. Select the group name and click icon to delete all
channels of the group. Launch setting: Set to play favorite group or play
device or play last preview channels after starting this software. Setup
Password gesture: For your client privacy safety, you can set password
gesture. Screen Rotation Correction: Please enable it as needed. OSD: You can
enable or disable the local OSD. PTZ direction reverse control: Please enable
it as needed. PTZ gesture operation prompts: Please enable it as needed. Auto
connection: Enable or disable it as desired.
3.6 Server List
In the server list interface, you can add, modify and check the information of
the device.
15
Mobile Surveillance User Manual
After you go to the server list interface, the added devices will be listed.
Click this icon to return to the live view interface.
: Connection Status; green means successful connection; grey means connection failure.
: Click it to delete the device. : Click it to modify the device.
: Click it to view the device information (like device name, firmware version, etc.)
: Click it to preview the device. : Click it to enlarge QR code. Press and hold the QR code to share this device.
Click
to add a device. You can add the device through IP address/domain name/serial
number/scanning the QR code.
3.7 File Management
Go to the file interface as shown below.
16
Mobile Surveillance User Manual
Icon Instruction: : Return to the live view interface. : Selection. : Search
Click it to set the specific start and end time and choose the desired
devices. Click to search files. You can search files by entering date, time,
device name and/or channel. Separate terms with a space. Click and then click
/ to select files. Then click to delete these selected files. Picture View:
Select one picture and click it to view this picture as shown below.
: Return to the previous interface. : Click it to rotate a picture to the
left.
17
Mobile Surveillance User Manual
: Click it to rotate a picture to the right. : Click it to delete the picture.
: Click it to share pictures on different social media platforms, like
Twitter, Facebook, etc. Additionally, videos can be shared on Dropbox here.
3.8 Local Playback
In the file management interface, the local record file can be searched. Click
the play button in the middle of the picture to play the local record file.
Slide the timeline to select the play time. Green block indicates manual
record. Turning your phone can make the local playback display in landscape
mode.
18
Mobile Surveillance User Manual
3.9 Push Setting
You can push the information of online devices as shown below.
When an alarm event happens, the alarm information will pop up as shown below.
Click Click Click
to view the current video. to view the record. to set alarm out.
3.10 Notifications
After you enable the device notification function in Push Setting, you can
receive the relative information.
19
Mobile Surveillance User Manual
3.11 Help
You may view the help documentations in respect of live view, remote playback,
server list, file, remote setting, local setting and so on in the help
interface.
3.12 About
In this interface, you can check the information of the software version.
Choose Share APP and then press and hold the QRCODE to share the information
of the software. Click “Detect new version to find the new version.
20
Mobile Surveillance User Manual
Select “Rate the app” to give a score for the APP. Bug Report: when the APP
crash or failure occurs, you can choose this item and send the bug report to
the technical support of the APP for quickly solving the problem. To send a
bug report: Click “User Experience Program” to agree the privacy statement.
Click the log report to show a QRcode. Save this QRcode and send it to the
technical support of the APP. Note: You also can click the “Send bug report”
button to generate a bug report.
A7 21
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>