VISUAL COMFORT RL 3633 Halifax Small Table Lamp Instruction Manual

VISUAL COMFORT RL 3633 Halifax Small Table Lamp

Product Information

Halifax Small Table Lamp Item # RL 3633

This product is a small table lamp designed for indoor use. It provides ambient lighting and is suitable for various settings such as living rooms, bedrooms, and offices. The lamp requires a light bulb (not included) and should be installed in accordance with all applicable local installation codes by a person familiar with its construction and operation.

Please inspect the item and its contents carefully before installation. If any damage or defect is found, do not proceed with the installation. Retain all packaging material until the installation is complete and approved.

Assembly Instructions

Tools Required (Not Included):

Scissors

1. Carefully remove all parts from the box and place them on a clean, soft surface.
2. Install the harp (C) onto the saddle (E) and adjust the harp (C) to the desired height. Then, tighten the adjustment knobs (D).
3. Remove the finial (A) from the harp (C).
4. Remove the shade (B) from its packaging and install it onto the harp (C) using the finial (A). If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damage.
5. Install a light bulb into the socket.
6. Remove the protective cover (F) from the plug.
7. Plug the lamp into an electrical outlet and test the fixture.

Care Instructions

• Clean the lamp only with a soft dry cloth or a feather duster.
• Do not use abrasive or chemical agents that may damage the lamp’s surface.

Please follow these instructions carefully to ensure safe and proper usage of the Halifax Small Table Lamp.

Halifax Small Table Lamp

Item # RL 3633

NOTICE:

This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install it. Retain all packaging material until installation is complete and approved.

ASSEMBLY INSTRUCTIONS

TOOLS REQUIRED

• (NOT INCLUDED): Scissors

INSTALLATION

1. Carefully remove all parts from the box. Place on a clean, soft surface.
2. Install harp (C) onto saddle (E), adjust harp (C) to desired height, then tighten adjustment knobs (D).
3. Remove finial (A) from harp (C).
4. Remove shade (B) from packaging and install to harp (C) using finial (A).
   • NOTE : If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damage.
5. Install a light bulb into the socket.
6. Remove protective cover (F) from the plug.
7. Plug into an electrical outlet and test the fixture.

Care Instructions

• Clean only with a soft dry cloth or feather duster.
• Do not use abrasive or chemical agents.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>