VISUAL COMFORT KW3932 Onda Medium Table Lamp Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT KW3932 Onda Medium Table Lamp Instruction Manual
Onda Medium Table Lamp
Item # KW3932
NOTICE : This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED) : Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface.
2. Install harp (D) by squeezing together and inserting into the top of saddle (E).
3. Remove finial (B) from harp (D).
4. Remove shade (C) from packaging and install to harp (D) using finial (B).
NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages.
5. Install light bulb into the socket.
6. Place diffuser (A) on the top of shade (C).
7. Remove protective cover (F) from plug.
8. Plug into electrical outlet and test the fixture.
Care Instructions : Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
NOTICE : Please follow instructions below to avoid possible damages caused by improper removal.
1. Open box and remove top layer of packaging.
2. Carefully lift body by fabric handles while supporting other end of body until clear of packaging. Place upright on a clean, soft surface.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>