Evergreen LED Solar Lantern Instruction Manual

June 12, 2024
Evergreen

LED SOLAR LANTERN
Assembly, operating and safety instructions

Evergreen LED Solar Lantern - Cover

IAN 386580_2107

LED Solar Lantern

Evergreen LED Solar Lantern - Product Overview 1 Evergreen LED Solar Lantern - Product Overview 2 Evergreen LED Solar Lantern - Product Overview 3

List of pictograms used

| Splashproof
---|---
| Direct current/voltage
| Rechargeable battery included
| CE mark indicates conformity with  relevant
EU  directives applicable for this product.
| Warm white light
| Illumination time: 8 hours
| Switches on automatically in darkness
| For outdoor use

Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Proper use

The product is intended for outdoor use. The product is suitable for use in private household and is not intended for commercial use or for use in other applications.

  • This product is only intended as a decoration and is not suitable for lighting purposes.
Description of parts and features

1. Solar cell
2. Solar cell housing
3. LED light chain
4. Handle
5. Glass jar| 6. ON/OFF switch
7. Battery compartment
8. Battery compartment cover
9. Rechargeable battery
10. Screws
---|---

Scope of delivery

1 LED solar light and rechargeable battery
1 Assembly, operating and safety instructions

Technical data
Operating voltage: 1.2 V
Rechargeable battery: 1 x Ni-MH rechargeable battery/AAA/

1.2 V   / 300 mAh
LED:| 20 x Micro LED
Power:| max. 0.021 W (HG07137A)
max. 0.022 W (HG07137B)
max. 0.021 W (HG07137C
Protection type:| IP44 (splash proof)
Solar cell:| approx. 40 x 40 mm
Lighting time
(with full charge):| approx. 8 hours

Safety instructions

PLEASE READ THE INSTRUCTIONS FOR USE PRIOR TO USE! PLEASE KEEP THE INSTRUCTIONS IN A SAFE PLACE! IF PASSING THIS PRODUCT ON TO A THIRD PARTY ALSO INCLUDE ALL DOCUMENTS.

  • This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be made by children without supervision.
  • Do not use the product if you detect any kind of damage.
  • Always switch off the product, when storing it in dark environment, in order not to discharge the rechargeable battery.
  • The LEDs are not replaceable.
  • If the LEDs fail at the end of their lives, the entire product must be replaced.
  • The product does not contain any parts that can be serviced by the user.
  • Never plug in the LED light chain 3 directly into a 230 V∼ (alternating current) directly.
  • The product is not a toy and should not be player by children.
  • Children are not able to understand the danges that can occur when handling the product.
  • The product can never be used as a container.

Product-specific safety instructions

  • Make sure that the solar cell is free of dirt and free of snow and ice in winter. Otherwise the performance of the solar cell will diminish.
 Safety instructions for batteries/rechargeable batteries
  • DANGER TO LIFE! Keep batteries/rechargeable batteries out of reach of children. If accidentally swallowed seek immediate medical attention.

  • Swallowing may lead to burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion.

  • DANGER OF EXPLOSION! Never recharge non-rechargeable batteries. Do not short-circuit batteries/rechargeable batteries and/or open them.
    Overheating, fire or bursting can be the result.

  • Never throw batteries/rechargeable batteries into fire or water.

  • Do not exert mechanical loads to batteries/rechargeable batteries.

Risk of battery leakage

  • Avoid extreme environmental conditions and temperatures, which could affect batteries/rechargeable batteries, e.g. radiators/direct sunlight.

  • If batteries/rechargeable batteries have leaked, avoid contact with skin, eyes and mucous membranes with the chemicals!
    Flush immediately the affected areas with fresh water and seek medical attention!

  • WEAR PROTECTIVE GLOVES! Leaked or damaged batteries/rechargeable batteries can cause burns on contact with the skin. Wear suitable protective gloves at all times if such an event occurs.

  • In the event of a battery leak, immediately remove it from the product to prevent damage.

  • Only use the same type of batteries/rechargeable batteries.
    Do not mix used and new batteries/rechargeable batteries.

  • Remove the batteries/rechargeable batteries if the product will not be used for a longer period.

Risk of damage of the product

  • Only use the specified type of battery/rechargeable battery!
  • Insert batteries/rechargeable batteries according to polarity marks (+) and (-) on the battery/rechargeable battery and the product.
  • Use a dry lint-free cloth or cotton swab to clean the contacts on the battery/rechargeable battery and in the battery compartment before inserting!
  • Remove exhausted batteries/rechargeable batteries from the product immediately.

Functioning

The solar cell installed in the product converts sunlight into electrical energy and stores it in 1 Ni-MH rechargeable battery. Switch on the product with the ON/OFF switch 6 . The product will automatically light on as it begins to get dark. The LEDs are a very long-life and energy-saving light source. The light duration depends on the amount of sunlight, the angle of light on the solar cell and the temperature (the battery capacity is temperature-dependent). A vertical angle of light at temperatures above the freezing point is ideal. The rechargeable battery does not achieve maximum capacity until after several charge and discharge cycles.
In summer a completely drained rechargeable battery takes about 2 to 4 days to fully recharge in constant sunlight.

Preparing for use

Assembling of the product (see Fig. A)

HG07137A/HG07137C:

  1. Take out the solar cell housing 2 from the glass jar 5 .
    Note: Take care not to damage the LED light chain 3 .

  2. Move the ON/OFF switch 6 to the ON position to enable the product switching on during darkness.

  3. Put back the solar cell housing 2 into the glass jar 5 .

  4. Your product is ready for use.

HG07137B:

  1. Rotate the solar cell housing 2 anti-clockwise out of the glass jar 5 .
    Note: Take care not to damage the LED light chain 3 .

  2. Move the ON/OFF switch 6 to the ON position to enable the product switching on during darkness.

  3. Insert back the solar cell housing 2 to the glass jar 5 and tighten it by turning it clockwise.

  4. Your product is ready for use.

Setting up the product
  • Hanging up with the handle 4 or standing the product on garden, balcony or patio.
    Note: Make sure before hand that the suspension point is suitable for the weight of the product including batteries (approx. 500 g (HG07137A)/approx. 475 g (HG07137B) / approx. 685 g (HG07137C)).

  • In order to achieve the best result, set the product up in a place where the solar cell will get direct sunlight for as long as possible.

  • Make sure that the solar cell is not influenced by any other source of light such as yard or street lighting as otherwise the product will not come on in twilight.

  • The product automatically switches on in twilight conditions and off again when normal outdoor lighting conditions return.

Replacing the rechargeable battery (see Fig. B)

The battery should be replaced every 12 months to ensure optimum performance.

HG07137A/ HG07137C:

  1. Separate the solar cell housing 2 from the glass jar 5 . Move the ON/OFF switch 6 to the OFF position to switch off the product.
  2. Take out the seal ring (HG07137A only) and screw out the screws 10 from the battery compartment 7 . Separate the battery compartment cover 8 from the battery compartment 7 . Take care not to damage the cables, cable connections and the LED light chain 3 .
  3. Exchange the old rechargeable battery 9 to a new one, ensure that you do not damage the wiring. Take care of the correct polarity, when inserting the new rechargeable battery 9 . The polarity is indicated in the battery compartment 7 . The new rechargeable battery 9 has to have the same like the old one (see “Technical data“).
  4. Now insert the battery compartment cover 8 into battery compartment 7 by screwing up the screws 10 . Insert back the seal ring (HG07137A only) and move the ON/OFF switch 6 to ON position to enable the product switching on during darkness.
  5. Insert the solar cell housing 2 into the glass jar 5 .

Note: Pay attention to the seal ring. Protection class IP44 can only be guaranteed if the sealing ring is properly seated.

HG07137B:

  1. Rotate the solar cell housing 2 anti-clockwise out of the glass jar 5 . Move the ON/OFF switch 6 to the OFF position to switch off the product.
  2. Screw out the screws 10 from the battery compartment 7 . Separate the battery compartment cover 8 from the battery compartment 7 . Take care not to damage the cables, cable connections and the LED light chain 3 .
  3. Exchange the old rechargeable battery 9 to a new one, ensure that you do not damage the wiring. Take care of the correct polarity, when inserting the new rechargeable battery 9 . The polarity is indicated in the battery compartment 7 . The new rechargeable battery 9 has to have the same like the old one (see “Technical data“).
  4. Now insert the battery compartment cover 8 into battery com- partment 7 by screwing up the screws 10 . Move the ON/ OFF switch 6 to ON position to enable the product switching on during darkness.
  5. Put back the solar cell housing 2 to the glass jar 5 .
Charging the rechargeable battery

Note that the product must be switched on when the battery is charging.
The charging time of the battery when the solar cell is used depends on the intensity of the sunlight and the angle of incidence of the light on the solar cell 1 . Place the solar cell as perpendicular as possible to the angle of incidence of the light. In this way you will receive the highest light levels.

Maintenance and care

The LEDs cannot be replaced.
The product is maintenance-free, except for any necessary change of battery.
Clean the product regularly with a dry, lint-free cloth. Use a slightly dampened cloth to remove more stubborn dirt.

Troubleshooting

Note: This product has delicate electronic components. This means that if it is placed near an object that transmits radio signals, it could cause interference. If you notice that the product is malfunctioning, remove any sources of interference from the area of the product.
Note: Electrostatic discharges may cause product to malfunction. In the event of such malfunctions, remove the rechargeable battery briefly and reinsert it.

Error Cause Solution

The light will not switch on even though the sun
shone on the product all day.| Artificial sources of light, e.g. street lighting,
are interfering with the product.| Mount the product in a place where it cannot be disturbed by other sources of light.
The light does not come on or comes on only briefly.| The rechargeable battery is broken or there was not enough daylight.| Replace the rechargeable battery or mount the product in a place where it can receive more sunlight.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

| Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1–7: plastics/20–22: paper and fibreboard/80–98: composite materials.
---|---
| The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.
| Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.
| To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste.
Information on collection points and their opening hours can be obtained from your local authority.

Faulty or used batteries/rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and its amendments. Please return the batteries/rechargeable batteries and/or the product to the available collection points.
Environmental damage through incorrect disposal of the batteries/rechargeable batteries!
Batteries/rechargeable batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste treatment rules and regulations. The chemical symbols for heavy metals are as follows: Cd = cadmium, Hg = mercury, Pb = lead. That is why you should dispose of used batteries/rechargeable batteries at a local collection point.

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product.
Your legal rights are not limited in any way by our warranty detailed below.
The warranty for this product is 3 years from the date of purchase.
The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase.
Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. This warranty becomes void if the product has been damaged, or used or maintained improperly.
The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:
Please have the till receipt and the item number (IAN 386580_2107) available as proof of purchase.
You will find the item number on the rating plate, an engraving on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product.
If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

Service

Service Great Britain
Tel.: 08000569216
E-Mail: [email protected]

IP 44
Serbian mark of conformity

http://www.lidl-service.com

OWIM GmbH & Co. KG
Stiftsbergstraße 1
74167 Neckarsulm
GERMANY
Model-No.: HG07137A/HG07137B/HG07137C
Version: 01/2022
Last Information Update
Stand der Informational: 10/2021 · Ident.-No.:
HG07137A/B/C102021-RS/RO/GR/CY
IAN 386580_2107

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Evergreen User Manuals

Related Manuals