Ultrasone TIO Aluminum High Performance In Ear Headphones Instructions Manual

: June 4, 2024
: ULTRASONE

Table of Contents

Ultrasone

Ultrasone

Ultrasone TIO Aluminum High-Performance In-Ear Headphones

Ultrasone-TIO-Aluminum-High-Performance-In-Ear-
Headphones

Introduction

The Tio from Ultrasone is a pair of stereo earbud headphones with a microphone and a remote built for comfort, durability, and high-quality sound whether travelling or exercising. The Tio is outfitted with a balanced armature micro driver and has an aluminum enclosure. The Tio’s design team at Ultrasone gave special consideration to delivering linear, authentic, and distortion-free audio playback. The connection, which includes a microphone and a remote control, was designed with ease in mind and allows operation for both music and phone conversations. A free Android software for custom headphone setting is provided by Ultrasone on the Google Play Marketplace to further integrate the Tio into your mobile music listening experience. A flight adapter for use on aeroplanes, an OMTP adapter for use with most cellphones, and a charger are also included in the Tio’s packaging.

SPECIFICATIONS

Type	In-Ear
Driver	Single high performance BA-Driver
Frequency Range	19 Hz – 21 kHz
Impedance	18 Ohm
Sensitivity	106 dB
Maximum Output	117 dB
Connectors	3.5 mm stereo mini-jack
Cable Length	3.9′ (1.2 m)
Weight	0.2 oz (5g)
Package Weight	0.55 lb.
Box Dimensions (LxWxH)	6.0 x 6.0 x 2.3″

HOW TO MAKE HEADPHONES MORE DURABLE

Take Care to store them. Your first line of defense should be to store your headphones properly.
Keep the cable and earbuds clean.
Make use of the cleaning tool.
Verify the connections.
Make Sure They’re Dry.
Swap out the sleeves.
Purchase long-lasting listening products.

HOW TO WEAR

With the help of the other hand, pull on your earlobe to make enough room so that you may carefully insert the ear tip into your ear canal. The lower end of the headphone driver, which links the wire to the driver, should face upwards when worn within the ear for the majority of over-the-ear in-ear headphones.

HOW TO PROTECT HEADPHONES

Jack should remain unplugged.
Purchase a headphone case.
Employ the Proper Cable Length.
Never pull the cable.
Do not sit with your earbuds in.
Your enemy is water.
Overwhelmingly, Quality.

Shrink wrap can be added as reinforcement.

Frequently Asked Questions

Can you wear headphones for how long?

When analyzing headphones and hearing loss, the length of exposure to noise is also a crucial consideration. As a general guideline, only spend a total of 60 minutes each day using MP3 players at volumes up to 60% of their maximum, advises Dr.

What causes earbuds to hurt?

The in-ears are too deeply implanted – Your inner ears may become injured if your earbuds or IEMs are inserted too deeply. When the earbuds or IEMs are placed a bit too close to the eardrums, the vibrations they produce can be painful.

Are you able to fix headphones wire?

You’ll need an army knife, a lighter, and heat-shrinking tubing to patch and repair headphone wires and cables. You must strip the cable, remove the wire covering, reattach the wires, and apply heat-shrinking tape or electric tape to finish the repair.

How can I continue to wear my headphones while running?

Your ears are held in place by ear hooks or over-the-ear/around-the-ear designs that clasp around them. As they provide a better and more stable hold than other types of earbuds, these are the best if you intend to wear the headphones while engaging in activities that demand a lot of movement.

How are earphones maintained?

Clean your earbuds or headphones frequently. Ideally, you should use a mildly moist towel to clean the tips of your earbuds or headphone earpads at least once every week. Ensure that your gadget is turned off and the headphones are unplugged. Dry them completely right away with a gentle cloth.

Is using headphones or earbuds while running preferable?

For lengthy use, most runners will likely find on-ear headphones more comfortable than in-ear ones. On-ear headphones have the additional benefit of allowing you to hear traffic and the surrounding environment while you run because they do not completely filter out sound.

If I sleep with my headphones on, will they break?

If you wear headphones to bed, you run the risk of accidently turning up the volume. Long-term damage to your ears from loud music exposure is possible. The typical headphone’s maximum volume ranges from 85 to 110 db.

Do your headphones need to be broken in?

Therefore, it can be said that consumers don’t need to break in their headphones and that doing so won’t make a difference in how they sound.

What can I do to keep ear wax out of my earbuds?

Clean your earbuds both before and after use, as instructed. Avoid wearing in- ear headphones all the time or for an extended amount of time. Be mindful of the condition of your ears.

How frequently should earphones be cleaned?

Experts advise that you should always clean your earbuds completely after each use. Ransone stated that aiming for a once-weekly minimum frequency is fair.