ULTRASONE iSAR Hybrid ANC Bluetooth Headphones User Guide
- October 30, 2023
- ULTRASONE
Table of Contents
- ULTRASONE iSAR Hybrid ANC Bluetooth Headphones
- Product Information
- Technical Specifications
- Product Usage Instructions
- Safety instructions
- Included accessories
- Power and Bluetooth®
- Noise cancelling and transparency
- Calls
- Volume and playback control
- Voice assistant
- Use audio cable
- LED indicator
- Technical parameters and data
- Warranty and service
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ULTRASONE iSAR Hybrid ANC Bluetooth Headphones
Product Information
The ISAR Hybrid ANC headphones are a wireless over-ear model that features Active Noise Cancelling (ANC) and Audio-Transparency-Mode. The headphones come with a USB-C charging cable, a 3.5mm AUX audio cable, and a protective case.
Technical Specifications
- Chipset/Version: QCC3034 + ADI1787
- Profile: A2DP/AURCP/HFP/HSP/SPP/DID/HOGP/PXP/FMP/BAS
- Codec: AAC/SBC/APTX HD
- Wireless Range: 10m
- Battery Life: 32 hours (ANC off), 30 hours (ANC on)
- Charging Time: 2 hours
Product Usage Instructions
Safety Instructions
Please read the safety instructions carefully before using the headphones to avoid any damage or injury.
Included Accessories
The package includes the following:
- 1 x ISAR ANC over-ear headphones
- 1 x Protective case
- 1 x 3.5mm AUX audio cable
- 1 x USB to USB-C charging cable
Your Top Experience
To turn on the headphones, press and hold the Power button until the status indicator lights up blue. The ANC can be turned on by pressing the ANC button, which will cause the status indicator to light up green and flash blue.
Noise Cancelling and Transparency
The headphones feature Active Noise Cancelling (ANC) and Audio-Transparency- Mode. To activate Audio-Transparency-Mode, press the Instant Awareness-Mode button.
Instant Awareness Mode
Press the Instant Awareness-Mode button to activate this mode.
This will allow you to hear your surroundings while listening to music.
Calls
To answer or end a call, double-tap the touchpad on the right earcup. To reject a call, tap and hold the touchpad for 2 seconds.
Volume and Playback Control
Swipe up or down on the touchpad to adjust the volume. To play or pause music, double-tap the touchpad. To skip to the next track, swipe forward on the touchpad. To go back to the previous track, swipe backward on the touchpad.
Voice Assistant
To activate your device’s voice assistant, tap and hold the touchpad for 2 seconds.
Use Audio Cable
You can use the included 3.5mm AUX audio cable to connect the headphones to a device that does not have Bluetooth connectivity.
LED Indicator
The LED indicator will display different colors to indicate various statuses. Refer to the user manual for a detailed explanation of each color and what it means.
Safety instructions
Thank you for your trust and for purchasing the ULTRASONE ISAR Hybrid ANC Bluetooth® headphones. For your best possible listening experience, we would like to provide you with a comprehensive description of how you can use the ULTRASONE ISAR.
- Read these operating instructions carefully and completely before using the product.
- Do not use the product if it is damaged.
- The company ULTRASONE AG assumes no liability for damage to the product or injuries to persons due to careless, improper, incorrect use of the product or use of the product that does not correspond to the purpose specified by the manufacturer.
Avoid health hazards and accidents
- When using the headphones, make sure the volume is set to minimum. Do not adjust the volume until you have put the handset down. To avoid possible hearing damage, do not use your headphones at high volume levels for long periods of time.
- We would like to point out that excessive volume levels and excessive listening times can damage hearing. Hearing damage always represents an irreversible impairment of hearing.
- If you suffer from tinnitus, turn down the volume.
- Always make sure that the volume is appropriate. It is recommended not to use the headphones at high volume for a long time.
- Keep small parts such as product, packaging and accessories away from children and pets. Accidental swallowing may result in suffocation.
- Headphones drastically reduce the acoustic perception of the outside world. The use of headphones in traffic poses a great risk potential. The user‘s hearing must not be impaired to such an extent that road safety is endangered. Please also make sure that you do not use the headphones in the action area of potentially dangerous machines and work equipment.
- Also, avoid using headphones in situations where hearing impairment is important, especially when crossing a level crossing or at a construction site.
ANC function (Active Noise Cancellation)
- Active noise cancellation (ANC) blocks outside noise.
- Never use the active noise canceling (ANC) headphones in situations where hearing impairment is im-portant and could pose a risk to yourself or others, e.g. B. driving a car, riding a bicycle, crossing a railway crossing or walking near traffic.
- Take off the headphones or use them without noise canceling and adjust the volume to make sure you can hear outside sounds like alarms and warning signals.
- Note that sounds such as alarms or warning signals may sound different when wearing headphones.
Liability / Proper Use
- Do not use the product other than as described in this product manual. ULTRASONE AG assumes no liability for improper use of the product or the accessories.
- ULTRASONE AG is not liable for damage to USB devices that do not meet the USB specifications.
- ULTRASONE AG is not liable for damage resulting from disconnections due to empty or old batteries or exceeding the Bluetooth® transmission range.
- Please observe the respective country-specific regulations before commissioning.
Warnings device
- To charge the battery via the integrated Type C USB socket, only use a USB 2.0/3.0 standard-compliant 5V power supply unit.
- WARNING: The batteries (battery pack or batteries installed) shall not be exposed to excessive heat from direct sunlight or fire.
- CAUTION: Do not open the case. Danger of explosion if battery is incorrectly replaced.
- Do not expose the product to rain, snow, liquids or moisture.
Battery warnings
- Do not disassemble the battery.
- Do not use the battery if it may have come into contact with water.
- Do not expose the battery to high temperatures (60°C/140°F). Ambient temperatures that are too high lead to irreversible damage to the battery, especially when the charge level is high.
- If you do not use or store the battery for a long period of time, we recommend bringing the battery to around 50% charge and storing it at a maximum temperature of 30 °C.
- Never expose the battery to excessive heat from direct sunlight or fire.
- Misuse or misuse can damage the battery. In extreme cases there is a risk of: explosion, generation of heat, fire, smoke or gas.
Included accessories
- 1 piece x ISAR ANC over ear headphones
- 1 piece x case
- 1 piece x 3.5 mm AUX audio cable
- 1 piece x USB to USB-C charging cable
Your top experience
- Hybrid active noise cancellation (ANC) for immersive sound.
- New drives in combination with our S-Logic® ensure a full and richer sound.
- Extremely long running time up to 32 hours.
- Fast charging: charge for 10 minutes and enjoy music for 1.5 hours.
- Intuitive, responsive user interface thanks to „Touch Control“.
- Ergonomic, mechanical design of the headphones.
Power and Bluetooth®
-
Turn on device :
Press and hold the power button until the status light turns blue. -
Turn off device:
Press and hold the power button until the status light turns off.
Note
If there is no connection to a Bluetooth® device for 5 minutes or the AUX
cable is unplugged, the device will turn off automatically.
The ULTRASONE ISAR headphones work with any Bluetooth®-enabled device, for example mobile phone, tablet, laptop, TV etc. and can be connected wirelessly.
Connect headphones via Bluetooth®:
Step 1:
Turn on the headphones.
Step 2:
For first use, please press and hold the Bluetooth® button until the status
indicator flashes red and blue. You will hear the voice prompt „Bluetooth®
pairing on“ and the Bluetooth® pairing mode is activated.
Note
Next time you use the headphones, they will automatically connect to the last
one connected device.
Step 3:
Go to your device‘s Bluetooth® menu and select „ISAR“.
Note
If the connection cannot be established successfully or other unexpected
problems appear, turn off the headphones and then turn them on again. Then go
back into Bluetooth® pairing mode.
Step 4:
Once connected, you will hear a voice prompt, „connected,“ and the status
indicator will turn green and flash blue every five seconds.
Charge headphones:
Note
When the headphones battery is low, the status indicator will blink red twice
every 5 seconds and you will hear the voice prompt “battery low”.
Step 1:
Connect the supplied USB-C charging cable to the headphones via the USB-C
port.
Step 2:
Connect the cable to a suitable power supply (not included).
Note
The status indicator glows red while charging. Once the device is fully
charged, the status indicator lights up green.
Note
The device cannot be turned on or used while charging.
Step 3:
After successful charging, disconnect the charging cable from the headphones.
The device is then ready for use again.
Noise cancelling and transparency
Switching between normal mode / ANC mode / ambient sound:
Press the ANC button to switch between the different modes. A voice prompt
appears telling you which mode you are in.
ANC mode:
Active Noise Cancellation isolates your listening experience to the sound
coming through the headphones, helping to block out unwanted outside noise.
Press the ANC button to turn on active noise cancellation
(ANC mode). You will hear a voice prompt telling you which mode you are in.
Note
ANC mode is activated automatically when you turn on the device. When ANC mode
is active, the status indicator is solid green.
Ambient Sound:
Ambient Sound allows you to hear sounds around you through the built-in
microphones even when using the headphones. Background noises such as
important announcements or traffic can thus be heard more clearly. Press the
ANC button to turn on Ambient Sound Mode. You will hear a voice prompt telling
you which mode you are in.
Switch off ANC mode and ambient sound (normal mode):
Press the ANC button to turn on Normal mode. Thus, the ANC mode and ambient
sound are switched off. You will hear a voice prompt telling you which mode
you are in.
Instant awareness mode
The headphones have a multifunction touchpad located above the right ear cup. Use the gesture below to use “Instant Awareness Mode”.
Step 1:
Place your palm on the right ear cup. The music will instantly turn down and
you will be in „Instant-Awareness Mode“.
Note
„Instand Awareness Mode“ stays active as long as your palm is on the earcup.
Step 2:
Rest your palm from the right earcup to turn off „Instant Awareness Mode“ and
return to normal mode.
Calls
The headphones have a multifunction touchpad located above the right ear cup. Use the gestures below to answer, end, or reject calls.
Accept a call:
Double-tap the touchpad quickly to answer a call.
To end a call:
Double-tap the touchpad quickly to end a call.
Note
The ANC (active noise cancellation) function cannot be used during a call.
Reject incoming call:
During an incoming call, touch and hold the touchpad to reject a call.
Volume and playback control
The headphones have a multifunction touchpad located above the right ear cup. Use the following gestures to control audio playback.
Play or pause music:
Quickly double-tap the center of the touchpad to play or pause music.
Next track:
Swipe forward on the touchpad to play the next track.
Previous title:
Swipe backwards on the touchpad to play the previous track.
The headphones have a multifunction touchpad located above the right ear cup. Use the following gestures to control the volume.
Increase volume:
Slowly swipe up from the bottom edge of the touchpad to increase the volume.
Decrease volume:
Slowly swipe down from the top edge of the touchpad to decrease the volume.
Voice assistant
The headphones have a multifunction touchpad located above the right ear cup. Use the gestures below to use your device‘s voice assistant.
Activate voice assistant:
Touch and hold the touchpad until your device‘s default voice assistant is
activated.
Disable voice assistant:
Touch and hold the touchpad again until your device‘s default voice assistant
is disabled again.
Use audio cable
Not only can you use the ULTRASONE ISAR wirelessly via Bluetooth®, you can also plug it into your end device using the 3.5 mm AUX audio cable supplied and use it wired.
Connect headphones using an audio cable:
Step 1:
Plug one end of the 3.5mm AUX audio cable into the dedicated 3.5mm AUX port on
the bottom of the right ear cup.
Step 2:
Plug the other end of the 3.5 mm AUX audio cable into the 3.5 mm AUX port
provided on your end device.
Note
When using the audio cable, the volume and playback controls must be
controlled from the source device.
Note
If you unplug the audio cable and are not connected via Bluetooth®, the
headphones turn off.
Note
If you want to use ANC mode or Ambient Sound, please make sure the audio cable
is plugged in properly.
LED indicator
The ULTRASONE ISAR headphones have two indicators: the status indicator and the charging indicator. Both LED displays are explained in the following overview.
Technical parameters and data
- Model: ISAR Hybrid ANC
- Wireless charging: no
- Audio transparency mode: Yes
- Touch control: yes
- Playing time: ≥ 32 hours
- Fast loading: yes
- Active noise cancelling (ANC): yes
- Multi-point technology: yes (allows you to connect two devices at the same time)
Technical specifications
- Headphone weight: 246 g
- Impedance: 32 Ω
- Driver type: dynamic
- Washable: yes (IPX5)
- Frequency range: 20 Hz – 20 kHz
- Sensitivity: 95 dB
- Driver diameter: 40 mm
- Magnet type: neodymium
- Sweat resistant: yes (IPX5)
- Battery capacity: 900 mAh.
Bluetooth® specifications
- Bluetooth®: 5.0
- Profile: A2DP/AURCP/HFP/HSP/SPP/DID/HOGP/PXP/FMP/BAS
- Codec: AAC/SBC/APTX HD
- Battery life: ≥ 32 hours
- Headphone charging time: ≤ 3 h
- Chipset/version: QCC3034 + ADI1787
- Bluetooth® range: ≥ 15m
- Battery life: ≥ 30 hours (in ANC mode)
- Standby time: 280 hours
Warranty and service
- If you have any questions about the ULTRASONE product you have purchased or about other products from ULTRASONE AG, please contact us at any time.
- Our dedicated customer service team will do their best to find a quick answer to your questions and offer the best solutions.
- ULTRASONE AG offers you 1 year after-sales service for your purchased product.
ULTRASONE AG
- Gut Raucherberg 3
- 82407 Wielenbach
- Germany/Bavaria
- 49 (0) 881 9011500
- info@ultrasone.com
- www.ultrasone.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>